1. Introduction
This manual provides essential information for the safe and efficient operation of your TTNergy MPS-V MAX series hybrid solar inverter. The MPS-V MAX series combines the functions of an inverter, solar charger, and battery charger to provide uninterruptible power support. It features a comprehensive LCD display for user-configurable settings and easy access to operational data.
The inverter is designed for both on-grid and off-grid applications, offering flexibility for various solar power system setups. It supports dual output and includes advanced features like a built-in anti-dust kit and smart battery charge design.
2. Key Features
- Pure sine wave output.
- Output power factor 1.0.
- WIFI & GPRS connectivity for iOS and Android monitoring.
- Capable of running without a battery.
- One-click restoration to factory settings.
- Built-in Lithium battery automatic activation.
- High PV input voltage range (90~500VDC).
- Built-in anti-dust kit for harsh environments.
- Smart battery charge design to optimize battery life.
- Dual output capability.
- Intuitive touch button interface.
- Built-in 160A (for 7.2KW/8.2KW models) or 180A (for 10.2KW model) MPPT solar charger.
3. Setup and Installation
Proper installation is crucial for the safety and performance of your inverter. It is recommended that installation be performed by a qualified professional.
3.1 Basic System Architecture
The inverter integrates into a solar power system that can include solar panels, a utility grid connection, a generator, a battery bank, and various home loads. The system can be monitored via a cloud platform, web interface, or mobile application.
3.2 Connection Ports
The rear panel of the inverter provides all necessary connection points for AC input, main AC output, secondary AC output, PV inputs, battery connections, and communication ports.
- AC IN: Connect to the utility grid or generator.
- MAIN OUT: Primary AC output for critical loads.
- SECOND OUT: Secondary AC output for non-critical loads (available in battery mode).
- PV1+, PV1-, PV2+, PV2-: Connect to solar panel arrays. The inverter features dual MPPT inputs.
- COMM: Ethernet port for communication, including WiFi/GPRS module connection.
- POS+, NEG-: Connect to the battery bank.
3.3 System Operation Diagrams
The inverter supports various operational modes depending on whether a battery is connected and the availability of solar power, utility, or generator input. The diagrams below illustrate typical setups.
4. Operating Instructions
4.1 LCD Display and Controls
The inverter is equipped with an LCD display and touch buttons for monitoring and configuration. The display provides real-time information on power generation, consumption, battery status, and more.
Use the touch buttons (typically Up, Down, Enter, and Escape/Menu) to navigate through the display menus and adjust settings such as battery charging current, AC/solar charger priority, and acceptable input voltage range.
4.2 RGB Lighting Modes
The inverter features RGB lighting that indicates its current working mode:
- Red: Battery mode (inverter is drawing power from the battery).
- Blue: Utility mode (inverter is drawing power from the utility grid).
- Purple: PV mode (inverter is primarily drawing power from solar panels).
4.3 Remote Monitoring
The inverter supports remote monitoring via a WiFi/GPRS module, allowing you to track system performance and status from your iOS or Android device using a dedicated mobile application.
4.4 Product Overview Video
5. Maintenance
Regular maintenance ensures the longevity and optimal performance of your inverter. Always disconnect all power sources before performing any maintenance.
- Visual Inspection: Periodically inspect the inverter for any signs of damage, loose connections, or corrosion.
- Cleanliness: Keep the inverter's ventilation openings clear of dust and debris. The built-in anti-dust kit helps in reducing dust accumulation in harsh environments, but regular cleaning of external surfaces is still recommended.
- Battery Health: The smart battery charge design helps optimize battery life. However, it is advisable to monitor battery performance and follow the battery manufacturer's maintenance guidelines.
- Firmware Updates: Check for any available firmware updates through the monitoring application or manufacturer's website to ensure your inverter has the latest features and bug fixes.
6. Troubleshooting
If you encounter issues with your inverter, refer to the following general troubleshooting steps. For detailed error codes and specific solutions, please consult the full product manual or contact technical support.
- No Power Output: Check all AC and DC connections. Ensure solar panels are receiving adequate sunlight and batteries are charged. Verify circuit breakers are not tripped.
