EOENKK Wireless Brake Light Reversing Camera & Monitor Kit

Contents

Wireless Brake Light Reversing Camera & Monitor Kit User Manual

Model: Wireless Brake Light Reversing Camera & Monitor Kit | Brand: EOENKK

1. Introduction

Thank you for purchasing the EOENKK Wireless Brake Light Reversing Camera & Monitor Kit. This system is designed to provide a clear and stable rear view for safer reversing and driving. It is specifically compatible with various van models, offering easy installation and reliable performance.

Applicability

  • Fiat Ducato (2006-present) - fixed bolt from rear
  • Citroen Cross Country/Relay (2006-present) - with rear bolt
  • Peugeot Boxer (2006-present) - with rear retaining bolt
  • Vauxhall Movano (2022-present) - fixed bolt from rear

Note: Please verify the bracket size compatibility with your vehicle model before installation.

2. Product Overview

This wireless reversing camera kit features a 5-inch HD monitor and a 1080P brake light camera, utilizing 2.4GHz digital wireless technology for stable signal transmission. The camera is IP68 waterproof and provides a 120-degree viewing angle with guiding lines for enhanced safety.

Wireless Brake Light Reversing Camera and Monitor Kit components.
Figure 2.1: Main components of the Wireless Brake Light Reversing Camera and Monitor Kit.
Diagram showing stable 2.4G WiFi signal and immunity to radar, Bluetooth, WiFi, and thunderstorm interference.
Figure 2.2: Stable 2.4GHz digital wireless signal with anti-interference capabilities.

3. Package Contents

Please check the package for the following items:

  • 1 x 5-inch Wireless Display
  • 1 x HD 1080P Wireless Brake Light Camera
  • 1 x Sucker Bracket (for monitor)
  • 1 x Cigarette Lighter Car Charger
  • 2 x Power Cords
  • 1 x Antenna
  • 1 x Accessories (for camera, e.g., mounting hardware)
  • 1 x User Manual (this document)
Image showing the package contents: Camera, Monitor, Power Cord x2, Bracket, Manuals, Cigarette lighter Car Charge.
Figure 3.1: Package Listing of the Wireless Camera Kit.

4. Specifications

Monitor Specifications:

Display Size5 inch TFT LCD
Wireless ReceiverBuilt-in 2.4G digital wireless receiver module
Operating Frequency2400-2483.5MHz
VoltageDC12-24V
Video FormatNTSC/PAL
Resolution800 × 480 IPS
Operating Temperature-20°C ~ +70°C

Camera Specifications:

Sensor1/3 Super CMOS sensor
Wireless TransmitterBuilt-in 2.4G digital wireless transmitter module
Resolution1920 x 1080P (AHD)
Viewing Angle120°
Illuminance0 Lux (built-in infrared)
Waterproof RatingIP68
Shockproof10G
VoltageDC12-24V

General Specifications:

Lens MaterialPlastic + Glass
Shell MaterialPlastic
ConnectivityWireless
Guiding LineYes
Alarm TypeVehicle Backup Cameras
CertificationCE, RoHS
Close-up of brake light camera, monitor dimensions (136.8mm x 87mm), and 360-degree adjustable suction cup mount.
Figure 4.1: Monitor dimensions and adjustable suction cup mount.

5. Installation Instructions

The wireless back-up camera system is designed for simple installation. Follow these steps for proper setup:

5.1 Monitor Installation

  1. Attach the suction cup bracket to the desired location on your dashboard or windshield, ensuring a clear view and secure mounting. The bracket allows for a 360-degree adjustable angle for optimal positioning.
  2. Connect the 5-inch display to the cigarette lighter's power supply using the provided cigarette charger. Alternatively, you can connect it directly to the vehicle's ignition power source (ACC/Power wire) and ground wire (Black).

