LAUNCH CRP129E V3.0

Contents

LAUNCH X431 CRP129E V3.0 4 System Diagnostic Tool User Manual

Model: CRP129E V3.0 | Brand: LAUNCH

1. Overview

The LAUNCH X431 CRP129E V3.0 is a professional automotive inspection tool designed for comprehensive vehicle diagnostics. It assists both professional technicians and DIY enthusiasts in identifying and resolving vehicle issues efficiently. This tool offers advanced diagnostic capabilities for key vehicle systems and a wide range of reset services.

1.1 Key Features

  • 4-System Diagnosis: Engine, Transmission, ABS (Anti-lock Braking System), and SRS (Supplemental Restraint System/Airbag).
  • 12+ Reset Services: Including Oil Reset, SAS Reset, Brake Reset, BMS Reset, DPF Reset, ABS Bleeding, AFS Reset, AdBlue Reset, Injector Coding, TPMS Reset, Throttle Adaptation, and A/F Reset.
  • Full OBD2 Functions: Supports all 10 OBD-II test modes for comprehensive emission-related diagnostics.
  • Auto-VIN Smart Diagnostic: Automatically identifies vehicle information for quicker diagnosis.
  • Lifetime Free Update: Online updates via Wi-Fi to ensure the latest software version and vehicle coverage.
  • Battery Voltage Test: Monitors real-time battery voltage.
  • Multi-Language Support: Supports 11 languages including English, Spanish, French, German, Italian, Russian, Japanese, Korean, Portuguese, and Polish.
  • User-Friendly Interface: Features a 5-inch touch HD screen (1280*720 resolution) and Android operating system.
  • Diagnostic Report: Generates and allows sharing/printing of diagnostic reports.

1.2 Vehicle Coverage

This diagnostic tool is designed to work with all OBD II compliant vehicles, including Controller Area Network (CAN), covering 90+ global brands and models from 1996 to 2024. It supports a wide range of passenger cars, pickups, light-duty trucks, and SUVs across USA, Europe, and Asia.

Supported Car Brands include: AUDI, OPEL, AUTOSEARCH (VIN self identification), PEUGEOT, BENZ (Mercedes/Maybach), PORSCHE, BMW (BMW/Brilliance BMW/Rolls Royce/Mini), RENAULT, CHRYSLER (Chrysler/Dodge/Jeep), SAAB, CITROEN, SEAT, DAEWOO, SKODA, DEMO, SMART, SPRING, FIAT, SUBARU, GM (GM/Chevrolet/Cadillac/Buick), SUZUKI, HONDA, TOYOTA, Hyundai, USAFORD (Ford/Lincoln/Chang'an Ford), JAGUAR, Volvo, JPISUZU, VW (Volkswagen/Bentley/Bugatti/Lamborghini), KIA, LAND ROVER, MAZDA, MITSUBISHI, NISSAN.

Image showing global vehicle coverage and supported languages
Figure 1: Global Vehicle Coverage and Supported Languages. The tool covers 90+ brands from 1996-2024 across USA, Europe, and Asia, and supports 11 languages.
Video 1: Product demonstration highlighting key features and ease of use.

2. Setup

2.1 Components & Controls

Diagram of the diagnostic tool showing labeled components
Figure 2: Main Unit and Accessories. The image shows the diagnostic tool, OBDII diagnostic cable, charging cable, quickly start guide, user manual, and carrying bag.
  1. Charging LED: Red indicates charging, Green indicates fully charged.
  2. LCD: Displays test results and user interface.
  3. USB Type-C port: For connecting the charging cable.
  4. DB-15 Diagnostic Connector: For connecting to the vehicle's DLC.
  5. Power Button: Turns the tool on or off.

