WiiYii F10

Contents

Wiiyii F10 OBD2 Head-Up Display User Manual

Model: F10 | Brand: WiiYii

1. Introduction

The Wiiyii F10 Head-Up Display (HUD) is a high-quality, plug-and-play OBD2 instrument designed to project essential driving information directly into the driver's line of sight. This device enhances driving safety by allowing drivers to view critical vehicle data such as speed, RPM, water temperature, fuel consumption, and more, without diverting their attention from the road. The F10 features a stylish appearance, HD display, and multiple customizable interfaces, making it a versatile addition to any universal car.

Wiiyii F10 HUD device, front view, displaying speed in MPH.
Figure 1.1: Wiiyii F10 Head-Up Display

2. Package Contents

Before installation, please verify that all items are present and in good condition.

Wiiyii F10 product box and contents including HUD unit, OBD cable, cleaning cloth, and adhesive pads.
Figure 2.1: Product F10 Box and Contents
  • Wiiyii F10 HUD Unit
  • OBD II Connection Cable
  • Anti-slip Mat / Adhesive Pads
  • Cleaning Cloth
  • User Manual (this document)

3. Setup and Installation

3.1 Device Overview

Product dimensions and rear view showing dial button, switch, photosensitive component, serial interface, and Type-C interface.
Figure 3.1: Product Dimensions and Interfaces
  • Facade Dimensions: 6.5 cm (width) x 7.9 cm (height)
  • Back Dimensions: 4.3 cm (depth) x 1.5 cm (stand height)
  • Rear Interfaces: Dial button, Switch, Photosensitive component, Serial interface, Type-C interface.

3.2 Installation Methods

The F10 HUD offers flexible installation options to suit your preference.

  1. Dashboard Installation:
    After removing the adhesive film from the bottom of the LCD meter, choose a suitable position on your car's dashboard to stick it. Ensure the surface is clean and dry for optimal adhesion.
  2. Windshield Installation (Inverted Display Mode):
    For installation on the windshield, the device can be used in inverted display mode. This projects the information onto the windshield for a head-up experience.
Diagram illustrating multiple installation methods, including dashboard and inverted display mode for windshield.
Figure 3.2: Multiple Installation Methods
Wiiyii F10 HUD installed on a car dashboard, showing its display.
Figure 3.3: HUD Installed on Dashboard

3.3 Connection

The F10 HUD connects to your vehicle via the OBD II interface.

  1. Locate your vehicle's OBD II port (typically under the dashboard on the driver's side).
  2. Connect one end of the provided OBD II cable to the HUD's serial interface.
  3. Connect the other end of the OBD II cable to your vehicle's OBD II port.
  4. The device will power on automatically when the vehicle is started, thanks to its intelligent power-saving automatic switch machine feature.

3.4 Adjusting Viewing Angle

The HUD features an intelligent adjustment arc, allowing you to set the display to a comfortable driving angle (up to 225 degrees rotation).

Image showing the HUD with an adjustable arc (225 degrees) for comfortable driving angle, installed in a car.
Figure 3.4: Intelligent Adjustment of Arc

4. Operation

4.1 Multiple Display Interfaces

The F10 HUD offers multiple display interfaces to show various vehicle parameters. The LCD screen provides a clear presentation of true colors.

Image showing the HUD with 'HD picture' and 'Clear presentation of true colors', highlighting speed, RPM, water temperature, and turbine pressure.
Figure 4.1: HD Display of Vehicle Data
Image showing multiple HUD units in different colors, emphasizing 'More cool / beautiful appearance' and the ability to connect multiple meters in series.
Figure 4.2: Multiple HUD Units in Series (Optional)

4.2 Switching Interfaces

Use the dial button on the back of the device to navigate through the display options.

  • Short press the up button: Cycle through interfaces 1 to 5.
  • Short press the "OK" button: Display the clock interface.
  • Short press the button (general): Change the digital interface to show specific parameters like speed, oil pressure, voltage, turbine pressure, oil temperature, water temperature, or vacuum ratio. (Note: Some functions may only be supported by certain car models.)
Diagram illustrating five different display interfaces (Interface 1-5) and a clock interface, with instructions for switching.
Figure 4.3: Multiple Interfaces and Switching
Digital interface options including speed, oil pressure, voltage, turbine pressure, oil temperature, water temperature, and vacuum ratio.
Figure 4.4: Digital Interface Options

4.3 Available Features and Alarms

The F10 HUD provides a wide range of intelligent features and alarms:

  • Driving Data: Speed, Clock, RPM, Voltage, Water Temperature, Fuel Consumption, Mileage, Oil Temperature, Turbine Pressure.
  • Settings: Automatic Sensitivity (for display brightness), KM/H and MPH switching.
  • Alarms: Speeding Alarm, Water Temperature Alarm, Voltage Alarm, Fatigue Driving Reminder.
Grid of intelligent features: speed, clock, RPM, voltage, water temperature, fuel consumption, mileage, oil temperature, turbine pressure, automatic sensitivity, KM/H MPH switching, speeding alarm, water temperature alarm, voltage alarm, fatigue driving reminder.
Figure 4.5: Intelligent Features Overview

