ANYFAR KPL064 Wireless CarPlay Android Auto Adapter User Manual

Important Safety Instructions

Please follow these instructions carefully to actively reduce the risk of electronic shock, and injury to persons or property.

• Keep all crevices and openings of the product unblocked.
• Do not set the product on a heating register or over a radiator.
• Ensure that you provide proper ventilation at the installation site.
• Do not use while standing in or nearby water (e.g., bathtubs, kitchen sinks, or swimming pools).
• Do not use it unless your body - and especially your hands - are completely dry.
• Never insert objects of any kind into the product vents as that may result in fire or electric shock.
• Do not use liquid cleaners, aerosol cleaners, chemicals, or cleaning agents to clean this product.
• Clean this product with a soft, damp cloth.
• Do not disassemble this product.

If your device requires service or repair work, please contact our Support Department. Read and understand all instructions and save them for future reference. Follow all warnings and instructions as marked on the product. Save these instructions.

Introduction

Thank you for purchasing this adapter. This user guide will provide comprehensive information to maximize the utility of your adapter. We kindly request that you review the instructions diligently. It's important to note that wireless Android Auto function only works in the smart phone built in this app and equipped with 5GHz Wi-Fi.

Product Overview

The ANYFAR KPL064 is a compact and powerful 2-in-1 wireless adapter designed to convert your car's wired CarPlay and Android Auto systems into wireless ones. Enjoy seamless integration with your smartphone, providing access to navigation, music, calls, and voice assistants without the need for cables.

Key Features:

• Dual-Port Design: Equipped with both USB and Type-C ports for versatile connectivity without extra adapter cables.
• Wireless CarPlay: Easily upgrades wired CarPlay to wireless, supporting Siri, GPS navigation, and other functions.
• Wireless Android Auto: Converts wired Android Auto to wireless, supporting Google Assistant, GPS navigation, etc.
• Plug and Play: Simple installation by plugging into a data-enabled USB port, searching for Bluetooth, and allowing requests.
• 5GHz WiFi Transmission: Ensures stable and efficient data transmission for a smooth experience.
• OTA Upgrade: Supports over-the-air firmware updates for continuous optimization and problem resolution.
• Broad Compatibility: Compatible with over 98% of wired CarPlay and Android Auto vehicles on the market.

Compatibility

To ensure compatibility, please verify your car and smartphone meet the following requirements:

Car Compatibility:

This product is suitable for models with original wired CarPlay or wired Android Auto. If your car only has wired CarPlay but does not have wired Android Auto, the wireless Android Auto function will not work with this adapter.

• Search for compatible CarPlay models on the Apple website: https://www.apple.com/ios/CarPlay/available-models/
• Search for compatible Android Auto models on the Android website: https://www.android.com/auto/compatibility/

Smartphone OS Version:

• Wireless CarPlay: Requires iOS 10 or Newer.
• Wireless Android Auto: Requires Android 11 or Newer, and the phone must be equipped with 5GHz Wi-Fi.

Setup and Installation

Follow these steps to set up your ANYFAR KPL064 adapter:

1. Connect the Adapter to Your Vehicle

Plug the KPL064 adapter into the USB port of your vehicle. This port may be marked with a CarPlay car icon or a smartphone icon. Ensure it's a data-enabled USB port.

2. For iPhone (Wireless CarPlay)

1. Before pairing with the adapter, please forget any previously connected Bluetooth and Wi-Fi devices on your iPhone, such as the factory car Bluetooth or a Wi-Fi dashcamera.
2. Turn on your iPhone's Wi-Fi and Bluetooth.
3. Pair your iPhone to the Bluetooth device named "SmartBox-xxxx" (where xxxx is a unique identifier).
4. On the iPhone pop-up notifications, tap "Pair", then "Allow" for contacts and favorites sync, and finally "Use CarPlay".
5. The adapter will connect to wireless CarPlay after a few seconds.

