MEKEDE MN-X 10.25inch Car Radio Stereo for Audi Q3

Contents

MEKEDE 10.25inch CarPlay Android 14 Car Radio Stereo User Manual

Model: MN-X Series for Audi Q3 (2012-2019)

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MEKEDE 10.25inch CarPlay Android 14 Car Radio Stereo. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

MEKEDE 10.25inch CarPlay Android 14 Car Radio Stereo for Audi Q3
MEKEDE 10.25inch CarPlay Android 14 Car Radio Stereo

2. Package Contents

Ensure all items listed below are present in your package:

Package Contents: Machine, Packaging Box, Power Cable, GPS Antenna, 4G Antenna, MIC
MN-X Series Package Contents
  • Main Unit (10.25inch Car Multimedia Player)
  • Packaging Box
  • Power Cable
  • GPS Antenna
  • 4G Antenna
  • Microphone (MIC)

3. Vehicle Compatibility

This car radio stereo is designed for Audi Q3 models. Please verify your vehicle's year and original system version before installation.

Audi Q3 2013-2018 Lower Version (RMC) and 2013-2019 High Version (HN+R) compatibility
Compatibility for Audi Q3 models
  • For Audi Q3 2013-2018: Compatible with Lower Version (RMC system).
  • For Audi Q3 2013-2019: Compatible with High Version (HN+R system).

4. Setup and Installation

Installation should ideally be performed by a qualified professional. Ensure the vehicle's power is disconnected before starting installation.

4.1 Pre-Installation Check

Before and After installation comparison of the car radio stereo in an Audi Q3 dashboard
Visual comparison: Before and After installation

4.2 Wiring Instructions

The unit is designed for plug-and-play installation. Connect the provided power cable, GPS antenna, and 4G antenna to their respective ports on the main unit and route them appropriately within the vehicle.

4.2.1 Audio Output Connection (AUX/AMI)

Attention: Android sound is transmitted through AUX or AMI.

Wiring diagram for AUX IN and AMI audio connections
Audio Output Connection Diagram
  • If your car has an "AUX IN" hole: Use the "Audio out" cable on top of the Android ISO power cable to plug into the AUX IN hole and get sound.
  • If there is an "AMI" port in your car: You must use the "Audio Out" wire on the top of the Android ISO power cord to plug into the AMI cable and then into the car's AMI port to get sound.

Please Note:

If there is no AUX or AMI on your car, you will need to add an FM transmitter to produce audio. However, the sound quality will not be as good as AUX or AMI. Please acknowledge this issue before placing the order.

4.2.2 Rear View Camera Wiring

Wiring diagram for an added camera, showing reverse line detection and ground wire connections
Added Camera Wiring Diagram

Connect the camera's reverse line detection wire to the reversing detection lamp and the ground wire to a suitable ground point. If using an original camera, set the camera type to "Original back car" in the settings.

4.3 Initial Power-On and Resolution Setting

After installation, power on the unit. If the OEM menu shows symptoms like a black screen, lines, or flashing, you may need to adjust the resolution.

Troubleshooting OEM menu display issues and steps to set resolution
Troubleshooting OEM Menu Display and Resolution Setting

How To Set The Resolution:

  1. Go to Settings.
  2. Select Personalized Setting.
  3. Choose Resolution ratio.

If your original system doesn't show up or is flashing, please input "Setting" - "Personalized Setting" - "Resolution ratio". The display screen of the original car should correspond to the option, otherwise the display may be poor.

5. Operating Instructions

Your MEKEDE car radio stereo runs on Android 14 and offers a wide range of features.

5.1 System Overview

MN-X Series Android 14 Smart System interface
Android 14 Smart System Interface

The unit features a newly upgraded Android system with added features and optimized performance.

5.2 Dual System Functionality

The unit retains the original vehicle system and integrates the Android system. You can freely switch between both systems.

Original car functions like steering wheel control, iDrive, and CD player are retained
Retained Original Car Functions

The following original car functions will continue to work properly:

  • Steering wheel control
  • iDrive control
  • Original CD player
  • Original car system
  • Original / additional rear view camera
  • Original i-Drive control

5.3 User Interface (UI)

The device comes with two kinds of UI that can be changed according to your preferences.

