OUXI OXV8-03G

OUXI Fat Bike 5.0 US Version LCD Display with NFC Instruction Manual

Model: OXV8-03G

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your OUXI Fat Bike 5.0 US Version LCD Display with NFC. This display is designed for use with OUXI E-Bike models C80, C80 Pro, V8, V8 Pro, and V8 Mini. Please read this manual thoroughly before use to ensure proper function and safety.

E-bike with OUXI LCD Display mounted on handlebars
Figure 1: OUXI LCD Display mounted on an E-bike.

2. Package Contents

Verify that all items are present in your package:

  • OUXI Fat Bike 5.0 US Version LCD Display Unit
  • Wired Remote Control Switch
  • NFC Tags (typically two)
  • Mounting Hardware
  • Connection Cables
Close-up of OUXI LCD Display, NFC tags, main connector, and USB port
Figure 2: Display unit with NFC tags, main connector, and USB port.

3. Specifications

Feature Specification
Model Number OXV8-03G
Application E-bike
Part Display
Display Type LED
Feature Easy Install
Product Name OUXI C80/C80 Pro/V8/ V8 Pro/V8 Mini LCD Display with NFC
Fit for E-bike OUXI C80/C80 Pro/V8/ V8 Pro/V8 Mini
Speed 50km/h (Top Speed)
Version V5.0 US version
Voltage 36V-48V
Material Plastic
Electronic Yes

4. Installation Guide

Follow these steps to install your LCD display on your E-bike:

  1. Mount the Display: Securely attach the display unit to your E-bike's handlebars using the provided mounting brackets. Ensure it is positioned for optimal visibility and does not obstruct your view or controls.
  2. Connect Main Cable: Connect the main cable from the display unit to the corresponding port on your E-bike's wiring harness. Ensure the connection is firm and secure.
  3. Connect Remote Switch: Attach the wired remote control switch to the handlebars in an easily accessible location. Connect its cable to the designated port on the display unit.
  4. Secure Cables: Route all cables neatly and secure them with zip ties or cable clips to prevent them from snagging or interfering with moving parts.
Rear view of OUXI LCD Display showing mounting brackets and cable connections
Figure 3: Rear view of the display unit with mounting and cable connections.
OUXI LCD Display with wired remote control switch
Figure 4: Display unit with its wired remote control switch.

5. Operating Instructions

  1. Power On/Off: Press and hold the power button on the remote switch to turn the display on or off.
  2. NFC Activation: To activate the display and unlock your E-bike, tap one of the provided NFC tags against the designated NFC area on the display unit. The display will illuminate and show operational data.
  3. Navigating the Display: Use the buttons on the remote control switch to navigate through different display modes and settings. Typically, 'Up' and 'Down' buttons adjust assist levels, while other buttons may cycle through trip data (ODO, TRIP, TIME) or access settings.
  4. Adjusting Assist Levels: Press the 'Up' or 'Down' buttons on the remote switch to increase or decrease the pedal assist level.
  5. Viewing Information: The display shows real-time speed, battery level, assist level, and other relevant E-bike data.
Video 1: Demonstration of NFC activation and basic display operation, including changing assist levels.

6. Maintenance

  • Cleaning: Use a soft, damp cloth to clean the display screen and housing. Avoid abrasive cleaners or solvents that could damage the surface.
  • Connections: Periodically check all cable connections to ensure they are secure and free from corrosion or damage.
  • Storage: If storing the E-bike for an extended period, ensure the display is clean and dry. Store in a cool, dry place.
  • Software Updates: If software updates become available, follow the manufacturer's instructions carefully.

7. Troubleshooting

  • Display Not Turning On:
    • Check if the E-bike battery is charged and properly connected.
    • Ensure all display cables are securely connected to the E-bike's wiring harness.
    • Verify that the NFC tag is correctly tapped against the display for activation.
  • Incorrect Speed/Distance Readings:
    • Check the speed sensor and magnet on your E-bike wheel for proper alignment and cleanliness.
    • Ensure the wheel size setting in the display's menu (if adjustable) matches your E-bike's wheel size.
  • NFC Not Responding:
    • Ensure the NFC tag is placed directly over the NFC reader area on the display.
    • Try a different NFC tag if available.

8. User Tips

  • Protect the Screen: Consider using a screen protector to prevent scratches and prolong the display's lifespan.
  • Keep NFC Tags Safe: Store your NFC tags in a secure place and consider having a backup.
  • Regular Checks: Periodically check the display's mounting and cable connections, especially after riding on rough terrain, to ensure everything remains secure.

9. Warranty and Support

For any technical assistance, warranty claims, or further inquiries, please contact the seller directly. You can reach them via:

  • Email: zlinshow001@163.com
  • WhatsApp/WeChat: +86 19350856924

Please provide your product model number (OXV8-03G) and a detailed description of the issue when contacting support.

Documents - OUXI – OXV8-03G

no relevant documents