ELEJOY WS-M100-13.8V

Contents

ELEJOY 100W MPPT Solar Charge Controller User Manual

Model: WS-M100-13.8V

1. Introduction

The ELEJOY WS-M100-13.8V is a high-efficiency Maximum Power Point Tracking (MPPT) solar charge controller designed to optimize power harvesting from your photovoltaic (PV) panels and efficiently charge your lead-acid battery system. Featuring advanced MPPT technology, it automatically tracks the maximum power point of the solar array, ensuring maximum energy conversion under varying weather conditions. This controller is built with robust protection features and an IP67 rating, making it suitable for various solar applications.

2. Specifications

FeatureSpecification
Product NameMPPT Solar Charge Controller
ManufacturerELEJOY
ModelWS-M100-13.8V
TypeMPPT
ApplicationSolar Working Station, Solar System Controller, Voltage Controller
Max PV Power100W
PV Input Voltage Range16-25V
Output to Battery Voltage13.8V
Output to Battery Current8A
PWM Conversion Efficiency97%
MPPT Effectiveness99%
Battery Short Circuit ProtectionYes
Temperature ProtectionYes
IP ClassIP67
Line Length10CM
Dimensions (L×W×H)46mm × 32mm × 18mm
Net Weight (N.W.)65g
Work Time (h)100000 hours
CertificateCE
OriginMainland China (Zhejiang)
MPPT solar charge controller efficiency curve
Photovoltaic panel battery conversion efficiency curve, illustrating the effectiveness of the MPPT controller at different load currents and voltages (20V and 25V).

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your MPPT solar charge controller. Please follow these steps carefully:

  1. Mounting: Choose a suitable location for mounting the controller. Ensure it is protected from direct sunlight, excessive heat, and moisture. The IP67 rating indicates it is dust-tight and protected against immersion in water up to 1 meter, but proper ventilation is still recommended for optimal performance.
  2. Wiring Sequence: Always connect the battery first, then the solar panel. Disconnect in the reverse order (solar panel first, then battery).
  3. Battery Connection: Connect the positive (+) and negative (-) terminals of your battery to the corresponding "BATTERY" wires of the controller. Ensure a secure connection.
  4. Solar Panel Connection: Connect the positive (+) and negative (-) terminals of your solar panel to the corresponding "PV INPUT" wires of the controller. Verify that the solar panel's voltage and power are within the controller's specified limits (16-25V, 100W Max).
  5. Verify Connections: Double-check all connections for correct polarity and tightness to prevent damage to the controller or other components.
Wiring diagram and dimensions for ELEJOY WS-M100-13.8V MPPT Solar Charge Controller
Detailed diagram showing the product features, wiring connections for PV input and battery output, and physical dimensions of the WS-M100-13.8V MPPT solar charge controller.
Demonstration of a similar MPPT solar charge controller, showing general wiring connections, internal components, and display interface for battery type selection and monitoring. Note that the specific model shown in the video (EMD60A) may differ from your WS-M100-13.8V controller.

4. Operating Instructions

Once properly installed, the ELEJOY MPPT solar charge controller operates automatically to manage your solar charging system. The controller's primary function is to convert the higher voltage output from solar panels down to the voltage required to charge the battery, while maximizing power transfer.

  • Automatic MPPT: The controller continuously tracks the maximum power point of your solar array to ensure the most efficient charging of your battery. No manual adjustment is required for this function.
  • Battery Type Selection (if applicable): Some ELEJOY controllers feature a display unit that allows selection of battery types (e.g., Lead-Acid, NCM, LFP, Custom). If your model includes a display, refer to its specific instructions for navigating menus and selecting the appropriate battery chemistry to ensure correct charging parameters. For the WS-M100-13.8V, it is designed for 13.8V output, typically for lead-acid batteries.
  • Monitoring (if applicable): If your controller is connected to a display unit, you can monitor real-time data such as PV input voltage and current, battery voltage and current, and controller temperature. This helps in assessing system performance.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your solar charge controller:

  • Visual Inspection: Periodically inspect the controller and all wiring for any signs of damage, corrosion, or loose connections.
  • Cleanliness: Keep the controller clean and free from dust and debris. Although rated IP67, a clean surface helps with heat dissipation.
  • Ventilation: Ensure that the area around the controller has adequate ventilation, especially if it's enclosed, to prevent overheating.
  • Battery Check: Regularly check your battery's condition and electrolyte levels (for flooded lead-acid batteries) as per the battery manufacturer's recommendations.

6. Troubleshooting

If you encounter issues with your solar charge controller, consider the following common troubleshooting steps:

  • No Charging:
    • Check solar panel connections and ensure they are receiving sufficient sunlight.
    • Verify battery connections and ensure the battery is not completely discharged (below minimum operating voltage).
    • Confirm that the solar panel's voltage is within the controller's input range (16-25V).
  • Low Charging Current:
    • Ensure solar panels are clean and free from shading.
    • Check for loose or corroded wiring connections.
    • Verify that the solar panel's power output matches the controller's capacity (100W Max).
  • Controller Overheating:
    • Ensure adequate ventilation around the controller.
    • Verify that the load on the system does not exceed the controller's capacity.
  • Battery Not Holding Charge:
    • This may indicate a problem with the battery itself rather than the controller. Test the battery independently.
    • Ensure the correct battery type is selected (if applicable) and charging parameters are appropriate.

If problems persist after performing these checks, please contact customer support.

7. User Tips

  • For optimal performance, ensure your solar panel's open-circuit voltage (Voc) is within the 16-25V range for this controller.
  • Always use appropriate wire gauges for your solar panel and battery connections to minimize voltage drop and maximize efficiency.
  • Consider installing an inline fuse on the battery positive line for added safety.

8. Warranty and Support

The ELEJOY WS-M100-13.8V MPPT Solar Charge Controller comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, warranty inquiries, or any questions regarding your product, please contact ELEJOY customer service:

  • Email: globesolar001@163.com, victor@globesolarpv.com
  • WhatsApp: +86 130 8505 3509 (Victor)
  • Website: www.globesolarpv.com

When contacting support, please provide your product model (WS-M100-13.8V) and a detailed description of the issue.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.