HelloRadio V16 PRO Multi Protocol

Contents

HelloRadio V16 Pro Multi-Protocol Remote Control User Manual

Model: V16 PRO Multi Protocol

For RC FPV Drones and Airplanes

1. Introduction

The HelloRadio V16 Pro is an advanced multi-protocol radio transmitter designed for controlling RC FPV drones and airplanes. It features a 4.3-inch IPS touch panel, intelligent voice assistant, programmable gimbal LEDs, and robust safety features, all powered by EdgeTX firmware.

Key Features:

  • 4.3-inch TFT full-color touch display (480x272 resolution)
  • Non-contact 3D vector Hall gimbals with adjustable tension
  • Intelligent Voice Assistant with customizable voice commands
  • Programmable colorful gimbal LEDs and 6-mode switches
  • Internal 4-in-1 multi-protocol or ExpressLRS module
  • External micro JR bay for compatible modules (Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, TBS Tracer)
  • 6-axis gyroscope for motion control capabilities
  • Advanced safety features: overvoltage protection, reverse-polarity protection, real-time voltage/current monitoring with alarms
  • Optimized LCD circuit design for efficient performance
  • Supports USB-C online and SD card offline firmware upgrades
  • Ergonomic design with non-slip soft rubber grips and metal components
HelloRadio V16 Pro Remote Control with packaging and protective case
HelloRadio V16 Pro Remote Control with its packaging and protective carrying case.
HelloRadio V16 Pro FPV Remote Control highlighting key features like programmable aperture, voice assistant, security guard, 6-axis gyroscope, metal roller, and metal panels.
The V16 Pro FPV Remote Control, emphasizing its advanced features including programmable intelligent aperture, intelligent voice assistant, remote control security guard, 6-axis gyroscope, metal roller, and metal panels.

2. Setup

2.1 Unpacking and Initial Inspection

Carefully remove the V16 Pro transmitter from its packaging. Inspect the unit for any signs of damage. Ensure all included accessories are present.

2.2 Battery Installation and Charging

The HelloRadio V16 Pro does not include batteries. It requires a suitable rechargeable battery pack (e.g., LiPo or Li-ion, typically 2S or 3S, 6.6-8.4V DC). Ensure the battery is correctly installed, observing polarity. The transmitter features a charging circuit with overvoltage protection for battery cells and reverse-polarity protection for the power supply. Connect a compatible USB-C charger to the 'Charge' port for recharging.

2.3 Gimbal Adjustment

The V16 Pro features adjustable Hall gimbals. Use a small screwdriver to adjust the tension screws located on the back of the transmitter for both left and right gimbals (Up-Down Adjustment and Left-Right Adjustment) to suit your preference.

2.4 External Module Bay

The transmitter includes an external module bay compatible with micro JR bay modules. This allows for expansion with various RF modules such as Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, or TBS Tracer. Insert the desired module firmly into the bay.

2.5 Port Overview

The V16 Pro is equipped with several ports for connectivity and functionality:

  • USB Data Port: For connecting to a computer for firmware updates, simulator use, or data transfer.
  • TRS 3.5mm Trainer Port (DSC): For connecting to a trainer system or simulator.
  • Earphone Jack: For audio output, including voice assistant feedback.
  • Charge Port: For charging the internal battery.
  • UART Port: For advanced serial communication.
  • SD Card Slot: For storing models, sounds, scripts, and firmware files.
  • SWD Debugging Port: Located at the bottom for advanced debugging and upgrading.
Detailed view of HelloRadio V16 Pro ports including USB, DSC, Earphone, Charge, UART, SD Card, and the External Module Bay with compatible module types listed.
Detailed view of the V16 Pro's various ports and the external module bay, indicating compatibility with micro JR bay modules like Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, and TBS Tracer.

