Introduction
Thank you for choosing the ATTACK SHARK X68 PRO HE Wireless Rapid Trigger Gaming Keyboard. This high-performance keyboard is designed for esports-grade gaming, featuring advanced Hall Effect magnetic switches, adjustable actuation, and versatile connectivity options. This manual will guide you through the setup, operation, and maintenance of your new keyboard to ensure optimal performance and longevity.
Key Features
- 8000Hz Polling Rate & Adjustable Actuation: Experience lightning-fast response with an 8000Hz polling rate (wired mode) and ultra-low 0.125ms latency. Precisely adjust actuation from 0.1mm to 3.4mm with 0.01mm sensitivity.
- Hall Effect Magnetic Switches: Self-developed linear magnetic switches support hot-swapping for customization and ultra-fast response.
- Compact 60% Layout: Maximizes desk space and enhances mobility for intense gameplay.
- Premium Aluminum Build: Features an aircraft-grade anodized aluminum frame for exceptional durability and stability.
- Rapid Trigger & Dual-Action Key Function: Rapid Trigger ensures instant key resets without full release, while Dual-Action Key Function allows a single key to perform two actions based on pressure.
- Stunning RGB Backlighting: Equipped with 16.8 million customizable RGB lighting modes for an immersive gaming experience.
- Optimized Acoustics: Dual-layer PORON dampening foam reduces keystroke noise and enhances HIFI acoustics.
- Tri-Mode Connectivity: Supports 2.4GHz wireless, Bluetooth 5.2, and USB-C wired connections.
- Web Driver: Fully programmable via the QMK.TOP web driver for key remapping, macros, actuation points, and RGB effects, without software installation.
- Ergonomic Design: Includes a detachable soft-edged wrist rest for comfort during long gaming sessions.
Package Contents
The ATTACK SHARK X68 PRO HE keyboard package typically includes:
- ATTACK SHARK X68 PRO HE Gaming Keyboard
- 1.5m Type-C to USB-A Cable (with magnetic shielding)
- Detachable Soft-Edged Wrist Rest
- Customizable Detachable Banner
- User Manual (this document)
Setup Guide
1. Connectivity Options
The X68 PRO HE keyboard offers three modes of connection:
- USB-C Wired Connection:
- Connect the provided USB-C cable to the keyboard's port.
- Connect the other end of the cable to an available USB-A port on your computer.
- The keyboard will be automatically recognized and ready for use. This mode enables the 8000Hz polling rate.
- 2.4GHz Wireless Connection:
- Locate the 2.4GHz USB dongle (usually stored in a compartment on the keyboard).
- Plug the USB dongle into an available USB-A port on your computer.
- Switch the keyboard's mode selector (if present) to 2.4GHz wireless mode. The keyboard should connect automatically.
- Bluetooth 5.2 Connection:
- Switch the keyboard's mode selector to Bluetooth mode.
- On your computer or device, open Bluetooth settings and search for new devices.
- Select "ATTACK SHARK X68 PRO HE" from the list of available devices to pair.
2. Wrist Rest Attachment
For enhanced comfort during extended use, attach the soft-edged wrist rest to the front edge of the keyboard.
Operating Instructions
1. Basic Keyboard Functions
The X68 PRO HE is a 61-key layout keyboard. Many functions are accessed via the 'Fn' key in combination with other keys.
2. RGB Backlighting Control
The keyboard features 16.8 million full RGB color backlighting. Use the following Fn key combinations to control the lighting effects:
Image: White keyboard with RGB backlighting and Fn key combinations for lighting control.
- Fn + ↑ (Up Arrow): Increase Backlight Brightness
- Fn + ↓ (Down Arrow): Decrease Backlight Brightness
- Fn + → (Right Arrow): Increase Backlight Speed
- Fn + ← (Left Arrow): Decrease Backlight Speed
- Fn + |\: Switch Lighting Effects
- Fn + Enter: Switch Lighting Color
3. Advanced Customization with Web Driver
The X68 PRO HE is fully programmable via its innovative QMK.TOP web driver. No software installation is required; the browser can be used immediately after opening the driver page.
