VEVOR Automatic Garage Door Opener (800N/1000N)

VEVOR Automatic Garage Door Opener User Manual

Model: Automatic Garage Door Opener (800N/1000N Variants)

VEVOR Automatic Garage Door Opener main unit and components

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your VEVOR Automatic Garage Door Opener. This operator is designed to provide convenient and reliable automatic opening and closing for garage doors, featuring a powerful AC motor and advanced control systems. Please read this manual thoroughly before installation and operation to ensure safe and efficient use of the product.

2. Safety Instructions

  • WARNING: Gates are not included with this product.
  • Children are forbidden to touch the control devices. Keep remote controls out of reach of children.
  • The maintenance of the product must be conducted by qualified professionals only.
  • Ensure the garage door is balanced and in good working condition before installing the opener.
  • Do not operate the opener if any part is damaged or malfunctioning.
  • Keep hands and loose clothing away from the moving parts of the garage door and opener.
  • In case of power failure, use the self-lock design feature to manually secure the door.

3. Package Contents

Please check the package contents against the lists below for your specific model variant:

For 1000 N Model (ZTGD1000)

  • 1 x ZTGD1000 Garage Gate Opener main unit
  • 2 x Remote Controls
  • 1 x Set of Guide Rail (3 m chain)
  • 1 x Set of Installation Accessories (bolts, nuts, brackets, etc.)
  • 1 x User Manual

For 800 N Model

  • 1 x Garage Gate Opener main unit
  • 2 x Remote Controls
  • 1 x Set of Guide Rail (3 m chain)
  • 1 x Set of Installation Accessories (bolts, nuts, brackets, etc.)
  • 1 x User Manual
All components included in the VEVOR Automatic Garage Door Opener kit

4. Specifications

Feature 1000 N Model 800 N Model
Pull and Push Force 1000 N 800 N
Rated Voltage AC 220V AC 220V
Motor Voltage 24V DC 24V DC
Motor Power 150W max 120W max
Applicable Area 15 m² max 12 m² max
Rail Length 9.8 ft / 3 m (chain) 9.8 ft / 3 m (chain)
Operation Noise <60dB <60dB
Running Speed 120 mm/s 120 mm/s
Remote Control Code Rolling code Rolling code
Remote Frequency 433.92MHZ 433.92MHZ
Remote Battery Voltage 12V, 27A 12V, 27A
Auto Lighting Turns off after 3~5 minutes Turns off after 3~5 minutes

Product Dimensions: Approximately 41.5 inches (105.4 cm) length, 8 inches (20.3 cm) width, 6 inches (15.2 cm) height.

Dimensions of the garage door opener unit

5. Setup and Installation

The VEVOR Automatic Garage Door Opener is designed for convenient installation and debugging. All necessary hardware is provided in the box.

General Installation Steps:

  1. Mount the Opener Unit (A): Secure the main opener unit to the ceiling or appropriate support structure above the garage door.
  2. Assemble and Attach Guide Rail (B): Connect the guide rail sections and attach them to the opener unit.
  3. Connect to Garage Door (D): Attach the end of the guide rail system to the garage door itself, ensuring proper alignment for smooth operation.
  4. Install Self-Lock Mechanism (C): Position and secure the self-lock mechanism on the rail as shown in the diagram.
  5. Wiring: Connect the power cord to a suitable AC 220V power source. Ensure all electrical connections are secure and comply with local regulations.
  6. Testing and Adjustment: Perform initial tests to ensure the door opens and closes smoothly. Adjust limits and force settings as needed.
Installation diagram for the garage door opener

This opener is suitable for sectional and up & over doors, and can be applied to garage doors with a surface area up to 15 m² (for 1000N model) or 12 m² (for 800N model).

Various types of garage doors compatible with the opener

6. Operating Instructions

Remote Control Operation:

The gate opener operator is equipped with two wireless remote controls. These remotes allow you to open, close, or stop the garage door from a distance of more than 25 meters (82 feet).

Remote controls for the garage door opener

Adjustable Automatic Closing:

The opener features an adjustable automatic closing function. It can automatically detect the running power and will stop if it encounters any obstacle during the opening or closing process, ensuring safety. The control panel on the main unit allows for flexible starting and stopping adjustments.

