CERTEON TB007-01

Contents

LED Stack Light TB007-01 User Manual

Integrated Tri-Color Signal Tower Light for Industrial Applications

1. Introduction

The CERTEON TB007-01 Integrated Tri-Color LED Stack Light is an industrial visual signaling device designed for CNC machine tools and automated production equipment. The unit integrates red, yellow, and green LED indicators within a compact housing to provide clear and reliable machine status indication. It is suitable for power status display, operation monitoring, warning alerts, and fault indication in industrial environments.

CERTEON TB007-01 LED Stack Light with Red, Yellow, Green lights and key specifications: Voltage DC 24V, Buzzer Included Yes, Material PC cover + ABS body, Cable Approx. 0.6m, Temp Range -25°C ~ 60°C.
Figure 1: CERTEON TB007-01 LED Stack Light overview with key specifications.

2. Specifications

The following table details the technical specifications of the TB007-01 LED Stack Light:

Parameter Value
Product NameTricolor Warning Light (All-in-one)
ModelTB007-01
Working VoltageDC24V
Light Diameter49mm
With BuzzerYes
Power Consumption1.6-2W (per color)
MaterialLens: PC / Housing: ABS
Input Current80mA (light) / 50mA (buzzer)
Operating Temperature-25°C ~ 60°C
Lighting ModeLED steady light (Red/Yellow/Green)
Cable LengthApprox. 0.6m
Package Weight0.25 kg
Package Dimensions (L x W x H)10 cm x 10 cm x 30 cm
Dimension diagram showing the overall height of 248mm (9.76in), light diameter of 49mm (1.93in), and base dimensions.
Figure 2: Dimension Diagram of the TB007-01 LED Stack Light.
Top-down view of the mounting base with dimensions: 70mm (2.76in) width, 51mm (2.01in) length, and screw hole spacing.
Figure 3: Mounting Base Dimensions.

3. Features

  • Integrated LED Tricolor Design: Red, yellow, and green LEDs built into a single unit with clear color separation and high brightness.
  • Built-in Buzzer, Loud Alarm (≈85dB): Sound and light work together to deliver alerts even in noisy industrial environments.
  • 180° Foldable Base: Enables flexible angle adjustment for versatile mounting.
  • Dual Mounting Options (Surface & Vertical): Supports both horizontal and vertical installation using screws.
  • Durable Materials: ABS body with a high-transparency PC lens offers excellent impact resistance and light diffusion.
  • Easy Wiring with Color-coded Cables: Each wire controls a specific LED color for easy and accurate installation.

4. Safety Information and Precautions

General Precautions:

  • Use only a regulated 24V DC power source. Incorrect voltage or polarity may cause permanent damage.
  • Do not install in explosive or flammable environments unless specifically certified.
  • Avoid exposure to excessive vibration, strong impacts, or corrosive gases.
  • Do not disassemble the unit. There are no user-serviceable components inside.
  • Ensure wiring insulation and connections meet industrial safety standards.
  • Keep out of reach of children.
  • Dispose of electronic waste in accordance with the WEEE Directive 2012/19/EU.

Warning (EU Market Reference):

  • Installation must be carried out by qualified personnel.
  • Risk of electric shock if connected to incorrect voltage.
  • Ensure proper grounding of associated equipment.
  • This product is not intended for household use.

Note: Final warning statements must comply with the official language requirements and applicable directives of the destination EU member state.

5. Setup and Installation

5.1. Preparation

  1. Ensure the power supply is switched off before installation.
  2. Verify that the supply voltage is 24V DC.
  3. Select a mounting location with clear visibility and adequate mechanical support.

