Important Safety Information
⚠️ Potential Fire Risk: Please strictly follow the instruction manual for charging and storage to prevent potential fire risks.
⚠️ Protective Equipment: While using the product, please wear appropriate protective equipment and fully comply with all applicable laws and regulations.
1. Product Overview
The MAGMOVE ECity Electric Bicycle is designed for urban commuting, offering an effortless, efficient, and eco-friendly exploration experience. It features a powerful Bafang M200 mid-drive motor, a long-lasting lithium battery, and an 8-speed Shimano transmission system.
Key Components
- Bafang M200 Mid-Drive Motor: Provides quiet yet powerful assistance with 250W nominal power and 65Nm of torque, utilizing a torque sensor for smooth acceleration.
- 36V 13Ah (468Wh) Lithium Battery: Integrated into the downtube for a sleek design, removable and lockable for security. Offers a range of 60-100km (up to 120km with assistance mode).
- BAFANG DPC13 LCD Display: Located on the left side of the handlebar, displaying speed, battery level, and riding mode (0-5 PAS levels).
- Shimano 8-Speed Transmission System: Ensures efficient and smooth gear changes for various road conditions.
- Kenda 700C * 38C Tires: Provide excellent stability and grip for city riding and varied terrains.
- Front Coil Suspension: Adjustable to suit riding preferences, suitable for navigating city streets.
- Dual Hydraulic Disc Brakes: For reliable stopping power.
- LED Head & Rear Lights: For visibility and safety in low-light conditions.
- Integrated Rear Rack: Designed to carry cargo up to 15kg.
2. Setup and Assembly
Your MAGMOVE City Electric Bicycle comes largely pre-assembled. Follow these steps for final setup and initial preparation.
2.1 Unpacking and Initial Inspection
- Carefully remove the bicycle from its packaging.
- Inspect for any visible damage during transit. Contact customer service immediately if any damage is found.
- Ensure all components listed in the packing list are present.
2.2 Handlebar and Seat Adjustment
- The handlebar height is adjustable. Loosen the stem bolts, adjust to a comfortable riding position, and securely tighten.
- Adjust the seat height to ensure your feet can comfortably touch the ground when stopped, and your legs have a slight bend at the knee when pedaling. Secure the seat post clamp firmly.
2.3 Battery Installation and Initial Charge
- Locate the side-access hidden battery within the downtube.
- If not already installed, slide the battery into its compartment until it clicks securely into place. Use the provided key to lock the battery.
- Connect the charger to the battery charging port and then to a power outlet. The charger is included with the bike.
- Allow 5-6 hours for a full charge before your first ride. The display will indicate charging status.
2.4 Attaching Accessories
- The bike is equipped with an integrated rear rack. Ensure it is securely fastened if any assembly is required. The maximum load for the rear rack is 15kg.
- Basket fixing points are available on the head tube (3.7cm and 9.3cm measurements) for adding an optional basket (basket not included).
Image: Basket fixing points on the head tube and the integrated rear rack with a sample box.
Image: Close-up of the integrated rear rack, highlighting its utility for carrying cargo.
3. Operating Instructions
3.1 Powering On/Off and Display Usage
- To power on the e-bike, press and hold the power button on the BAFANG DPC13 LCD display. Repeat to power off.
- The display shows current speed, battery level, and the selected pedal assist mode (PAS).
- Use the '+' and '-' buttons on the display to cycle through the 5 pedal assist levels (P-1-2-3-4-5). A higher level provides more motor assistance.
Image: Bafang DPC13 LCD display showing speed, mileage, and battery indicators.
Image: Bafang DPC13 LCD display indicating P-1-2-3-4-5 PAS levels.
3.2 Riding Modes
- Pedal Assist Mode: The motor provides assistance as you pedal. There are 5 levels of assistance. The maximum speed in this mode is 25 km/h.
- Normal Bicycle Mode: You can ride the bike without any motor assistance, just like a traditional bicycle.
3.3 Gear Shifting
The MAGMOVE City Electric Bicycle is equipped with a Shimano 8-speed transmission system.
- Use the shifter on the handlebar to change gears.
- Shift to a lower gear when climbing uphill for easier pedaling.
- Shift to a higher gear when riding downhill or on flat terrain for faster speeds.
- Ensure smooth transitions by easing off the pedals slightly while shifting.
Image: Close-up of the Shimano 8-speed rear derailleur (RD-M310-L ALTUS) and shifter (SL-M315).
3.4 Braking
The bike features dual hydraulic disc brakes for effective stopping.