Image: Web driver interface for customization.
- Remap Keys: Reassign any key for greater efficiency.
- Macro Editing: Customize and record complex key sequences.
- RGB Design: Personalize your own light mode and speed.
- Actuation Point Adjustment: Fine-tune the actuation points of the Hall Effect switches.
Refer to the specific web driver interface for detailed instructions on using these features.
4. Rapid Trigger and Dual-Action Key Function
These features are managed through the web driver. Configure them to suit your gaming style:
- Rapid Trigger: Eliminates debounce delay, allowing keys to reset instantly without needing to be fully released. Ideal for fast-paced games.
- Dual-Action Key Function: Assign two different actions to a single key based on the pressure applied.
Maintenance
1. Cleaning
- Use a soft, lint-free cloth to wipe down the keyboard surface.
- For dust and debris between keycaps, use compressed air.
- If necessary, gently remove keycaps (using a keycap puller, not included) to clean underneath.
- Avoid using harsh chemicals or abrasive materials that could damage the finish or keycap legends.
2. Storage
When not in use, store the keyboard in a dry, cool place away from direct sunlight and extreme temperatures.
Troubleshooting
- Keyboard not responding:
- Check the USB-C cable connection or ensure the wireless dongle is properly inserted.
- Verify the keyboard's mode switch is set to the correct connection type (wired, 2.4GHz, or Bluetooth).
- Ensure the keyboard is charged if using wireless modes.
- Try connecting to a different USB port or device.
- RGB lighting not working or incorrect:
- Ensure the keyboard is powered on.
- Use the Fn key combinations (Fn + |\, Fn + Enter) to cycle through effects and colors.
- Check the web driver settings for any custom profiles that might be overriding default settings.
- Keys not registering or double-typing:
- Clean around and under the affected keycaps.
- If using Hall Effect switches, check the actuation settings in the web driver.
- Ensure the switches are properly seated if they are hot-swappable.
- Wireless connection issues:
- For 2.4GHz, ensure the dongle is close to the keyboard and there are no strong interferences.
- For Bluetooth, try re-pairing the keyboard with your device.
- Ensure the keyboard's battery is sufficiently charged.
Specifications
Image: Keyboard illustrating the 8000Hz polling rate.
| Feature | Detail |
|---|---|
| Brand Name | ATTACK SHARK |
| Model | X68 PRO HE |
| Type | Tri-Mode (Wired USB-C, 2.4GHz Wireless, Bluetooth 5.2) |
| Operation Style | Mechanical (Hall Effect Magnetic Switches) |
| Interface Type | USB (for wired connection) |
| Keyboard Standard | 61 Keys |
| Full Size Keyboard | No |
| Wrist Support | Yes (Detachable) |
| Switches Hot Swap | Yes |
| Language | English |
| Polling Rate | 8000Hz (Wired Mode) |
| Latency | Ultra-Low 0.125ms |
| Scan Rate | 128K |
| Actuation Adjustment | 0.1mm to 3.4mm (0.01mm sensitivity) |
| Switch Total Travel | 3.8±0.3mm |
| Switch Operation Force | 40±5gf |
| Switch Lifespan | 100 Million keystrokes |
| Package Dimensions (L x W x H) | 36cm x 15cm x 4cm |
| Package Weight | 1.08 kg |
User Tips
While specific user reviews or Q&A were not provided, here are some general tips to enhance your experience:
- Experiment with Actuation: Take time to find your preferred actuation point using the web driver, especially for different game genres. A shorter actuation is often preferred for competitive FPS games.
- Customize RGB: Explore the 16.8 million color options and various effects to match your setup or mood.
- Utilize Macros: For productivity or complex in-game actions, set up macros via the web driver to streamline your workflow.
- Keep Firmware Updated: Periodically check the official ATTACK SHARK website or web driver for any firmware updates to ensure optimal performance and new features.
Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official ATTACK SHARK website or contact their customer service directly. Keep your proof of purchase for warranty claims.