5.2. Installation

  1. Secure the base to the equipment surface using appropriate mounting screws.
  2. Route the cable through protective conduit if required by the installation environment.
  3. Connect the wiring according to the control system configuration. Each color channel should be connected to the corresponding control output. Confirm common polarity before energizing.
Image showing the TB007-01 LED Stack Light installed in both surface mounting and vertical mounting configurations.
Figure 4: Surface and Vertical Installation Options.
Wiring diagram for the TB007-01 LED Stack Light. Shows Red, Yellow, Green, and Purple wires connecting to Red Light, Yellow Light, Green Light, and Buzzer respectively, all sharing a Gray common wire to a DC24V power supply. DC24V does not distinguish between positive and negative poles.
Figure 5: Wiring Diagram. DC24V does not distinguish between positive and negative poles.

Wiring Details:

  • Red Wire: Red Light
  • Yellow Wire: Yellow Light
  • Green Wire: Green Light
  • Purple Wire: Buzzer
  • Gray Wire: Common wire to DC24V power supply

The DC24V power supply does not distinguish between positive and negative poles for this device.

6. Operation

  1. Switch on the 24V DC power supply after completing wiring.
  2. Activate the corresponding control signal to illuminate the required color.
  3. Confirm correct visual indication according to machine operating status.

Status Indication Reference:

  • Green: Indicates normal operation.
  • Yellow: Indicates warning, standby, or attention required.
  • Red: Indicates fault, alarm, or emergency condition.

Actual logic depends on your specific control system configuration.

Image showing the TB007-01 LED Stack Light illuminating in red, yellow, and green, demonstrating its three-color integrated LED functionality.
Figure 6: Three-Color Integrated LED Light in operation.
Close-up of the TB007-01 LED Stack Light showing the buzzer port and indicating a loud alarm sound of approximately 85 dB.
Figure 7: Buzzer Port and Sound Level (approx. 85 dB).

7. Storage and Maintenance

Cleaning:

  • Disconnect the power supply before cleaning.
  • Clean the lens using a soft dry cloth. Do not use solvents or corrosive chemicals.

Storage:

  • Store the product in a dry, ventilated environment away from direct sunlight.
  • Recommended storage temperature is between 0°C and 40°C.

Periodic Inspection:

  • Inspect mounting stability and wiring condition periodically.

8. Troubleshooting

If you encounter issues with your TB007-01 LED Stack Light, consider the following common troubleshooting steps:

  • Light not illuminating:
    • Check if the 24V DC power supply is active.
    • Verify that the correct control signal is being sent to the corresponding color wire.
    • Inspect wiring connections for looseness or damage.
  • Buzzer not sounding:
    • Ensure the purple wire for the buzzer is correctly connected and receiving a signal.
    • Check the power supply to the unit.
  • Incorrect color display:
    • Review the wiring diagram (Figure 5) to ensure each color wire is connected to its intended control output.
    • Confirm the control system is sending the correct signals for the desired color.

For complex issues or further assistance, please contact customer support.

9. User Tips

  • When installing, utilize the 180° foldable base to optimize visibility from different angles in your workspace.
  • The color-coded wires simplify installation; always double-check connections against the wiring diagram to prevent errors.
  • The integrated buzzer is loud (approx. 85dB), making it effective in noisy industrial environments. Position the light strategically to ensure the sound is clearly audible.

10. Frequently Asked Questions (FAQs)

Q1: Can this light be used outdoors?
A1: It is designed for indoor industrial environments. If used outdoors, proper rain and dust protection is required.
Q2: How do I wire the lamp for different colors?
A2: Each cable corresponds to one color (Red/Yellow/Green). Use the color-coded wires to connect accordingly. Refer to the wiring diagram in the Installation section.

11. Support and Contact Information

For technical consultations, bulk orders, or any other inquiries, please contact us:

  • WhatsApp: +86 19542723588
  • Email: celiachen008@gmail.com
Contact information for CERTEON, including WhatsApp number and email address.
Figure 8: Contact Information.

12. Compliance Disclaimer

This document is provided for product instruction purposes only. It does not constitute legal advice.

The seller is responsible for ensuring conformity with applicable EU directives such as EMC and Low Voltage Directive where applicable, and for proper CE marking before placing the product on the EU market.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.