SUMREDA GH60 Wooting 60HE ACE60 Aluminum Keyboard Case User Manual

1. Product Overview

The SUMREDA GH60 Wooting 60HE ACE60 Aluminum Keyboard Case is a premium replacement shell designed for 60% layout mechanical keyboards. Crafted from durable aluminum, it provides a robust and aesthetically pleasing housing for your keyboard components. This case is compatible with a wide range of 60% PCBs and plates, offering an excellent upgrade for enthusiasts looking to customize their typing experience.

Figure 1: Available color options for the aluminum keyboard case.

2. Specifications

3. Setup and Installation

This section guides you through the process of installing your keyboard components into the SUMREDA aluminum case. Ensure you have all necessary tools, such as a small screwdriver set, before beginning.

3.1 Compatibility Check

Verify that your keyboard's PCB (Printed Circuit Board) and plate are compatible with standard GH60 mounting holes. This case is designed to fit 60% layout keyboards with 61 keys. If you are unsure about compatibility, please consult your keyboard's original documentation or contact the manufacturer.

3.2 Disassembly of Existing Keyboard (if applicable)

1. Carefully remove all keycaps from your existing keyboard.
2. Using an appropriate tool, remove the switches from the plate.
3. Unscrew and detach the PCB and plate assembly from your old keyboard case. Disconnect any cables (e.g., USB, battery) from the PCB.
4. Gently separate the PCB from the plate, if they are not permanently attached.

3.3 Case Assembly

1. Place your keyboard's PCB onto the bottom half of the SUMREDA aluminum case, aligning the screw holes.
2. If your PCB and plate are separate, attach the plate to the PCB first, then place the assembly into the case.
3. Secure the PCB/plate assembly to the bottom case using the provided screws. Do not overtighten.
4. If you removed switches, re-install them into the plate, ensuring they are properly seated.
5. Connect any necessary internal cables (e.g., USB daughterboard, battery) if your PCB requires them.
6. Carefully place the top half of the aluminum case over the assembled components, ensuring all edges align.
7. Secure the top and bottom halves of the case together using the remaining screws.
8. Re-install all keycaps onto the switches.

Figure 2: Detailed views of the case interior and exterior, highlighting mounting points.

Figure 3: Front, side, and bottom views of the aluminum case, showcasing design elements.

3.4 Visual Guide: Manufacturing and Assembly Process

4. Maintenance

Proper care will ensure the longevity and appearance of your aluminum keyboard case.

4.1 Cleaning

• Use a soft, lint-free cloth, slightly dampened with water or a mild, non-abrasive cleaner, to wipe down the aluminum surface.
• Avoid using harsh chemicals, abrasive pads, or solvents, as these can damage the finish.
• For hard-to-reach areas, a soft brush or compressed air can be used to remove dust and debris.

4.2 General Care

• Avoid dropping the keyboard or subjecting it to strong impacts, which can dent or scratch the aluminum.
• Keep the keyboard away from excessive moisture or extreme temperatures.
• Periodically check the case screws to ensure they remain snug. Tighten gently if necessary, but do not overtighten.

5. Troubleshooting

Here are some common issues and their solutions:

5.1 Keyboard Components Do Not Fit

• Issue: The PCB or plate does not align with the case's mounting holes.
• Solution: Double-check the compatibility of your specific PCB/plate model with standard GH60 mounting. Some 60% layouts may have slight variations. Ensure the PCB is oriented correctly within the case.

5.2 Loose or Rattling Components

• Issue: After assembly, parts of the keyboard feel loose or produce rattling sounds.
• Solution: Carefully re-open the case and ensure all screws securing the PCB/plate assembly are tightened appropriately. Check that switches are fully seated in the plate and that the top and bottom case halves are securely fastened.

5.3 Scratches or Dents on Case

• Issue: The aluminum case has cosmetic imperfections.
• Solution: Aluminum is a durable material, but it can scratch or dent with rough handling. Minor scratches can sometimes be buffed out with specialized aluminum polishing compounds, but deep scratches or dents are permanent. Handle the case with care to prevent future damage.

6. User Tips

• Use the Right Tools: Always use screwdrivers that precisely fit the screw heads to prevent stripping.
• Gentle Handling: When installing or removing components, apply gentle, even pressure to avoid bending or damaging the PCB or plate.
• Organize Components: Keep track of all screws and small parts during disassembly and reassembly to ensure nothing is lost.
• Test Before Final Assembly: After installing the PCB and switches but before fully closing the case, connect the keyboard to a computer to test all keys and lighting functions.

7. Warranty and Support

For any issues not covered in this manual, or for warranty claims, please contact the SUMREDA Keyboard Store customer service. Keep your purchase receipt as proof of purchase. Specific warranty terms and conditions may apply and are available upon request from the seller.