1. Introduction
The JIKONG V19 JK-PB2A16S30P is a state-of-the-art Smart Battery Management System (BMS) designed for Li-ion, LiFePO4, and LTO battery packs. This advanced BMS features a 300A charging current capacity and an active balancer, making it ideal for household energy storage, communication base stations, building energy storage, industrial equipment backup power, and other demanding applications. It offers comprehensive protection functions including overcharge, over-discharge, overcurrent, and short circuit protection, ensuring the safety and longevity of your battery system. The V19 version is compatible with mainstream inverter communication protocols and supports intelligent interaction via mobile app and host computer software.


2. Setup
2.1. Packing List
Before installation, please verify that all components are present in the package:

- Packing Box
- BMS Unit
- Interface Board
- Adapter
- RJ45 Network Cable (400mm)
- Switch (500mm)
- Heating Adapter Cable x1 (170mm)
- Cells Total B+ Cable x1 (500mm)
- Sampling Line A (900mm)
- Sampling Line A (900mm)
- Sampling Line B (900mm)
- Sampling Line C (900mm)
- Adapter Cable A (300mm)
- Adapter Cable B (300mm)
- Adapter Cable C (300mm)
- 4.3LCD-TTL-P or 7.0LCD-TTL-P (depending on model)
2.2. Component Identification
Familiarize yourself with the various ports and interfaces on the BMS unit:

- RS485-1/2 Interface: 8P8C RJ45 Socket for RS485 communication.
- CAN Interface: For CAN communication.
- Dial Switch: For configuration settings.
- RS232 Interface: 6P6C RJ11 Socket.
- Dry Interface: For external control signals.
- Switch: Power switch.
- P1/P2/P3 Ports: Ports to interface board.
- UART Port: Universal Asynchronous Receiver-Transmitter port.
- Display or Switch Port: For connecting the LCD display or external switch.
- Heat Function Port: For connecting heating elements.
- Sampling Line Ports 1-4: For connecting battery cell voltage sampling lines.
2.3. Wiring Instructions
Proper wiring is crucial for the safe and correct operation of the BMS. Refer to the diagrams below for 16-string and 8-string cell configurations. Ensure all connections are secure and correctly polarized.

General Wiring Steps:
- Connect the main negative terminal (B-) of the battery pack to the B- terminal on the BMS.
- Connect the main positive terminal (B+) of the battery pack to the B+ terminal on the BMS.
- Connect the individual cell voltage sampling lines from the battery pack to the corresponding sampling line ports on the BMS (P1, P2, P3, Sampling line 1-4). Ensure correct order and polarity.
- Connect the charger to the designated charging terminals (P+ and P-).
- Connect the load to the designated load terminals (P+ and P-).
- If using an LCD display, connect it to the Display or Switch Port.
- If using heating elements, connect them to the Heat Function Port.
- For communication with inverters or external devices, connect the appropriate RS485, CAN, or RS232 interfaces.
3. Operating Instructions
3.1. Initial Power-Up and Configuration
After completing all wiring, power up the BMS. The system can be configured and monitored via a mobile application or dedicated PC software.

The mobile app supports iOS, Android, and HarmonyOS, and can be switched to multiple languages. The PC software provides a comprehensive interface for detailed monitoring and settings.

3.2. Adjusting Protection Values
The BMS allows for free adjustment of multiple protection values, including overcharge, over-discharge, overcurrent, temperature, and balance settings. Before making any changes, it is recommended to read the internal parameters of the protection board. Adjustments can be made via the mobile app or PC software.
3.3. Inverter Communication Protocols
The JIKONG V19 BMS is compatible with a wide range of mainstream inverter communication protocols. These protocols can be easily set up through the mobile app or the host computer software.

Supported CAN Protocols include:
- Low-voltage hybrid inverter CAN communication protocol
- PYLON CANBUS Protocol V1.2
- Growatt xxSxxP ESS Protocol V2.01
- CAB-BUS_BMS Protocol_201707
- INVT BMS CAN Bus protocol V1.02
- GoodWe LV BMS Protocol [CAN]V1.7 (For ES/EM/S-BP/BP Series)
- FSS-ConnectingBat-Tl-en-10 Version 1.0
- PACE BMS Modbus Protocol for RS485
3.4. Active Balancing
The BMS features active balancing, also known as lossless balancing. This process transfers energy from cells with higher voltage to cells with lower voltage, achieving voltage balance with minimal energy loss. This significantly improves the equilibrium efficiency by up to 400%, prolonging battery life by ensuring all cells are fully charged and discharged evenly.