Built-in two kinds of UI, showing a switch option
Switching between UI styles

The latest main menu is designed to make driving easier and the car experience cooler.

5.4 Connectivity

5.4.1 Bluetooth (BT)

The built-in smart BT system supports mobile phone BT pairing, hands-free dialing, steering wheel button control, and synchronous call recording to ensure driving safety.

Built-in Bluetooth features: BT music, sync contacts, synchronous call record
Bluetooth Features

5.4.2 4G LTE & WiFi

The built-in 4G module allows you to stay connected to fast cellular data networks practically anywhere you go, eliminating the need to turn on your phone's hotspot every time.

Built-in 4G LTE and WiFi with SIM card slot
4G LTE and WiFi Connectivity

5.5 Smart Features

5.5.1 Wireless Car-Play + Android Auto

The unit comes with built-in Car-Play and Android Auto functions, eliminating the need to purchase additional accessories.

Wireless Car-Play (iOS) and Wireless Auto (Android) connection steps
Car-Play and Android Auto Connection

Wireless Car-Play (iOS system):

  1. Connect BT.
  2. Click on "ZLINK5" and wait for connection. (Car-Play can also be connected via USB Cable).

Wireless Auto (Android system):

  1. Connect BT.
  2. Click on "ZLINK5" and wait for connection. (Note: 2+32GB requires a USB cable connection).

5.5.2 GPS Navigation

Built-in global positioning system with omni-directional map display, synchronous display of real-time traffic conditions, and rapid and accurate positioning. Supported maps include Navitel, iGO, Yandex, and Google.

GPS Navigation, Split Screen, and Mirror Link-K features
Navigation, Split Screen, and Mirror Link

5.5.3 Split Screen

Support for two applications to be displayed on the screen at the same time, making operation more convenient and faster. Press the dedicated button to select any two software for split screen display.

Only 8-core products support this feature. It supports wired and wireless connections for iPhone (iOS) and Android phones.

5.5.5 Digital Sound Processor (DSP)

Increase DSP digital audio processing module multi-dimensional surround lossless sound effects, and enjoy a high-definition audio-visual feast. The unit supports 32 equalizer adjustments, giving you more power to control the sound of various frequencies.

DSP with 32 EQ Adjustments, showing equalizer interface
DSP 32 EQ Adjustments

5.5.6 Car Information Display

The speed, fuel level, oil pressure, and safety warnings can be displayed on the dashboard.

Car information display with blue, red, and green interfaces showing speed, engine speed, fuel, temperature, parking brake, seat belt, and door status
Car Information Service Condition Display

5.5.7 AHD Reversing Video

The picture quality of AHD rear-view video is clearer than that of ordinary cameras, providing better visibility when reversing. (Rear view camera is not included).

AHD Reversing Video display showing clear rear-view with parking guidelines
AHD Reversing Video

5.5.8 ADAS DVR (Optional)

The ADAS DVR anti-collision warning driving recorder provides front vehicle distance prediction, front vehicle anti-collision warning, and lane departure warning to make driving safer. (DVR is not included, optional accessory).

ADAS DVR features: front car start reminder, lane deviation warning, front distance collision warning
ADAS DVR Anti-collision Warning

5.5.9 Support TPMS (Optional)

After correctly installing the TPMS in your car, the sensors will automatically monitor tire pressure and temperature, and transmit real-time statistics to the receiver. (TPMS is not included, optional accessory).

Support for External and Built-in TPMS systems, showing tire pressure monitoring display
Support TPMS (Tire Pressure Monitoring System)

5.5.10 Support OBD II (Optional)

With the OBDII function, you can monitor real-time data and obtain fault codes from your vehicle computer anytime. (OBDII is not included, optional accessory).

Support OBD II, showing Torque app interface and OBDII dongle
Support OBD II Diagnostics

5.6 Video Demonstration

Watch this video for a demonstration of the unit's features, including Bluetooth, music playback, DSP settings, dashboard display, video playback, Wi-Fi connection, split screen, CarPlay, Android Auto, and language settings.