- Inverter Not Turning On: Confirm battery connections are secure and battery voltage is within the acceptable range. Check the main power switch.
- Error Codes on LCD: Note down any error codes displayed on the LCD and refer to the detailed manual for their meaning and recommended actions.
- Communication Issues: Ensure the WiFi/GPRS module is correctly installed and connected. Check network connectivity and router settings.
7. Specifications
| Feature | MPS-V MAX 7.2KW | MPS-V MAX 8.2KW | MPS-V MAX 10.2KW |
|---|---|---|---|
| Phase | 1-phase | ||
| Maximum PV Input Power | 7200W | 8200W | 10200W |
| Rated Output Power | 7200W/7200VA | 8200W/8200VA | 10200W/10200VA |
| Maximum Solar Charging Current | 160A | 160A | 180A |
| GRID-TIE OPERATION - PV Input (DC) | |||
| Nominal DC Voltage/Maximum DC Voltage | 360VDC/500VDC | ||
| Start-up Voltage/Initial Feeding Voltage | 90VDC/120VDC | ||
| MPPT Voltage Range | 90VDC~450VDC | ||
| Number of MPPT Trackers/Maximum Input Current | 1/27A | ||
| GRID-TIE OPERATION - Grid Output (AC) | |||
| Nominal Output Voltage | 220/230/240VAC | ||
| Output Voltage Range | 195.5~253VAC | ||
| Nominal Output Current | 31.3A | 35.6A | 44.3A |
| Power Factor | >0.99 | ||
| Feed-in Grid Frequency Range | 49~51±1Hz | ||
| EFFICIENCY | |||
| Maximum Conversion Efficiency (DC/AC) | 98% | ||
| TWO LOAD OUTPUT POWER | |||
| Full Load | 7200W | 8200W | 10200W |
| Maximum Main Load | 7200W | 8200W | 10200W |
| Maximum Second Load (battery mode) | 2400W | 2733W | 3400W |
| Main Load Cut Off Voltage | 44VDC | ||
| Main Load Return Voltage | 48VDC | ||
| OFF-GRID OPERATION - AC Input | |||
| AC Start-up Voltage/Auto Restart Voltage | 120-140VAC/180VAC | ||
| Acceptable Input Voltage Range | 90-280VAC or 170-280VAC | ||
| Maximum AC Input Current | 40A | 40A | 50A |
| Nominal operating frequency | 50/60Hz | ||
| Surge power | 14400W | 16400W | 20400W |
| OFF-GRID OPERATION - PV Input (DC) | |||
| Maximum DC Voltage | 500VDC | ||
| MPPT Voltage Range | 90VDC~450VDC | ||
| Number of MPPT Trackers/Maximum Input Current | 1/27A | ||
| BATTERY MODE OUTPUT (AC) | |||
| Nominal Output Voltage | 48VDC | ||
| Output Waveform | Pure sine wave | ||
| Efficiency (DC to AC) | 94% | ||
| BATTERY & CHARGER | |||
| Nominal DC Voltage | 48VDC | ||
| Maximum Solar Charging Current | 160A | 160A | 180A |
| Maximum AC Charging Current | 140A | 140A | 160A |
| Dimensions (H x W x D) | 468 x 295 x 140 mm | ||
| Weight | 14.5 kg | ||
8. User Tips
- Battery Capacity Matching: The correct matching of battery capacity is crucial. It should be determined based on the specific usage requirements of your loads and application scenarios. Incorrect sizing can lead to insufficient power or wasted generation. Refer to the detailed manual or consult technical support for recommendations.
- Environmental Considerations: While the inverter has a built-in anti-dust kit, ensure it is installed in a well-ventilated area to prevent overheating and maintain optimal performance.
9. Warranty and Support
9.1 Warranty Period
This TTNergy Hybrid Solar Inverter comes with a twelve (12) month warranty period from the date of purchase.
9.2 Technical Support
For technical assistance, troubleshooting, or any inquiries regarding your inverter, please contact TTNergy support. You may reach Felix from China for product information or support at WHATS +86 13786139874.