5.2 Camera Installation

  1. Remove the original brake light assembly from your vehicle.
  2. Install the new wireless brake light camera assembly in place of the original brake light. Ensure it is securely fastened.
  3. Connect the camera's power wires:
    • Connect the camera's positive power lead to the vehicle's Rear Light Positive.
    • Connect the camera's negative power lead to the vehicle's Rear Light Negative.
    • For brake light activation, connect the brake light lead directly to the original brake light feed.
  4. Attach the antenna to the camera unit for optimal wireless signal transmission.

5.3 Pairing and Testing

Once both the monitor and camera are powered, the system should automatically pair. Test the system by engaging reverse gear to ensure the camera feed appears on the monitor. Adjust the camera angle if necessary to achieve the desired view.

Wiring diagram for the wireless reversing camera system, showing connections for the monitor (cigarette lighter, ACC/Power, Ground) and camera (Rear Light Positive/Negative, Brake Light).
Figure 5.1: Easy Installation Wiring Diagram.

6. Operation

The monitor features several buttons for controlling its functions:

  • Power: Turns the monitor on/off.
  • Menu (M): Accesses the monitor's settings menu.
  • Up: Navigates up through menu options or increases values.
  • OK: Confirms selections or enters sub-menus.
  • Down: Navigates down through menu options or decreases values.

When the vehicle is in reverse, the camera feed will automatically display on the monitor, often with guiding lines to assist with parking maneuvers. These guiding lines help estimate distance and trajectory.

In-car view of the 5-inch wireless monitor displaying a van's rear view, highlighting AHD 1080P resolution and 120-degree camera angle.
Figure 6.1: Monitor displaying rear view with guiding lines.

7. Maintenance

This camera system is designed for durability and minimal maintenance. The camera is rated IP68 waterproof, protecting it from dust and water ingress.

  • Cleaning: Periodically clean the camera lens and monitor screen with a soft, damp cloth to ensure clear visibility. Avoid abrasive cleaners.
  • Connections: Ensure all power connections remain secure to prevent intermittent operation.
  • Environment: Avoid using the product in extremely high-temperature or humid environments to prolong its lifespan.

8. Troubleshooting

If you encounter issues with your wireless camera system, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
No image on monitor
  • Monitor not powered on.
  • Camera not receiving power.
  • Poor wireless connection.
  • Incorrect wiring.
  • Press the Power button on the monitor.
  • Check camera power connections (Rear Light Positive/Negative, Brake Light feed).
  • Ensure antenna is securely attached to the camera.
  • Verify all wiring connections as per the installation diagram.
Flickering or unstable image
  • Weak wireless signal.
  • Interference from other devices.
  • Ensure the antenna is properly positioned and not obstructed.
  • The system uses 2.4GHz frequency hopping for anti-interference, but extreme conditions might affect it. Try repositioning the monitor or camera slightly.
Guiding lines not appearing
  • Feature might be disabled in monitor settings.
  • Access the monitor's menu (M button) and check for guiding line settings.

If the problem persists, please contact customer support.

9. User Tips

  • Easy Installation: Many users find this wireless kit straightforward to install, making it a convenient upgrade for your vehicle.
  • Stable Signal: The 2.4GHz digital wireless signal is praised for its stability and lack of interference, providing a reliable view.
  • Adjustable View: Utilize the 360-degree adjustable suction cup mount for the monitor to find the perfect viewing angle that suits your driving position.

10. Warranty and Support

Warranty Information:

This product comes with a one-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

Customer Support:

For further assistance, technical support, or warranty inquiries, please refer to the official user manual PDF or contact the seller directly.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

11. Safety Warnings

  • Do not use the product in high-temperature or excessively humid environments.
  • Ensure all parts are securely installed before use to prevent detachment during vehicle operation.
  • Keep out of reach of children.
  • Do not touch the internal surface of the camera lens or monitor screen with bare hands to avoid damage or smudges.
  • After installation, verify that no components are missing or improperly installed.
  • Do not use damaged or defective parts.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.