BOJECHER YM519

Contents

YM519 OBDII/EOBD+CAN Vehicle Diagnostic Tool Product Manual

Model: YM519

1. Product Overview

The YM519 is a professional handheld vehicle diagnostic tool compliant with OBDII/EOBD+CAN protocols, designed for DIY car enthusiasts and professional technicians. It integrates core functions including engine system diagnosis, battery status detection, fault code reading/clearing, readiness status verification, and DTC library inquiry. Equipped with a clear color display and ergonomic keypad, it supports all 1996 and newer gasoline vehicles (US, European, Asian) that meet OBDII standards, providing accurate and efficient vehicle fault diagnosis.

YM519 OBD2 Scanner front view, highlighting its purpose as a vehicle diagnostic tool.
Figure 1: YM519 Vehicle Diagnostic Tool

2. Core Specifications

ItemSpecifications
ModelYM519
Supported ProtocolsOBDII/EOBD+CAN (ISO9141-2, KWP2000, CAN, J1850 VPW, J1850 PWM)
DisplayColor LCD screen (high-resolution, backlit)
InterfaceStandard 16-pin OBDII male connector (integrated cable)
Power SupplyDC 12V (directly powered by vehicle OBDII port)
Core FunctionsDiagnosis, Battery Test, Readiness Check, DTC Lib, Setting, About
Operating Temperature0°C to 50°C
Storage Temperature-20°C to 70°C
Dimensions146 mm (5.7") x 86 mm (3.3") x 27 mm (1.06")
Net Weight228g (0.5 lb)
Specification parameter table and package contents, showing the device, packing box, and user manual.
Figure 2: YM519 Specifications and Package Contents

3. Key Features

  • Comprehensive OBDII Diagnosis: Reads and clears engine fault codes, displays fault code descriptions, and views real-time data streams (engine speed, coolant temperature, fuel trim, etc.).
  • Battery Status Detection: One-click battery health check (via dedicated BAT key) to assess vehicle battery performance and status.
  • Readiness Status Verification: Checks the readiness of vehicle emission-related systems to ensure compliance with emission inspection standards.
  • DTC Library Inquiry: Built-in fault code library for quick lookup of code definitions and troubleshooting suggestions.
  • Multi-Protocol Compatibility: Supports all mainstream OBDII communication protocols, compatible with most post-1996 gasoline vehicles worldwide.
  • User-Friendly Operation: Intuitive icon-based menu, backlit display for low-light use, and dedicated function keys for quick operation.
Image showing supported protocols and car compatibility for American, European, and Asian vehicles.
Figure 3: Supported Protocols and Vehicle Compatibility
Diagram illustrating multiple core functions of the YM519, including diagnosing faults, clearing codes, battery testing, real-time data, freeze frame, I/M readiness, O2 sensor monitoring, vehicle info, DTC library, component testing, on-board monitor test, and custom shortcut keys.
Figure 4: Multiple Core Functions

4. Installation & Connection

4.1. Pre-Check

  • Ensure the vehicle is parked on a flat surface, the engine is turned off, and the parking brake is engaged.
  • Confirm the vehicle is OBDII-compliant (check the vehicle manual or OBDII port label).

4.2. Connection Steps

  1. Locate the vehicle's OBDII port (usually under the dashboard on the driver's side).
  2. Plug the YM519's 16-pin connector firmly into the vehicle's OBDII port.
  3. Turn the vehicle's ignition key to the ON position (do not start the engine) to power on the diagnostic tool automatically.
  4. Wait for the YM519 to complete system initialization and load the main interface.
Video 1: Demonstration of YM519 features, including screen, protective case, and connection to OBDII port.