3. For Android (Wireless Android Auto)

1. Before pairing with the adapter, please forget any previously connected Bluetooth and Wi-Fi devices on your Android phone, such as the factory car Bluetooth or a Wi-Fi dashcamera.
2. Turn on your Android smartphone's Wi-Fi and Bluetooth.
3. Pair your Android phone to the Bluetooth device named "SmartBox-xxxx".
4. On the Android smartphone pop-up notifications, tap "Pair" and "Allow".
5. The adapter will connect to wireless Android Auto after a few seconds. Note: Unlike CarPlay, Android Auto may not display a prompt image after the initial connection. If you need to reconnect, you might need to forget the current device and reconnect.

Operating Instructions

Once connected, the KPL064 adapter enables a seamless wireless experience for CarPlay and Android Auto, retaining your car's original control methods.

Automatic Connection:

After the initial setup, the adapter will automatically connect to your paired smartphone when you start your car, providing instant access to CarPlay or Android Auto.

Retain Original Car Controls:

The adapter allows you to use your car's existing controls for navigation, music, and calls, including:

• Touch Screen Control
• OEM Knob Control
• Steering Wheel Control
• Voice Control (Siri for CarPlay, Google Assistant for Android Auto)

Core Functions:

• Navigation: Use your preferred navigation apps (e.g., Apple Maps, Google Maps) directly on your car's display.
• Music Playback: Stream music from your favorite apps (e.g., Apple Music, Spotify) with full control.
• Hands-Free Calling: Make and receive calls safely using the car's interface and voice commands.
• Voice Assistant: Activate Siri or Google Assistant for hands-free commands, messages, and information.

Online Upgrade (OTA)

The KPL064 adapter supports Online Over-The-Air (OTA) firmware upgrades to ensure optimal performance and introduce new features.

Important Note:

• Please do NOT plug the adapter into the car stereo to perform the upgrade. Many car stereo USB ports may lose power during the update process, which can cause the adapter to fail.
• Always plug the adapter into a stable power supply source, such as a phone charger or a computer's USB port, for upgrades.

Upgrade Steps:

1. Connect your iPhone to the adapter's Wi-Fi network. The Wi-Fi password is 12345678. If your phone cannot find the Wi-Fi, manually join the adapter Wi-Fi network [SmartBox-xxxx].
2. On your iPhone's browser, enter 192.168.200.1.
3. If an upgrade is available, tap the "upgrade" button to start the process.

Specifications

Troubleshooting

Q: What should I do if there is no response when I plug in the product?

A:

1. Replug the adapter.
2. Pull out the product, then check if the original car's wired Apple CarPlay/Android Auto can be used normally.
3. If it still not working, please contact us to get a replacement.

Q: Can't connect automatically.

A:

1. Please turn on your phone's Bluetooth and WLAN, and make sure both Bluetooth and WLAN do not connect to other devices. Neglect the original car Bluetooth.
2. Replug the adapter. If it doesn't work, then forget this adapter's Bluetooth on phone. Reboot your phone and repair the Bluetooth.
3. If it still doesn't help, please reference the Online Upgrade steps to upgrade the firmware.

Q: When stuck in the connection state, and it keeps connecting, what should I do?

A:

1. Please click settings - clear pair list, and ignore the Bluetooth pairing record on the phone, then restart your phone.
2. Restore the factory settings of the original car.

Q: My phone can identify the product Bluetooth/WiFi, but my car does not enter the connection page.

A:

1. Reset the box: Use your phone to scan the QR code below or enter 192.168.200.1 on iPhone's or Android smart phone browser. Then select the Factory reset.
2. Restore the factory settings of your original car system.

Warranty and Service

If we repair or replace a product, the repaired or replaced product shall be warranted for the remaining time of the original warranty period. If you are not satisfied with your purchase for any quality problem, you shall return the item in its original condition within 30 days of receipt and we will gladly provide a refund, replacement, or an exchange. Any items received after 30 days will not be accepted for refund. For any items received after 30 days, we will provide repair service during the warranty period.

Our warranty does NOT cover the following situations:

• Warranty expired.
• Damage caused by human factors, accident, misuse of the product.
• Products purchased from unauthorized channels.
• Unauthorized alternation to change of parts or components of the product.
• Fail to provide a receipt or proof of purchase.
• Malfunctions caused by phenomena such as fire, natural disasters.

For speedy processing of your warranty claim you will need:

• Copy of the receipt showing the purchase date.
• Reason for the claim (description of the defect).