3. Operating Instructions

3.1 Controls Overview

Familiarize yourself with the layout of the V16 Pro transmitter. The diagram below illustrates the main controls and their functions:

Diagram of HelloRadio V16 Pro controls, labeling switches (S1-SD, LS, RS), gimbals (Left, Right), trim buttons (T1-T4), system buttons (SYS, RTN, PAGE, TELE), power button, menu wheel, and 4.3 inch touchscreen.
Overview of the V16 Pro controls, including switches, gimbals, trim buttons, system buttons, power, menu wheel, and touchscreen.
  • S1-SD, LS, RS Switches: Various momentary and 2/3 position switches for assigning functions.
  • Left/Right Gimbals: For primary control of your RC model.
  • T1-T4 Trim Buttons: For fine-tuning gimbal inputs.
  • SYS, RTN, PAGE, TELE Buttons: Navigation and function buttons for the EdgeTX system.
  • Power Button: To turn the transmitter on/off.
  • Menu Wheel: For navigating menus on the touch screen.
  • 4.3" Touchscreen: Primary interface for configuration and monitoring.

3.2 4.3" IPS Touch Panel

The V16 Pro is equipped with a bright and clear 4.3-inch IPS touch panel. This panel provides an intuitive interface for managing models, monitoring channels, and accessing settings. Its design optimizes system resources for a smooth and responsive user experience.

HelloRadio V16 Pro 4.3 inch IPS Touch Panel displaying menu options like Manage Models, Monitor, Radio Settings, Screens, Settings, Telemetry, and About.
The 4.3-inch IPS Touch Panel showing various menu options for transmitter configuration.

3.3 Intelligent Voice Assistant

The V16 Pro features an intelligent voice assistant for human-machine interaction. You can customize voice entries and commands. To activate, say "Hello Radio" to the remote control. If no valid voice is detected within 8 seconds, it enters sleep mode and needs to be reactivated.

The following table lists common voice commands and their corresponding actions:

Configuration table for V16, V16PRO, V16MAX models and an image of the AI Voice Assistant in action with an RC plane.
The AI Voice Assistant feature, showing an example of its use with an RC plane, and a table detailing voice commands and their corresponding actions.
Voice Commands and Actions
Voice CommandResponse (expected actions or functions)
Model menuPop up model settings page
System menuPop up system settings page
Channel messagePop up channel monitor page
TelemetryPop up telemetry information page
Sensor messagePop up sensor information page
ReturnExit previous page, similar to pressing the RTN key
CancelExit previous page, similar to pressing the RTN key
Open gearDrop landing gear
Close gearRetract landing gear
Open flapExtend flap segment at a time, two segments total
Close flapRetract flaps
Trim adjustmentAdjust the trim command
LeftAdjust the aileron to the left by one grid, and adjust the aircraft's aileron to the left
RightAdjust the aileron to the right by one grid, and adjust the aircraft's aileron to the right
Pitch adjustmentAdjust the pitch command
Pitch upAdjust the elevator up by one grid, and the aircraft will head up
Pitch downAdjust the elevator down by one grid, and the aircraft will head down
Rotating adjustmentActive rudder trim command
LeftAdjust the rudder to the left by one grid, and the aircraft will yaw left

3.4 Programmable Gimbal LED

The V16 Pro features programmable gimbal LEDs with 16 color options. Through simple programming, you can customize the LED lighting mode to create dazzling visual effects for your flights. The 6-mode switch can also be programmed with custom functions and corresponding LED colors.

Image showing the internal wiring for the programmable gimbal LED and examples of different LED colors on the gimbals.
The programmable gimbal LEDs, illustrating internal components and various color options.

3.5 Motion Control

Equipped with a 3-axis accelerometer and 3-axis gyroscope, the V16 Pro supports motion control. With future EdgeTX software updates, it will enable advanced functions like motion control and attitude perception.

Diagram illustrating the 6-axis gyroscope chip with X, Y, Z axes for both Gyro and Accel (accelerometer).
Diagram of the 6-axis gyroscope chip, indicating its axes for motion control.

4. Maintenance

4.1 Battery Care

The V16 Pro's charging circuit automatically stops charging when overvoltage is detected in battery cells, protecting the battery. It also monitors charging voltage and current in real-time. Always use a compatible charger and avoid overcharging or deep discharging the battery to prolong its lifespan.

4.2 Firmware Updates

Keep your V16 Pro updated with the latest EdgeTX firmware for optimal performance and new features. Updates can be performed via USB-C connection to a computer (online upgrade) or by loading firmware files onto an SD card (offline upgrade).