2.2 Technical Specifications

FeatureSpecification
Communication InterfaceOBD-II
Display Resolution1280*720
Display Size5" touch HD screen
RAM2 GB
Memory (Storage)32 GB
Battery6100mAh (Lithium Polymer)
OBD II Interface Input Voltage9V~18V (Supports 12V Car, not 24V Truck)
Charging viaDC 5V 2A charging cable or diagnostic cable
Operating SystemAndroid
Software UpdateYes (Lifetime Free Update)
LanguageEnglish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish
Dimensions228 mm x 125 mm x 34 mm
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Charging Temperature0°C to 40°C (32°F to 104°F)
CertificationCE

2.3 Packing List

The following items are included in the product package:

  • Diagnostic tool x 1 (Main Unit)
  • OBD II diagnostic cable x 1
  • Charging cable x 1
  • User manual x 1
  • Carrying bag x 1
Image showing the contents of the product package
Figure 3: Package Contents. The image displays the diagnostic tool, OBDII cable, charging cable, user manual, and carrying bag.

2.4 Charging the Tool

There are two methods to charge the diagnostic tool:

  1. Via Charging Cable: Plug one end of the included charging cable into the Type-C port of the tool, and the other end into an external power supply device.
  2. Via Diagnostic Cable: Insert one end of the diagnostic cable into the DB-15 connector of the tool, and the other end into the vehicle's DLC.

The Charging LED will illuminate solid green when the battery is fully charged.

2.5 Getting Started (Initial Use)

For first-time use, follow these steps to set up the system:

  1. Press the power button to turn the tool on.
  2. On the welcome page, tap Start.
  3. Select your desired system language from the list (e.g., English, Spanish, French) and tap Next step.
  4. Screenshot of the language selection screen
    Figure 4: Language Selection Screen. Choose your preferred language for the device interface.
  5. Choose the desired time zone and tap Next step to proceed to the WLAN setup screen.
  6. Slide the Wi-Fi switch to ON. The system will search for available wireless networks. Select your desired WLAN access point/network.
    • If the network is open, it will connect directly.
    • If the network is encrypted, enter the correct security key (network password).
  7. Screenshot of the network setting screen
    Figure 5: Network Setting Screen. Connect to a Wi-Fi network for updates and online features.
  8. After network connection, tap Next step to configure workshop information. Input the required details and tap Next step. (Note: Workshop information will be automatically added to reports after successful configuration).
  9. Read the user agreement, check the box for 'Agree to all the above terms', and tap OK to finish the sign-up process and navigate to the Job Menu.

2.6 Connecting to the Vehicle

  1. Turn the vehicle ignition off.
  2. Locate the vehicle's 16-pin Data Link Connector (DLC). The DLC is typically located under the dashboard, near the driver's side. Refer to your vehicle's service manual if you cannot find it.
  3. Diagram showing common DLC locations in a vehicle
    Figure 6: Data Link Connector (DLC) Location. Common locations include under the hood or by the radiator. A 16-pin connector is standard for OBD II compliant vehicles.
  4. Plug one end of the diagnostic cable into the vehicle's DLC port, and the other end into the DB-15 diagnostic connector of the tool. Tighten the captive screws.
    • A plastic DLC cover may need to be removed on some vehicles.
    • The cable connector is keyed and will only fit one way. Do not force it.
  5. Turn the vehicle ignition on (engine can be off or running).
  6. Press the power button on the tool for several seconds to turn it on and enter the Job Menu.

Caution: Do not connect or disconnect any test equipment while the ignition is on or the engine is running, as this may cause damage to the tool or vehicle.

3. Operating the Tool

3.1 Job Menu

The main menu screen provides access to the following function modules:

  • Local Diagnose: Configures the tool for professional diagnostics.
  • Service Function: Offers coding, reset, relearn, and other service functions.
  • Other Modules: Includes add-on modules to extend functionalities.
  • Upgrade: Updates vehicle diagnostic software and APK.
  • Mall: Subscribes to extra diagnostic or reset software.
  • Know Your Customer: Assists repair shops with business analysis, customer management, and statistics.
  • Mine: Manages saved reports, order information, and system settings.
  • Toolbox: Accesses battery voltage test, diagnostic software clear, firmware fix, DTC library, diagnostic record, DLC lookup, feedback, image management, and product manual.
  • More: Includes Online support and LAUNCH Academy.

3.2 System Diagnostics

This function is used to diagnose electronic control systems of a single vehicle model. Supported systems and functions vary by product configuration.