Control panel for adjusting automatic closing

Self-Lock Design:

The opener incorporates a self-lock design. In the event of a power failure, the mechanism can be manually engaged to secure the garage door, preventing unauthorized access or accidental movement.

Self-lock mechanism of the garage door opener

Quiet Operation:

The garage gate opener operates at a noise level of less than 60 dB, ensuring a quiet environment during use.

Noise level comparison for the garage door opener

7. Maintenance

To ensure the longevity and safe operation of your VEVOR Automatic Garage Door Opener, regular maintenance is recommended. However, all maintenance procedures, especially those involving electrical or mechanical adjustments, must be conducted by qualified professionals. Do not attempt to repair or modify the unit yourself, as this may void the warranty and pose safety risks.

  • Regularly inspect the guide rail and chain for any obstructions or signs of wear.
  • Keep the area around the garage door and opener clear of debris.
  • Check the remote controls periodically to ensure they are functioning correctly and replace batteries (12V, 27A) as needed.

8. Troubleshooting

If you experience any issues with your VEVOR Automatic Garage Door Opener, please refer to the following general advice. For complex problems or persistent malfunctions, contact a professional technician.

  • Door not opening/closing: Check power supply, ensure remote control batteries are not depleted, and verify no obstructions are blocking the door's path.
  • Unusual noises: Inspect the chain and rail for any foreign objects or signs of damage. Lubrication may be required for moving parts (consult a professional).
  • Door stops unexpectedly: The automatic closing feature may have detected an obstacle. Clear the path and try again. If the issue persists, the force settings might need adjustment by a professional.

9. User Tips

  • Compatibility: This garage door opener is designed for various types of garage doors, including sectional and up & over doors. It is also compatible with overhead garage doors (basculante).
  • Remote Control Pairing: If you need additional remote controls, ensure they are compatible with the rolling code system and 433.92MHZ frequency of this opener. Incompatible remotes will not function.

10. Warranty and Support

VEVOR provides a one-year warranty for this Automatic Garage Door Opener. This warranty covers manufacturing defects and ensures that any after-sales problems will be addressed. Please retain your proof of purchase for warranty claims.

For technical support or warranty service, please contact VEVOR customer service through their official channels. Do not attempt to disassemble or repair the product yourself, as this may void the warranty.

Related Documents - Automatic Garage Door Opener (800N/1000N)

Preview VEVOR Sliding Gate Operator Manual - MD750/MD550/MD370/PY600ACKMJ0000001V2 Installation and Operation Guide
This guide provides comprehensive instructions for the VEVOR Sliding Gate Operator models MD750, MD550, MD370, and PY600ACKMJ0000001V2. It covers installation, safety, technical specifications, and troubleshooting for efficient operation.
Preview VEVOR Sliding Gate Operator Manual: Installation, Safety, and Troubleshooting
User manual for VEVOR Sliding Gate Operators (MD750, MD370, PY600ACKMJ0000001V2). Includes installation steps, safety guidelines, technical specifications, working principles, and error correction for automated driveway gates.
Preview VEVOR Sliding Gate Operator MD750/MD550/MD370: Installation & Technical Manual
Comprehensive manual for VEVOR Sliding Gate Operators (Models MD750, MD550, MD370). Includes installation guides, technical parameters, safety instructions, troubleshooting, and maintenance for efficient gate automation.
Preview VEVOR MD370 / MD750 Sliding Gate Operator User Manual & Installation Guide
Comprehensive user manual and installation guide for VEVOR MD370 and MD750 Sliding Gate Operators. Includes safety instructions, technical specifications, detailed installation steps for the metal base, steel rack, and limit switches, electrical wiring diagrams, remote control pairing, power supply testing, maintenance tips, and a troubleshooting guide for common issues. Optimize your gate automation with this essential resource.
Preview VEVOR Sliding Gate Operator Manual and Technical Specifications
Comprehensive manual for VEVOR Sliding Gate Operators, including installation guides, technical parameters, safety instructions, troubleshooting, and maintenance for models like MD750, MD370, and PY600ACKMJ0000001V2.
Preview VEVOR Sliding Gate Operator MD370 / MD750 User Manual
Comprehensive user manual for the VEVOR Sliding Gate Operator, models MD370 and MD750. Includes installation, operation, safety instructions, technical parameters, and troubleshooting for automatic gate systems.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.