4.3 Cleaning and Storage

Clean the transmitter regularly with a soft, dry cloth. Avoid using harsh chemicals or solvents. Store the transmitter in a cool, dry place, away from direct sunlight and extreme temperatures. When storing for extended periods, ensure the battery is charged to a storage voltage (typically 3.8V per cell for LiPo/Li-ion).

5. Troubleshooting

5.1 Power Issues

  • Transmitter does not turn on: Ensure the battery is charged and correctly installed. The V16 Pro has reverse-polarity protection, but incorrect installation can still prevent operation.
  • Abnormal voltage/current alarm: The system is designed to give an alarm or shut down if abnormal voltage or current is detected in the system or RF modules. Check battery connections and external modules for faults.
Diagram illustrating Radio Safeguard features: reverse-polarity protection, circuit protection, module protection, and voltage auto-calibration, along with a screen showing system monitoring data.
Radio Safeguard features, including various protections and real-time system monitoring.

5.2 Voice Assistant Not Responding

If the Intelligent Voice Assistant does not respond, ensure you are speaking clearly and within range. If no valid voice is detected within 8 seconds, the system enters sleep mode. Simply reactivate it by saying "Hello Radio" again.

5.3 General Malfunctions

If you experience unexpected behavior or controls not responding, try the following:

  • Restart the transmitter.
  • Check all physical connections, including external modules and SD card.
  • Ensure your firmware is up to date.
  • Perform a factory reset (refer to the EdgeTX manual for your specific firmware version).

6. Specifications

FeatureSpecification
Dimensions286 x 128 x 182 mm
Weight750g (without battery)
Transmission Frequency2.400GHz - 2.480GHz
Internal Transmitter Module4-in-1 Multi-Protocol OR ExpressLRS internal module
Working Current450mA
Working Voltage6.6-8.4V DC
Radio FirmwareEdgeTX
ChannelsMore than 16 channels (receiver dependent)
Display4.3-inch TFT full-color touch display, 480 x 272 resolution
Gimbal TypeNon-contact 3D vector Hall gimbal
External Module BayMicro JR bay compatible (Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, TBS Tracer etc.)
Upgrade MethodUSB-C online / SD card offline
MaterialMetal components
Recommended Age14+ years
UseVehicles & Remote Control Toys (Airplanes)

7. User Tips

  • Receiver Not Included: Please note that the HelloRadio V16 Pro is a transmitter only. You will need to purchase a compatible receiver separately for your RC model.
  • Customize for Your Style: Take advantage of the programmable gimbal LEDs and 6-mode switches to personalize your transmitter's look and feel. Experiment with different voice commands to enhance your flying experience.
  • Stay Updated: Regularly check for and install the latest EdgeTX firmware updates. These updates often bring new features, performance improvements, and bug fixes.
  • Battery Safety: Always use recommended battery types and ensure proper charging practices to maximize battery life and ensure safe operation. The built-in protections are helpful, but user vigilance is key.

8. Frequently Asked Questions (FAQ)

Q: Is a receiver included with the HelloRadio V16 Pro transmitter?

A: No, the HelloRadio V16 Pro is a standalone transmitter. You will need to purchase a compatible receiver separately, based on your model's requirements and the internal/external RF module you are using.

Q: What type of batteries does the V16 Pro use?

A: The V16 Pro requires a rechargeable battery pack, typically a 2S or 3S LiPo/Li-ion battery, with a voltage range of 6.6-8.4V DC. Batteries are not included with the transmitter.

Q: How do I update the firmware on my V16 Pro?

A: Firmware updates can be performed in two ways: via USB-C connection to a computer for an online upgrade, or by downloading the firmware file to an SD card and performing an offline upgrade. Detailed instructions can be found on the official EdgeTX website or community forums.

Q: Can I use external RF modules with the V16 Pro?

A: Yes, the V16 Pro features an external micro JR bay that is compatible with various external RF modules, including Multi-Protocol-Module, ExpressLRS, Ghost, TBS Crossfire, and TBS Tracer.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your proof of purchase for any warranty claims. Additional resources and community support for EdgeTX firmware can be found online.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.