3.2.1 Smart Diagnosis (Auto-Detect)

This feature quickly accesses vehicle electronic control systems by decoding the Vehicle Identification Number (VIN), eliminating manual menu selection.

  1. Ensure 'Automatic detection on connect' is set to On in Mine -> Settings.
  2. After connecting the tool and turning the ignition on, the system will automatically detect the VIN.
  3. Once VIN information is obtained, confirm it and tap OK to start diagnosing all available systems. A diagnostic report will be generated automatically.
  4. If the tool fails to access VIN information, you may need to manually enter the VIN.

Note: A stable network connection is recommended for successful VIN access. Not all cars support Auto-Detect due to manufacturer settings.

3.2.2 Manual Diagnosis

If Auto-Detect fails, you can perform diagnosis manually:

  1. Select Local Diagnose from the Job Menu.
  2. Choose AutoDetect (if 'Automatic detection on connect' is Off) or proceed with manual selection.
  3. Select the vehicle manufacturer, model, and year.
  4. Select the desired test item (e.g., Read Version Information, Read Fault Code, Clear Fault Code, Read Data Stream).
Image illustrating multi-system diagnostics for Engine, Transmission, ABS, SRS
Figure 7: Multi-System Diagnostics. The tool can read/clear codes, view data stream, and read vehicle information for SRS, Engine, Transmission, and ABS systems.

3.2.3 Health Report (Quick Test)

This function quickly accesses all electronic control units (ECUs) and generates a detailed report on vehicle health. Tap Health Report on the test item selection screen to start scanning. Fault codes will appear in red, and normally working systems in green.

3.2.4 Read Fault Code

Displays detailed information of Diagnostic Trouble Codes (DTCs) retrieved from the vehicle's control system. Tap Read Fault Code to view diagnostic results.

3.2.5 Clear Fault Code

Erases DTCs from the vehicle's computer after repairs. Ensure the ignition key is in the ON position with the engine off before performing this function. Clearing DTCs does not fix the underlying problem; proper repairs must be made.

3.2.6 Read Live Data Stream

Retrieves and displays live data and parameters from the vehicle's ECU. Data can be viewed as values, graphs, or combined graphs for comparison. Up to 8 data stream items can be selected simultaneously.

3.2.7 Read Freeze Frame

Captures a snapshot of operating conditions at the moment an emission-related fault occurs.

3.2.8 OBDII Diagnostics (Full 10 Modes)

This option provides a quick way to check for DTCs, isolate MIL causes, check monitor status, and verify repairs. After connecting to the DLC, tap OBD II on the Local Diagnose screen. The tool will automatically identify the communication protocol and display the Monitor Status. Tap OK to access the following functions:

  • Read I/M Readiness: Checks if emission-related systems are operating properly and ready for inspection.
  • Read Live Data: Retrieves and displays live data parameters.
  • Read Freeze Frame: Displays operating conditions when a fault occurred.
  • Read Fault Code: Identifies malfunctioning emission control system sections.
  • Clear Fault Code: Erases codes from the vehicle.
  • Test Results: On-Board Monitoring Test: Retrieves test results for non-continuously monitored powertrain components.
  • Control Operation of On-Board Component/System: Accesses vehicle-specific subsystem and component tests.
  • Read Vehicle Information: Displays VIN, Calibration ID (CID), and Calibration Verification Number (CVN).
  • EU OBFCM: Monitors On-Board Fuel Consumption data for CO2 emissions and fuel/energy consumption compliance with EU regulations.
Image detailing the 10 full OBDII functions
Figure 8: Full 10 OBDII Functions. Includes Read Codes, Erase Codes, Live Data, On-Board Monitor Test, I/M Readiness, Freeze Frame, O2 Sensor Test, EVAP Test, VIN Scan, and Component Test.

3.2.9 History

The tool records every diagnostic session. The History function provides direct access to previously tested vehicles, allowing you to resume from the last operation or view past diagnostic records.

