1. Introduction
The XTOOL AnyToyo SK1 is a specialized device designed for programming smart keys for Toyota and Lexus vehicles that utilize 8A/4A keys. When used in conjunction with XTOOL key programming devices like KC100 or KC501 and an XTOOL tablet, the SK1 allows for the generation of emulated Toyota 4A/8A smart keys without the need for pincodes, benchwork, or direct OBD connections. This functionality is crucial for emergency ignition or for adding new keys when all original keys are lost.
The AnyToyo SK1 also supports programmable keys specifically designed for the latest Toyota/Lexus models, featuring OEM-level key chips for high compatibility within the aftermarket.
Key Features:
- Bench-free, Pincode-free, OBD-free: Simplifies the key programming process.
- Secure Original Data: Protects data within a smart box.
- Open-source Smart Key: Can be used with other programmers.
- OEM-Level Key Chip: Ensures excellent compatibility.
Functions:
- Add key
- All keys lost
- Emergency start
- Frequency & key type reading
2. Setup
The XTOOL AnyToyo SK1 device consists of the following components:
- Antenna: Used for collecting data and emulating key data.
- Light: A green indicator light that turns on when connected. It flickers during data collection and turns off once collection is complete.
- USB 3.0 Port: Connects the SK1 to XTOOL devices. If your XTOOL tablet has Type-C ports, use a USB 3.0 to Type-C adapter.
Ensure your XTOOL tablet and key programmer (KC100 or KC501) are updated to the latest software version for optimal performance and compatibility.
3. Operating Instructions
3.1. Collecting Data from Start/Stop Button
- Connect the AnyToyo SK1 emulator to your XTOOL tablet.
- Initiate the data collection process on the tablet.
- When prompted by the tablet, position the SK1's antenna close to the vehicle's start/stop button.
- Observe the green indicator light on the SK1: it will flicker during data collection and turn off once the process is complete.
3.2. Collecting Data / Emergency Start from Low-Frequency Antenna
The low-frequency antenna in vehicles is typically located in one of the following areas:
- At the front, beneath the armrest storage area.
- In the middle, under the backseats.
- Near the door handle (for models equipped with keyless entry).
- Connect the AnyToyo SK1 emulator to your XTOOL tablet.
- Initiate the data collection process on the tablet.
- When prompted, place the SK1's antenna close to the vehicle's low-frequency antenna location.
- The green light on the SK1 will flicker during collection and turn off when finished.
- For an emergency start after data collection, place the emulator close to the vehicle's antenna and press the start button.
3.3. Supported Models
The following table lists the supported Toyota and Lexus models. Note that chip information may vary by market or model and is for reference only.
| Model | Model Year | FCC ID | Chip Type |
|---|---|---|---|
| TOYOTA | |||
| 4Runner | 2020-2021,... | HYQ14FBA,... | 8A-82, ... |
| Alphard/Vellfire | 2015+ | BK1EW | 8A-85 |
| Aqua/Prius C | 2012-2020 | HYQ14FBA | 8A-82 |
| Avalon | 2019-2022 2019-2022 | HYQ14FBC HYQ14FBE(315)/HYQ14FCC(433) | 8A-85 8A-88 |
| Camry | 2018+ | HYQ14FBC(315)/BR2EX(433) | 8A-85 |
| HYQ14FLA | 8A-BA | ||
| C-HR/Izoa | 2017-2020 2018-2021 | BR2EX MOZBR1ET | 8A-88 8A-85 |
| Corolla (Altis) | 2019+ | HYQ14FBN(315)/B2U2K2R(433) | 4A |
| Corolla Cross | 2022+ | HYQ14FBW | 4A |
| Fortuner | 2016-2019 2020-2021 | BM1EW HYQ14FBA | 8A-82 8A-82 |
| Harrier/Venza | 2021+ | HYQ14FBX | 8A-BA |
| Highlander | 2018-2020 | HYQ14FBA | 8A-82 |
| Crown Kluger | 2020+ | HYQ14FBC(315)/HYQ14FCN(433) | 8A-88 |
| Innova | 2021+ | B3H2K2R | 4A |
| Land Cruiser | 2016-2019..... | HYQ14FBA, BH1EK/BH1EW, BJ2EK/BJ2EW,... | 8A-82,... |
| Land Cruiser Prado | 2018-2019 2020-2023 | HYQ14FAK(312)/HYQ14FCF(433) HYQ14FCC | 8A-82 8A-85 |
| Mirai | 2016-2020 | HYQ14FBA | 8A-82 |
| 2021-2022 | HYQ14FLA | 8A-BA | |
| Prius (Prime) | 2016-2021, | HYQ14FBC,... | 8A-85,... |
| RAV4 (Prime) Wildlander | 2013-2018,... | HYQ14FBA,.. | 8A-82,... |
| Sequoia | 2019-2021 2021-2023 | HYQ14FBA HYQ14FBB | 8A-82 8A-85 |
