1. Introduction
Thank you for choosing the AULA X9 Series Wireless Gaming Mouse. This high-performance mouse is designed for gamers, offering advanced features such as dual sensor options (PAW3395/PAW3950), an 8K polling rate, and versatile tri-mode connectivity (Wired, 2.4G Wireless, Bluetooth). Its lightweight, ergonomic design and durable switches ensure a superior gaming experience.

2. Setup Guide
2.1 Package Contents
- AULA X9 Series Wireless Gaming Mouse
- USB-C Charging/Data Cable
- 2.4Ghz USB Nano Receiver
- User Manual (this document)
2.2 Connectivity Modes
The AULA X9 Series mouse supports three connection modes:
- Wired Mode: Connect the mouse directly to your computer using the provided USB-C cable. This mode also charges the mouse.
- 2.4Ghz Wireless Mode: Insert the USB Nano Receiver into an available USB port on your computer. The mouse should automatically connect.
- Bluetooth Mode: Activate Bluetooth on your computer and put the mouse into Bluetooth pairing mode (refer to the mouse's specific button combination for pairing, usually a switch on the bottom or a button press). Select the mouse from your computer's Bluetooth device list to connect.

2.3 Driver Installation (AULA HUB)
For full customization and optimal performance, download and install the AULA HUB driver software from the official AULA website. This software allows you to configure DPI settings, button assignments, polling rate, and other advanced features.

3. Operating Instructions
3.1 DPI Adjustment
The mouse features a dedicated DPI button (usually located behind the scroll wheel) to cycle through preset DPI levels. You can customize these levels using the AULA HUB software.
3.2 Polling Rate
The AULA X9 Series supports up to an 8K (8000Hz) polling rate for instant response and smoother tracking. This setting can be adjusted via the AULA HUB software.

3.3 E-sports Mode
Engage the E-sports mode through the AULA HUB software or a dedicated button (if available on your model) to unleash the full performance of the PAW3950/PAW3395 sensor for competitive gaming.

3.4 Battery Life and Charging
The mouse is equipped with a 500mAh battery, providing approximately 70 hours of continuous use. Connect the mouse with the USB-C cable to charge. The LED indicator will show charging status.

4. Maintenance
4.1 Cleaning
The mouse features a nano skin-friendly coating that resists fingerprints and is easy to clean. Use a soft, dry cloth to wipe the surface. For stubborn dirt, a slightly damp cloth can be used, ensuring no liquid enters the mouse's internal components.

4.2 Storage
Store the mouse in a cool, dry place away from direct sunlight and extreme temperatures. When not in use for extended periods, ensure the mouse is fully charged and powered off to preserve battery health.
5. Troubleshooting
5.1 Connectivity Issues
- 2.4Ghz Wireless: Ensure the nano receiver is securely plugged into a USB port. Try a different USB port. Re-pair the mouse by turning it off and on, then pressing the pairing button (if available) or re-inserting the receiver.
- Bluetooth: Ensure Bluetooth is enabled on your device. Forget the mouse from your device's Bluetooth settings and re-pair. Make sure the mouse is in Bluetooth pairing mode.
- Wired: Check the USB-C cable connection at both ends. Try a different USB port or cable.
5.2 8K Polling Rate Performance Issues
To achieve optimal 8K polling rate performance, your computer system must meet certain specifications. If you experience lag or instability at 8KHz, check the following:
- Intel Platform: CPU i7-9700K and above, Graphics card Nvidia RTX2060 and above, Memory 16GB and above.
- AMD Platform: CPU Ryzen 7-3700X and above, Graphics card AMD RX5700X and above, Memory 16GB and above.
- Display: Screen refresh rate above 240Hz.
If your system does not meet these requirements, the polling rate may be automatically reduced for a better experience. Consider lowering the polling rate in the AULA HUB software.

5.3 Mouse Not Responding
- Check battery level and charge if necessary.
- Ensure the mouse is powered on.
- Try restarting your computer.
- Reinstall the AULA HUB driver software.
6. Specifications
| Feature | Specification |
|---|---|
| Brand | AULA |
| Model Series | X9 Series (X9, X9 Pro, X9 Ultra) |
| Connectivity | 2.4Ghz Wireless, Bluetooth, Wired (USB-C) |
| Sensor Type | PAW3395 (X9, X9 Pro), PAW3950 (X9 Ultra) |
| Max DPI | PAW3395: 26000, PAW3950: 42000 |
| Max Tracking Rate (IPS) | PAW3395: 650, PAW3950: 750 |
| Max Acceleration (G) | 50G |
| Polling Rate | Up to 8000Hz |
| Switches | Omron Optical Micro Switch (100 million clicks) |
| Coating | Nano Skin-Friendly Coating |
| Weight | Approx. 49g |
| Battery Capacity | 500mAh |
| Battery Included | Yes |
| Package Dimensions (L x W x H) | 12cm x 5cm x 5cm |
| Package Weight | 0.35 kg |


7. User Tips
- Optimize Polling Rate: While 8KHz offers the lowest latency, experiment with 4KHz or 2KHz if your system struggles to maintain stable performance, especially in demanding games.
- Regular Driver Updates: Keep your AULA HUB software updated to ensure compatibility and access to the latest features and performance optimizations.
- Ergonomic Grip: The X9 series is designed for comfort. Experiment with different grip styles (palm, claw, fingertip) to find what feels most natural and reduces strain during long gaming sessions.
- Customization: Utilize the AULA HUB software to customize DPI stages, button macros, and lighting effects to suit your personal preferences and gaming style.

8. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or refer to the official AULA website. Keep your proof of purchase for any warranty claims.