- Apply both front and rear brakes simultaneously for optimal stopping power and control.
- Avoid sudden, hard braking, especially with the front brake, to prevent skidding.
3.5 Lights
The e-bike is equipped with LED head and rear lights for enhanced visibility.
- The rear light is always on when the bike is powered, which increases visibility but is not connected to the brake lever.
- Note: If a front rack is installed, it may obstruct the front light. Ensure visibility is not compromised, especially when riding at night.
Image: Close-up of the LED head and rear lights.
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your MAGMOVE City Electric Bicycle.
4.1 Battery Care
- Charge the battery fully after each ride, especially if it's been heavily used.
- Avoid completely draining the battery.
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, charge it to about 50-70% every few months.
- The battery has a life cycle of approximately 1000 charges.
- Always use the original charger provided.
4.2 Tires
- Regularly check tire pressure and inflate to the recommended PSI (indicated on the tire sidewall).
- Inspect tires for wear, cuts, or punctures before each ride.
Image: Front wheel detail showing Kenda 700C*38C tires and front oil shock absorption.
4.3 Brakes and Gears
- Check brake levers for proper tension and responsiveness. Adjust if necessary.
- Ensure gear shifting is smooth and precise. Lubricate the chain regularly.
- Inspect brake pads for wear and replace them when needed.
4.4 General Cleaning
- Clean the bike regularly with a damp cloth and mild soap. Avoid high-pressure washing, especially near electrical components.
- Keep electrical connections dry and clean.
5. Troubleshooting
This section addresses common issues you might encounter with your e-bike.
5.1 Motor Not Providing Assistance
- Check Battery: Ensure the battery is charged and properly seated in its compartment.
- Check Display: Make sure the bike is powered on and a pedal assist level (PAS) is selected on the DPC13 display.
- Pedaling: The torque sensor requires you to be pedaling for the motor to engage.
5.2 Display Not Turning On
- Battery Connection: Verify the battery is fully charged and correctly installed.
- Power Button: Ensure you are pressing and holding the power button long enough.
5.3 Gears Slipping or Not Shifting Smoothly
- Chain Lubrication: Lubricate the chain if it appears dry or rusty.
- Derailleur Adjustment: The derailleur might need adjustment. If you are unsure, consult a professional bike mechanic.
5.4 Brakes Squealing or Ineffective
- Brake Pads: Check brake pads for wear. Worn pads need replacement.
- Contamination: Brake rotors or pads might be contaminated with oil or grease. Clean them with a suitable brake cleaner.
- Adjustment: Hydraulic brakes may need bleeding or adjustment. Consult a professional.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | ECity |
| Brand Name | varstrom |
| Certification | CE |
| Rated Passenger Capacity | One Seat |
| Style | Standard Type |
| Max Speed | 25 km/h (<25km/h) |
| Range per Power | 60-100 km (> 60 km) |
| Wattage | 200 - 250W |
| Power Supply/Source | Lithium Battery |
| Voltage | 36V |
| Motor | Brushless, 250W Bafang M200 mid-drive |
| Origin | Mainland China |
| Folded | No |
| Wheel Size | 28” (28 × 2.0 inches) |
| Frame Material | 6061 Aluminum alloy |
| Rating Modes | 2 (Pedal/Electric Assist) |
| Number of Assist Levels | 5 |
| Battery Capacity | 36V 13AH |
| Charging Time | 5-6 hrs |
| Battery Life Cycles | 1000 Cycles |
| Brakes | Dual hydraulic disc brakes |
| Suspension | Front oil shock absorption (Coil suspension) |
| Max Load | 150kg |
| Transmission | Shimano 8S gear system |
| Display | DPC13 LCD |
| Seat and Handlebar | Adjustable |
| Product Weight | 27.0 kg (approximate package weight) |
7. Warranty and Support
7.1 Warranty Information
The MAGMOVE City Electric Bicycle comes with a 2-year warranty. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For any technical support or assistance, please contact our customer service. We offer 24-hour customer service and have professional technicians in the EU who can provide technical support and help resolve issues.
8. User Tips
- Charger Included: The bike is equipped with a charger, so you don't need to purchase one separately.
- Adjustable Handlebar: The handlebar height is adjustable, allowing you to customize your riding posture for maximum comfort.
- Smooth Acceleration: Thanks to the torque-sensing mid-drive motor, you'll experience smooth and consistent acceleration without jerky movements.
- Optimize Range: To maximize your range, utilize lower pedal assist levels on flat terrain and higher levels only when needed for hills or bursts of speed.