5. Maintenance

  • Cleaning: Use the provided cleaning cloth or a soft, dry cloth to gently wipe the display screen and device body. Avoid using abrasive cleaners or solvents that could damage the surface.
  • Storage: When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Cable Care: Ensure the OBD II cable is not kinked or pinched, as this can damage the wiring.
  • Clear Fault Code: The device can assist in identifying and potentially clearing certain fault codes. Refer to your vehicle's manual for specific fault code interpretations and recommended actions.

6. Troubleshooting

The F10 HUD is designed to help monitor and alert you to potential vehicle issues. Below are some common concerns and how the HUD can assist.

Images depicting common car troubles that the HUD can help monitor: oil temperature, clear fault code, water temperature, fuel consumption, average fuel consumption, turbine pressure, car fault alarm, air-fuel ratio.
Figure 6.1: Common Car Troubles Monitored by HUD
ProblemPossible Cause / HUD IndicationSolution / Action
HUD does not power onOBD II cable not properly connected; vehicle ignition off; faulty OBD II port.Ensure cable is securely connected. Turn on vehicle ignition. Test HUD in another vehicle if possible.
Incorrect speed/RPM readingIncompatible vehicle protocol; unit settings incorrect.Verify vehicle compatibility. Check HUD settings for speed/RPM calibration if available.
Over Speed AlarmVehicle speed exceeds preset limit.Reduce vehicle speed. Adjust alarm threshold in HUD settings if desired.
Water Temperature AlarmEngine coolant temperature is too high.Safely pull over and check coolant levels/engine for overheating. Consult a mechanic.
Voltage AlarmVehicle battery voltage is outside normal operating range.Check battery and charging system. Consult a mechanic.
Car Fault Alarm / Check Engine LightVehicle's onboard diagnostic system has detected an issue.The HUD can display a fault code. Note the code and consult your vehicle's manual or a mechanic for diagnosis and repair. The HUD may offer a 'Clear Fault Code' function, but it's recommended to diagnose the issue first.

7. Specifications

FeatureDescription
Brand NameWiiYii
Model NumberF10
Product NameCar HUD
TypeOBD2
PlacementDashboard / OBD
Screen TypeLCD, TFT
Display TypeLCD Widescreen
Resolution1280*800
Dial DisplayDigital
Display InformationTime, Speed, RPM, Water Temperature, Fuel Consumption, Mileage, Oil Temperature, Turbine Pressure, Voltage
UsageDigital Speedometer
Car Model CompatibilityUniversal Car (OBD II Interface)
FeatureSmooth response, Screen Sharing, Over Speed Alarm, Water Temperature Alarm, Voltage Alarm, Fatigue Driving Reminder, Automatic Sensitivity
Case ShapeRectangle
ColorBlack (Multicolors available for series connection)
High-concerned chemicalNone
PerformanceExcellent
Place of OriginGuangdong, China
CertificationCE/ROHS/FCC/ISO9001
Warranty1 Year

8. User Tips

  • Optimal Placement: Experiment with different dashboard positions and viewing angles to find the most comfortable and least distracting setup for your driving style.
  • Interface Customization: Take advantage of the multiple display interfaces. Configure your preferred interface to show the most relevant information for your current driving conditions.
  • Alarm Settings: Customize the over-speed, water temperature, and voltage alarm thresholds to match your vehicle's specifications and personal preferences for alerts.
  • Brightness Adjustment: The automatic sensitivity feature adjusts display brightness based on ambient light. Ensure the photosensitive component is not obstructed for optimal performance.

9. Warranty and Support

9.1 Warranty Information

The Wiiyii F10 Head-Up Display comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. If any quality problems arise, a new replacement will be provided.

9.2 Certifications

Our products are certified with CE, RoHS, and FCC standards. Our factory operations are certified with BSCI and ISO9001, ensuring high-quality manufacturing processes.

Image displaying various certifications including CE, RoHS, FCC, ISO9001, and BSCI.
Figure 9.1: Product Certifications

9.3 Contact Support

For any inquiries, technical support, or warranty claims, please contact our customer service team. We aim to respond to all inquiries within 24 hours.

Business card with contact information for Darcy DING Sales, including WhatsApp, Email, Website, and Company Address.
Figure 9.2: Contact Information
  • WhatsApp: +86 187 7499 7781
  • Email: qianruizheng@gmail.com
  • Company: Shenzhen Wins Novelty Co., Ltd.
  • Address: 2F, BLDG30, ChenTianIndustrialpark, xixiang, Baoan, Shenzhen, China
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.