XEBEC HR-1004M, HD-1004M, HO-1004M, HB-04M, HV-1004M Series

Contents

XEBEC High-Temperature Resistant Grinding Stones User Manual

Models: HR-1004M, HD-1004M, HO-1004M, HB-04M, HV-1004M Series

1. Introduction

This manual provides essential information for the safe and effective use of XEBEC High-Temperature Resistant Grinding Stones. These grinding stones are designed for precision polishing and deburring of various materials, including hardened steels, carbides, and non-ferrous metals. Please read this manual thoroughly before use to ensure optimal performance and safety.

2. Safety Information

Always follow general workshop safety practices when using grinding tools. This includes, but is not limited to:

  • Wear appropriate personal protective equipment (PPE), such as safety glasses, gloves, and dust masks.
  • Ensure the workpiece is securely clamped before grinding.
  • Use the grinding stone with compatible tools and at recommended speeds.
  • Avoid excessive pressure, which can damage the stone or workpiece.
  • Keep the work area clean and well-lit.
  • Store grinding stones in a dry, safe place away from children.

3. Product Overview

XEBEC offers a range of high-temperature resistant grinding stones, each tailored for specific applications and materials. These stones are known for their durability and precision.

Various XEBEC grinding stones in different colors and sizes
Figure 1: Assortment of XEBEC High-Temperature Resistant Grinding Stones.

3.1 Types and Applications

Product Type Applicable Workplace Materials Purpose
Xebec ceramic fiber whetstone a series-G series Plastic mold steel (HRC: 40-57), hardened steel with hardness higher than HRC57. Suitable for polishing and deburring of molds. Effective for removing carbon deposits from electric spark processing. Heat resistant up to 300°C, compatible with ultrasonic grinders for extended use.
Xebec ceramic fiber whetstone (for hardened materials) Carbide, quenched steel, and hardened steel with hardness higher than HRC57. Grinds hard materials efficiently. Both front and sides are usable. Enhances grinding efficiency when used with vibration tools.
Xebec ceramic fiber whetstone elastic whetstone Aluminum alloy, copper, wood, and other non-ferrous metals. Flexible contact with workpiece surface to prevent scratches and achieve a smooth, shiny finish.

Note: Some XEBEC grinding stones are designed to withstand high temperatures (up to 300°C) and are suitable for use with ultrasonic grinders.

4. Specifications

The XEBEC grinding stones are available in various models and sizes. Below is a general overview of the model specifications:

Table showing model specifications for XEBEC grinding stones including size, color, and model numbers like HV-1004M, HD-1004M, HO-1004M, HB-04M, HR-1004M, along with surface roughness graphs.
Figure 2: Model Specifications and Surface Roughness Data.

4.1 General Properties

  • Material: Ceramic fiber (grinding medium), Stainless steel (for some components)
  • High-concerned chemical: None
  • Origin: Mainland China

4.2 Model Dimensions (Example)

Size (mm) Purple (HV Series) Brown (HD Series) Orange (HO Series) Blue (HB Series) Red (HR Series)
1x2x100 HV-1004M HD-1004M HO-1004M HB-1004M HR-1004M
1x4x100 HV-1006M HD-1006M HO-1006M HB-1006M HR-1006M
1x6x100 HV-1008M HD-1008M HO-1008M HB-1008M HR-1008M
1x8x100 HV-2004M HD-2004M HO-2004M HB-2004M HR-2004M
2x4x100 HV-2006M HD-2006M HO-2006M HB-2006M HR-2006M
2x10x100 HV-2010M HD-2010M HO-2010M HB-2010M HR-2010M

5. Setup and Preparation

Before using your XEBEC grinding stone, ensure proper setup:

  1. Select the Correct Stone: Choose the appropriate grinding stone type and grit for your material and desired finish (refer to Section 3.1 and 4.2).
  2. Prepare Workpiece: Clean the workpiece and secure it firmly in a vise or clamp to prevent movement during grinding.
  3. Install Stone: Insert the grinding stone into a compatible grinding tool (e.g., ultrasonic grinder, vibration tool). Ensure it is seated correctly and tightened according to the tool's instructions.
  4. Safety Check: Double-check all connections and ensure your PPE is in place.
A XEBEC grinding stone being prepared for use with a grinding tool.
Figure 3: Preparing the grinding stone for operation.

6. Operation

Follow these steps for effective grinding:

  1. Start Tool: Turn on your grinding tool at a low speed initially, gradually increasing to the recommended operating speed for the specific stone and material.
  2. Apply to Workpiece: Gently bring the grinding stone into contact with the workpiece. Avoid applying excessive force.
  3. Grinding Motion: Use a consistent and controlled motion. For polishing, use light, even strokes. For deburring, focus on the edges or areas requiring material removal.
  4. Monitor Progress: Regularly check the workpiece for desired results and adjust your technique as needed.
  5. Cooling (if necessary): For some applications, especially with heat-sensitive materials, consider using a coolant to prevent overheating.
  6. Finish: Once the desired finish is achieved, turn off the tool and carefully remove the grinding stone.
Close-up of a XEBEC grinding stone tip actively grinding a metal surface.
Figure 4: Grinding stone in action on a metal surface.
XEBEC grinding stone being used to refine details on a mold.
Figure 5: Precision grinding on a mold component.

6.1 Product Demonstration Video

This video demonstrates the application and usage of XEBEC grinding stones.

7. Maintenance

Proper maintenance extends the life of your grinding stones:

  • Cleaning: After each use, gently clean the grinding stone to remove any accumulated material. A soft brush or compressed air can be used.
  • Inspection: Regularly inspect the stone for wear, cracks, or damage. Replace worn or damaged stones immediately.
  • Storage: Store grinding stones in their original packaging or a protective case to prevent damage. Keep them in a dry environment.

8. Troubleshooting

Problem Possible Cause Solution
Poor grinding performance / Slow material removal Incorrect stone type for material; Stone is worn; Insufficient tool speed; Excessive pressure. Ensure correct stone selection; Replace worn stone; Adjust tool speed; Reduce grinding pressure.
Scratches on workpiece Too coarse grit; Uneven pressure; Contamination on stone or workpiece. Use finer grit stone; Apply even, light pressure; Clean stone and workpiece thoroughly.
Stone breakage Excessive force; Improper installation; Stone used beyond its temperature limit. Use gentle pressure; Ensure stone is securely installed; Adhere to temperature guidelines (e.g., max 300°C).

9. User Tips

Maximize the effectiveness and lifespan of your XEBEC grinding stones with these tips:

  • For delicate work or fine finishes, always start with a higher grit (finer) stone and test on a scrap piece first.
  • When working with non-ferrous metals like aluminum or wood, the elastic whetstone type is highly recommended to prevent surface damage.
  • Utilize ultrasonic grinders for prolonged use, especially with ceramic fiber whetstones, as they are designed for high-temperature resistance.

10. Warranty and Support

Warranty: New products come with a 6-month warranty. Used products have a 30-day warranty.

Support: For any inquiries or assistance, please contact the seller. Your feedback is valuable for improving service.

Contact Information:

  • Email: 17378260182@163.com
  • WhatsApp: +86 19015815295
  • WhatsApp: +86 17378260182

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.