| Sienna | 2021-2022 | HYQ14FBX | 8A-BA |
| Tacoma | 2015-2021 | HYQ14FBA | 8A-82 |
| Tundra | 2021-2023,... | HYQ14FBB,.. | 8A-85,... |
| Yaris (Cross) | 2020+ | B3H2K2R | 4A |
| LEXUS | |||
| ES | 2019-2023 | HYQ14FBF/HYQ14FBZ | 8A-88 |
| GX | 2020+ | HYQ14FBF | 8A-85, 8A-88 |
| LC | 2018-2020 2020-2021 | HYQ14FBF HYQ14FBZ | 8A-85 8A-88 |
| IS | 2014-2019 | HYQ14FBA(315)/BG1EK(433) | 8A-82 |
| 2021+ | HYQ14FLB | 8A-85 | |
| LS | 2018-2022 | HYQ14FBF | 8A-88 |
| LX | 2016-2019, | HYQ14FBA(315), BG1EW/BG1EK(433),... | 8A-82.... |
| NX | 2015-2020 2021+ | HYQ14FBA/HYQ14FDD-04(315), BG1EW/BG1EK(433) HYQ14FLB | 8A-82 8A-85 |
| RC | 2014-2020 | HYQ14FBA(315)/BG1EK(433) | 8A-82 |
| RX | 2016-2020, ... | HYQ14FBB(315), BP1EK/BP1EW(433),... | 8A-85,... |
| UX | 2019-2022 | HYQ14FBF/HYQ14FBZ | 8A-88 |
4. Maintenance
To ensure the longevity and optimal performance of your XTOOL AnyToyo SK1, follow these general maintenance guidelines:
- Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Store the device in a safe place when not in use to prevent physical damage.
- Do not attempt to disassemble or repair the device yourself, as this will void the warranty and may cause further damage.
- Ensure the USB cable is not bent sharply or subjected to excessive strain, which could damage the connectors.
5. Troubleshooting
If you encounter issues with your XTOOL AnyToyo SK1, consider the following basic troubleshooting steps:
- Device not recognized: Ensure the USB cable is securely connected to both the SK1 and the XTOOL tablet. Try a different USB port or cable if available.
- Green light not illuminating: Verify the device is properly connected to the XTOOL tablet and the tablet is powered on.
- Data collection failure: Ensure the SK1's antenna is positioned correctly and close enough to the vehicle's start/stop button or low-frequency antenna. Check for any obstructions.
- Software issues: Ensure your XTOOL tablet's software and the key programming application are up to date. Restart the tablet and the application.
- Emulated data not working: Confirm that the emulated data has not been erased by disconnecting the SK1 from the XTOOL device prematurely.
For persistent issues, refer to the official XTOOL support resources or contact customer service.
6. Specifications
| Attribute | Specification |
|---|---|
| Brand Name | XTOOL |
| Model | AnyToyo SK1 |
| Item Weight | 0.3kg |
| Package Weight | 0.281kg |
| Package Dimensions (L x W x H) | 23cm x 13cm x 4cm |
| Electronic | No |
| Is Batteries Included | Yes |
| Software Update | No |
| Software Version | Newest |
| Hardware Version | Newest |
| External Testing Certification | CE |
| Certification | CE |
| Origin | Mainland China |
| Use | Not Telecommunication |
| High-concerned chemical | none |
7. User Tips
To maximize your experience with the XTOOL AnyToyo SK1, consider the following tips:
- Always ensure your XTOOL tablet and associated key programming software are up-to-date to support the latest vehicle models and features.
- When collecting data, try different positions for the SK1's antenna around the start/stop button or low-frequency antenna to find the optimal signal.
- Keep the device and its connections clean to prevent interference during operation.
- Familiarize yourself with the specific key programming procedures for each vehicle model, as steps may vary slightly.
- The emulated data is temporary; ensure you complete the key programming process before disconnecting the SK1 from your XTOOL device.
8. Warranty and Support
The XTOOL AnyToyo SK1 is manufactured by Shenzhen Xtooltech Intelligent Co., LTD. For technical support, warranty inquiries, or further assistance, please use the contact information below:
- Manufacturer: Shenzhen Xtooltech Intelligent Co., LTD.
- Company Address: 17&18/F, A2 Building, Creative City, Liuxian Avenue, Nanshan District, Shenzhen, China
- Service Hotline: 0086-755-21670995 / 86267858
- Email: marketing@xtooltech.com
- Fax: 0755-83461644
- Website: www.xtooltech.com
An official user manual in PDF format is also available for detailed instructions and specifications. You can access it via the following link: XTOOL AnyToyo SK1 User Manual (PDF).