Product Feature Demonstration Video

6. Maintenance

To ensure the longevity and optimal performance of your car radio stereo, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
  • Temperature: Do not expose the unit to extreme temperatures or direct sunlight for prolonged periods.
  • Moisture: Keep the unit dry. Moisture can damage internal components.
  • Software Updates: Periodically check for and install software updates to ensure the system runs smoothly and securely.

7. Troubleshooting

If you encounter issues with your device, refer to the following common problems and solutions:

7.1 Display Issues (OEM Menu)

If the OEM menu shows symptoms like a black screen, lines, or flashing:

Troubleshooting OEM menu display issues and steps to set resolution
Troubleshooting OEM Menu Display and Resolution Setting
  1. Check LVDS Connector: Ensure the LVDS connector is securely attached.
  2. Set Original Menu Resolution: Navigate to Settings > Personalized Setting > Resolution ratio and select the correct resolution for your original car display.

7.2 No Audio Output

  • Verify that the AUX IN or AMI cable is correctly connected as described in section 4.2.1.
  • Check the volume settings on both the car stereo and your connected device.
  • If using an FM transmitter, ensure it is properly configured and tuned to an unused frequency.

7.3 Connectivity Problems (Bluetooth/WiFi/4G)

  • Bluetooth: Ensure Bluetooth is enabled on both the stereo and your mobile device. Try re-pairing the devices.
  • WiFi: Check if the WiFi network is active and you have entered the correct password.
  • 4G: Ensure a valid 4G SIM card is inserted (if applicable) and has an active data plan. Check network signal strength.

7.4 Car-Play/Android Auto Not Connecting

  • Ensure your phone's Bluetooth is on and connected to the unit.
  • Open the "ZLINK5" application on the stereo.
  • For wired connections (especially for 2+32GB models), ensure the USB cable is securely connected and functional.

8. Specifications

Below are the general specifications for the MEKEDE 10.25inch CarPlay Android 14 Car Radio Stereo. Specific configurations may vary by model variant (e.g., RAM/ROM).

MN-X Series Parameters table showing Model, System, CPU, RAM/ROM, Core, FinFET, Internet, DSP, Split Screen, Car-play, Android Auto for different configurations
MN-X Series Detailed Parameters
AttributeValue
Brand NameMEKEDE
Operating SystemAndroid 14
RAM4G / 6G / 8G / 12G (depending on model)
ROM64G / 128G / 256G / 512G (depending on model)
Processor Speed8 Core (1.3GHz, 1.8GHz, 2.0GHz, 2.5GHz depending on model)
Display Size10.25 Inch
Resolution1280*480 (some models may support 1920*720)
Out Power4*45W
Voltage12 V
Interfaceplug-and-play
Built-in ScreenYes
Is touch screenYes
Wireless CarplaySupport
Wireless AutoSupport
BTSupport
DSPSupport (except 2+64GB model)
Split ScreenSupport (except 2+64GB model)
Digital Media FormatDVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD LanguageMulti-language support including English, Chinese, Arabic, German, French, Japanese, Spanish, Italian, etc.
CertificationCE, FCC, RoHS, WEEE
MaterialMetal+plastic+glass
Item Size10.25 Inch
DinDouble Din
TF/Micro SD Slot1
Built-in DVD PlayerNo
Built-in CD playerNo
Preset StationNo

9. User Tips

  • For optimal audio quality, ensure your car's AUX or AMI input is properly configured and selected as the audio source.
  • If experiencing slow performance, try closing unused applications running in the background.
  • Regularly clear the cache of navigation apps to maintain smooth operation.
  • When using split-screen mode, prioritize essential applications to avoid system slowdowns.
  • For the best experience with CarPlay/Android Auto, ensure your phone's operating system is up to date.

10. Warranty and Support

The MEKEDE 10.25inch CarPlay Android 14 Car Radio Stereo comes with a 3-year warranty. For any technical assistance, troubleshooting beyond this manual, or warranty claims, please contact MEKEDE customer support directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.