3.3 Service Functions (12+ Hot Reset Services)

These functions help restore vehicle systems to functional status after repair or replacement. Available tests vary by vehicle manufacturer, year, and model. Updates are recommended for new service functions.

Image showing 12+ hot reset services
Figure 9: 12+ Hot Reset Services. Includes Oil Reset, SAS Reset, Throttle Matching, D.P.F Reset, ABS Reset, Brake Reset, BMS Reset, TPMS Reset, Adblue Reset, Injec Reset, AFS Reset, A/F Reset.

To perform a reset operation:

  1. Select Service Function from the Job Menu.
  2. Choose the desired service function (e.g., Oil Reset, ABS Bleeding).
  3. Select the desired car brand.
  4. Select the reset mode (Manual Reset or Auto Reset).
  5. Follow the on-screen instructions to proceed.

Specific Reset Services:

  • ABS Bleeding: Removes air from the brake system after component replacement.
  • AdBlue Reset: Resets operation after diesel exhaust fluid replacement/refill.
  • AFS Reset: Resets/recalibrates the Adaptive Front-lighting System.
  • A/F Reset: Sets or learns Air/Fuel ratio parameters.
  • Injector Coding: Writes or rewrites injector codes to the ECU for accurate injection quantity control.
  • BMS Reset: Resets the vehicle battery monitoring unit, clearing low battery fault info and performing battery matching.
  • DPF Reset: Clears Particulate Matter from the Diesel Particulate Filter.
  • TPMS Reset: Looks up tire sensor IDs, resets tire pressure, and turns off the TPMS MIL.
  • Oil Light Reset: Resets the Oil Life Reminder and turns off the Oil Light after an oil change.
  • SAS Reset: Performs Steering Angle Sensor calibration, setting the SAS angle to zero.
  • EPB Reset: Activates/deactivates the brake system for disc/pad changes and reads/resets EPB-related codes.
  • Throttle Adaptation: Makes initial settings to throttle actuators after replacement or cleaning.

3.4 Toolbox Functions

The Toolbox provides access to various utility functions:

  • Battery Voltage: Measures the current voltage of the vehicle's battery.
  • Diagnostic Software Clear: Deletes infrequently used diagnostic software.
  • Firmware Fix: Upgrades and fixes diagnostic firmware. Do not interrupt power during this process.
  • DTC Library: Retrieves detailed descriptions of DTCs from the database.
  • Diagnostic Record: Stores running parameters or waveform graphs recorded by the user.
  • DLC Lookup: Helps find the location of the vehicle's DLC.
  • Feedback: Sends diagnostic problems to LAUNCH for analysis and troubleshooting.
  • FAQ: Lists frequently asked questions and answers.
  • Image: Manages and shares screenshots.
  • Product Manual: Provides quick access to the integrated operation manual.

3.5 Upgrade

If new software or APK updates are available, a numeric indicator will appear on the Upgrade module. It is strongly recommended to update regularly for new functions and better service.

  1. Tap Upgrade on the Job Menu.
  2. By default, all diagnostic software is selected. Deselect specific software if needed.
  3. Tap Update to start downloading. You can pause (Stop), resume (Continue), or retry (Retry) downloads.
  4. Once downloaded, software packages will install automatically.

Note: A stable network connection is required for upgrades. The free subscription for default software needs renewal after expiration to continue receiving new updates.

3.6 Mine

The Mine module allows you to manage personal settings and data:

  • My Report: Checks and manages saved diagnostic reports, sorted by date and make.
  • My Order: Checks order information.
  • Settings: Configures system preferences:
    • Units of measurement: Sets metric or English units.
    • Screen capture: Toggles the screen capture icon.
    • Automatic detection on connect: Enables/disables automatic VIN detection.
    • Display/Brightness: Adjusts standby time and screen brightness (reducing brightness conserves power).
    • Sound: Adjusts volume and other sound settings.
    • Network: Manages WLAN connections for registration, updates, and email.
    • Time zone: Sets the device's time zone.
    • Language: Changes the system language.
    • Workshop information: Configures workshop details for reports.
    • Recovery: Resets the tool to default factory settings (Warning: may cause data loss).
    • Clean up: Clears cache files and frees up storage space.
    • About: Displays hardware configuration and license agreement.