4. Maintenance
To ensure optimal performance and longevity of your JIKONG Smart BMS, follow these maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Environmental Conditions: Ensure the BMS operates within its specified temperature and humidity ranges. Avoid exposure to extreme temperatures, direct sunlight, or moisture.
- Software Updates: Regularly check for and install any available firmware or software updates for the mobile app and PC software to benefit from improved features and bug fixes.
- Thermal Management: The BMS is designed with cooling aluminum alloy for efficient heat dissipation. Ensure adequate airflow around the unit to prevent overheating, especially during high charge/discharge cycles.

5. Troubleshooting
If you encounter issues with your JIKONG Smart BMS, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| BMS not powering on/no display | Incorrect wiring, loose connections, faulty power supply. | Check all power connections (B-, B+). Ensure the display cable is securely connected. Verify battery voltage. |
| Battery not charging/discharging | Overcharge/over-discharge protection active, overcurrent protection active, faulty charger/load connection. | Check BMS status via app/PC software for active protections. Verify charger/load connections. Adjust protection parameters if necessary (refer to Section 3.2). |
| Cell voltage imbalance | Normal operation (active balancing will correct), faulty sampling line. | Allow time for active balancing to work. Check sampling line connections for any damage or looseness. |
| Communication issues (App/PC) | Incorrect protocol settings, Bluetooth/USB connection issues, outdated software. | Verify selected communication protocol (refer to Section 3.3). Ensure Bluetooth is enabled and paired, or USB cable is connected correctly. Update app/PC software to the latest version. |
| Overheating | Excessive load, insufficient ventilation, high ambient temperature. | Reduce load if possible. Ensure adequate airflow around the BMS. Check ambient temperature. The cooling aluminum alloy helps, but proper ventilation is key. |
6. Specifications
Detailed technical specifications for the JIKONG V19 JK-PB2A16S30P Smart BMS:

| Parameter | Value (JK-PB2A16S30P) |
|---|---|
| Number of Battery Strings (Li-ion) | 7S-16S |
| Number of Battery Strings (LiFePO4) | 8S-16S |
| Number of Battery Strings (LTO) | 14S-16S |
| Balance Method | Active Balance (Full State On) |
| Balance Current | 2A |
| Conductive Resistance in Main Circuit | 0.35mΩ |
| Continuous Charge Current | 300A |
| Continuous Discharge Current | 300A |
| Maximum Discharge Current | 600A |
| Over Charge Protection Current (ADJ) | 10-300A |
| Other Interfaces (Default) | RS485/232/CAN/UART |
| Protective Plate Size | 300*100*24mm |
| Supply Voltage | 20-70V |
| Standby Power Consumption | 12mW |
| Operating Temperature | -30 to 70°C |
| Maximum Number of Collection Strings | 16S |
| Wiring Output | Common Port |
| Display Interface | Support |
| Heating Interface | Support |
| Upper Computer Function | Support for Android/iOS/Harmony |
| Bluetooth Function | Support |
| Charging overvoltage, overcurrent protection | Support |
| Discharge undervoltage, over current protection | Support |
| Short Circuit Protection | Support |
| Battery Parallel Current Limiting Function | Support |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±3mV |
| Over Charge Protection Voltage | 1.2-4.4V Adjustable |
| Over Charge Release Voltage | 1.2-4.4V Adjustable |
| Over Current Detect Delay | 2-500S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.4V Adjustable |
| Over Discharge Release Voltage | 1.2-4.4V Adjustable |
| Quantity of Temperature Detection | 4 |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Parallel Charging Current Limiting | 10A |
| Address Dial Switch | 4 |
| DRY Contact | 2 |
6.1. LCD Display Dimensions
The BMS is available with either a 4.3-inch or 7.0-inch LCD display. Refer to the dimensions below for planning your installation.


7. User Tips
- Verify Compatibility: Always double-check that your battery type (Li-ion, LiFePO4, LTO) and string count (8S-16S) are compatible with the specific BMS model you have.
- Software Updates: Keep the mobile app and PC software updated to the latest versions to ensure optimal performance and access to new features.
- Parameter Adjustment: When adjusting protection parameters, make small, incremental changes and monitor the system's behavior closely. Incorrect settings can lead to battery damage or safety hazards.
- Professional Installation: If you are unsure about any wiring or configuration steps, it is highly recommended to seek assistance from a qualified professional.
8. Warranty and Support
8.1. Warranty Information
The JIKONG V19 JK-PB2A16S30P Smart BMS comes with a 3-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
8.2. Certifications
This product is certified with CE, FCC, and RoHS, ensuring compliance with international safety and environmental standards.
8.3. Technical Support
For technical assistance, troubleshooting, or any questions regarding your JIKONG Smart BMS, please contact JIKONG customer support:
- Phone: +86 13068721990