5. Operation Instructions

5.1. Keypad Function Definition

KeyFunction
EXITExit current menu, return to previous level
Direction Keys (↑/↓/←/→)Navigate menu options, select functions
OKConfirm selection, execute operation
BATOne-click entry to battery detection mode
F1/F2Custom shortcut functions (varies by menu)
Status IndicatorsGreen (normal), Yellow (warning), Red (error)
Labeled diagram of the YM519 device, showing all buttons and screen indicators.
Figure 5: YM519 Keypad and Interface Layout

5.2. Main Interface Modules

The main screen displays 6 core function icons:

  • Diagnosis: Core engine system diagnosis (read/clear codes, view data streams).
  • Battery: Battery health detection and status analysis.
  • Readiness: Check emission system readiness status.
  • DTC Lib: Inquiry fault code definitions and solutions.
  • Setting: Adjust display brightness, language, and system parameters.
  • About: View device model, software version, and copyright information.
Diagnostic Menu showing 10 modes of OBDII diagnosis.
Figure 6: Diagnostic Menu Options

5.3. Core Operation Flows

Flow 1: Read/Clear Fault Codes

  1. On the main interface, select Diagnosis and press OK.
  2. Select Read Fault Codes; the tool will scan the engine control unit (ECU) and list all stored fault codes.
  3. To clear codes: Select Clear Fault Codes, press OK, and confirm the operation.
  4. Note: Clear codes only after troubleshooting the root cause of the fault.
Diagnostic vehicle information one-click clear process, showing before and after clearing a fault, and the confirmation screen.
Figure 7: One-Click Fault Code Clearing Process

Flow 2: Battery Detection

  1. Press the dedicated BAT key directly (or select Battery on the main interface).
  2. The tool will automatically detect the vehicle battery's voltage, health status, and performance.
  3. View the detection result on the screen (normal/warning/error) and follow the prompts.
Three major battery monitoring projects: Measure battery voltage, Monitor battery, and Estimated battery life.
Figure 8: Battery Monitoring Features

Flow 3: Readiness Status Check

  1. Select Readiness on the main interface and press OK.
  2. The tool will display the readiness status of all emission-related components (e.g., oxygen sensor, catalytic converter).
  3. A "Ready" status indicates compliance with emission inspection requirements; "Not Ready" means the component needs further driving verification.

6. Safety & Maintenance

  1. Vehicle Safety: Do not operate the diagnostic tool while driving; ensure the vehicle is stationary and the engine is off (unless specified otherwise).
  2. Power Safety: Do not connect/disconnect the OBDII connector while the vehicle ignition is on to avoid short circuits.
  3. Operating Environment: Avoid using the tool in extreme temperatures, humid, or dusty environments to prevent device damage.
  4. Cleaning: Wipe the device surface with a dry, soft cloth; do not use liquid cleaners or immerse the device in water.
  5. Storage: Store the tool in a dry, cool place with the connector protected to prevent dust accumulation.
Image highlighting the YM519's new UI, TPU protective case, and comfortable silicone buttons.
Figure 9: Device Features for Durability and User Experience

7. Troubleshooting

ProblemPossible CauseSolution
Device fails to power onOBDII port has no power, loose connectorCheck vehicle battery status, re-plug the OBDII connector
Cannot read fault codesVehicle is not OBDII-compliant, wrong protocolConfirm vehicle compatibility, update tool software (if applicable)
Battery test failsIgnition not turned on, poor battery connectionTurn on ignition, check vehicle battery terminals for corrosion
Display is dimBrightness set too low, backlight failureAdjust brightness in Setting menu; contact support if backlight malfunctions
Communication errorVehicle ECU fault, OBDII port damageCheck vehicle ECU, inspect OBDII port pins for bending/breakage

8. User Tips

  • For optimal battery testing, ensure the vehicle engine is turned off before initiating the battery life estimation function.
  • Always refer to your vehicle's manual to confirm the location of the OBDII port and its compatibility.
  • When clearing fault codes, it is crucial to address the underlying issue first to prevent the codes from reappearing.

9. Packaging Contents

  • YM519 OBDII diagnostic tool (with integrated OBDII cable) ×1
  • User manual ×1
  • Warranty card ×1
  • Storage bag (optional) ×1

10. Warranty Information

This product is covered by a manufacturer's warranty against defects in materials and workmanship for a period of 12 months from the date of purchase. For warranty claims:

  1. Prepare the purchase receipt and product serial number.
  2. Contact the official customer service center to describe the issue.
  3. Do not disassemble the device by yourself; unauthorized disassembly will void the warranty.

For a detailed user manual in PDF format, please refer to the official document: YM519 User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.