hiwheel Universal Rear Rack

Contents

Universal Rear Rack for Electric Scooters

Multifunctional Storage Luggage Rack with Installation Hardware

1. Introduction

Thank you for choosing the hiwheel Universal Rear Rack for Electric Scooters. This multifunctional storage luggage rack is designed to enhance the utility of your electric scooter by providing a convenient solution for carrying cargo. It is compatible with various electric scooter models, including M365 and Pro models. Please read this manual carefully before installation and use to ensure proper setup and safe operation.

Front view of the universal rear rack
Figure 1: Front view of the hiwheel Universal Rear Rack.

2. Specifications

Attribute Detail
Brand Name hiwheel
Product Category Scooter accessories
Color Black (applicable to M365 and Pro models)
Dimensions (L*W*H) 27 cm * 15 cm * 17 cm (10.6 in * 5.9 in * 6.7 in)
Weight 0.75 KG
Origin Mainland China
Diagram showing the dimensions of the rear rack
Figure 2: Detailed dimensions of the rear rack.

3. Package Contents

Please check the package for the following items:

  • 1 x Universal Rear Rack
  • Installation Hardware (screws, Allen key)
Rear rack with included screws and Allen key
Figure 3: Rear rack and included installation hardware.

4. Safety Information

  • Ensure all screws are tightened securely before riding.
  • Do not overload the rack. Refer to your scooter's manual for maximum load capacity.
  • Distribute weight evenly on the rack to maintain scooter balance.
  • Regularly check the rack and its mounting points for any signs of wear or loosening.
  • Avoid carrying items that obstruct your view or interfere with scooter operation.

5. Installation Guide

Follow these steps to install the rear rack on your electric scooter:

  1. Prepare your Scooter: Ensure your scooter is turned off and stable, preferably on its kickstand.
  2. Identify Mounting Points: Locate the designated mounting points on the rear fender or frame of your electric scooter. The rack is designed with brackets that align with common scooter designs.
  3. Position the Rack: Place the rear rack over the back wheel, aligning the rack's mounting brackets with the scooter's mounting holes.
  4. Attach with Screws: Use the provided screws and Allen key to securely fasten the rack to your scooter. Start by hand-tightening all screws, then gradually tighten them completely in a criss-cross pattern if applicable, to ensure even pressure.
  5. Verify Stability: Once installed, gently shake the rack to ensure it is firmly attached and does not wobble. Re-tighten any loose screws if necessary.
Rear rack installed on an electric scooter
Figure 4: Example of the rear rack installed on an electric scooter.

6. Operating Instructions

The rear rack is designed for carrying various items. When using the rack:

  • Secure your Cargo: Always use bungee cords, straps, or a net to secure items to the rack. This prevents items from falling off during transit and causing accidents.
  • Check Weight Distribution: Place heavier items closer to the center of the rack and distribute weight evenly to maintain the scooter's balance and handling.
  • Avoid Obstructions: Ensure that carried items do not obstruct the rear light, turn signals (if any), or interfere with the movement of the rear wheel or suspension.

7. Care and Maintenance

  • Regular Inspection: Periodically check all mounting screws and the rack structure for any signs of damage, corrosion, or loosening.
  • Cleaning: Clean the rack with a damp cloth and mild detergent. Avoid abrasive cleaners that could damage the finish.
  • Storage: If removing the rack for storage, keep all hardware together in a safe place.

8. Troubleshooting

Rack feels loose after installation:
Ensure all screws are fully tightened. If the issue persists, check if the mounting brackets are correctly aligned with your scooter's frame.
Items fall off the rack:
Always use appropriate straps or bungee cords to secure your cargo. Ensure items are placed stably on the rack surface.

9. User Tips

  • For added visibility, consider attaching reflective tape or a small rear light to the rack, especially if your cargo might obscure the scooter's built-in lights.
  • When carrying a backpack or bag, use a cargo net to keep it firmly in place and prevent it from shifting during turns or bumps.

10. Warranty and Support

For any questions, concerns, or support regarding your hiwheel Universal Rear Rack, please contact the seller or refer to the official product page for warranty details. Keep your purchase receipt as proof of purchase.

11. Additional Resources

A detailed user manual in PDF format is available for download:

Download User Manual (PDF)

© 2024 hiwheel. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.