3.7 Other Modules

Currently, only the BTS (Battery Test System) test is available as an add-on module. This module requires a specific Bluetooth battery tester (sold separately) to function.

4. Maintenance

4.1 Cleaning the Tool

Keep the tool dry, clean, and free of oil, water, or grease. Use a mild detergent on a clean cloth to clean the enclosure of the device when necessary.

4.2 Battery Care

The tool contains an internal Lithium Polymer battery. To reduce the risk of fire or burns, do not disassemble, crush, pierce, or dispose of the battery in fire or water. Never leave the device unattended during charging; place it on a non-flammable surface.

4.3 Software Updates

Regularly check for and install software updates via the Upgrade module to ensure optimal performance, access to new features, and expanded vehicle compatibility.

5. Troubleshooting

5.1 Diagnostic Trouble Codes (DTCs)

OBD II Diagnostic Trouble Codes are five-digit alphanumeric codes stored by the vehicle's computer in response to a problem. They indicate a particular problem area. The 1st character (B, C, P, or U) identifies the main system (Body, Chassis, Powertrain, or Network). The 2nd character (0-3) identifies the code type (Generic or Manufacturer-Specific). The 3rd character (0-9, A-F) identifies the specific system or sub-system. The 4th and 5th characters (0-9, A-F) identify the malfunctioning section.

Important: Do NOT replace parts based only on DTCs. Always consult the vehicle's service manual for proper testing procedures and flow charts to confirm the problem's location.

5.2 Auto-Detect (VIN) Failure

If the tool fails to automatically detect the VIN, ensure a stable network connection. If the issue persists, you may need to manually enter the VIN. Not all vehicles support the Auto-Detect function due to manufacturer settings.

5.3 General Diagnostic Advice

  • Always perform automotive testing in a safe environment.
  • Wear safety eye protection that meets ANSI standards.
  • Keep clothing, hair, hands, tools, and other objects away from moving or hot engine parts.
  • Operate the vehicle in a well-ventilated work area as exhaust gases are poisonous.
  • Chock the drive wheels and never leave the vehicle unattended while running tests.
  • Use extreme caution when working around ignition coils, distributor caps, ignition wires, and spark plugs due to hazardous voltages.
  • Put the transmission in P (for A/T) or N (for M/T) and ensure the parking brake is engaged.
  • Keep a fire extinguisher suitable for gasoline/chemical/electrical fires nearby.

6. Specifications

FeatureSpecification
Communication InterfaceOBD-II
Display Resolution1280*720
Display Size5" touch HD screen
RAM2 GB
Memory (Storage)32 GB
Battery6100mAh (Lithium Polymer)
OBD II Interface Input Voltage9V~18V
Operating SystemAndroid
Software UpdateYes (Lifetime Free Update)
LanguageEnglish, French, German, Italian, Japanese, Korean, Polish, Portuguese, Russian, Spanish
Dimensions228 mm x 125 mm x 34 mm
Operating Temperature0°C to 50°C (32°F to 122°F)
Storage Temperature-20°C to 70°C (-4°F to 158°F)
Charging Temperature0°C to 40°C (32°F to 104°F)
CertificationCE

7. Warranty and Support

7.1 Warranty Information

LAUNCH electronic products are warranted against defects in materials and workmanship for one year (12 months) from the date of delivery to the user. This warranty does not cover parts that have been abused, altered, used for unintended purposes, or used inconsistently with instructions. The exclusive remedy for any defective automotive meter is repair or replacement. LAUNCH is not liable for consequential or incidental damages.

Final determination of defects will be made by LAUNCH. No agent, employee, or representative of LAUNCH has the authority to bind LAUNCH to any affirmation, representation, or warranty concerning LAUNCH automotive meters, except as stated herein.

7.2 Customer Service

For questions regarding the operation of the unit, contact your seller or LAUNCH TECH Service Center:

If a user manual PDF is available, it can be referenced for more detailed instructions. The provided PDF link is: User Manual (PDF).

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.