1. Introduction
The UGREEN USB HUB Docking Station is an all-in-one expansion companion specifically designed for the Mac Mini M4 and M4 Pro. It seamlessly integrates with your Mac Mini, providing an M.2 NVMe SSD enclosure for expanded storage, a variety of high-performance ports, and a raised base for improved ventilation. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal use of your docking station.


2. Setup Guide
2.1 Package Contents
Please ensure all items are present in the package:
- UGREEN USB HUB Docking Station
- USB-C Host Cable (integrated, approx. 4cm)
- User Manual

2.2 Connecting to Mac Mini
- Place the UGREEN USB HUB Docking Station on a flat, stable surface.
- Carefully place your Mac Mini M4/M4 Pro on top of the docking station, ensuring the curvature alignment for a perfect fit. The anti-slip silicone pad on the docking station provides stable placement.
- Connect the integrated 4cm USB-C Host Cable from the docking station to an available USB-C port on your Mac Mini.
- (Optional) For stable operation, especially when using multiple high-power devices or an M.2 SSD, connect an external 15W power supply to the 5V USB-C Charging Port on the rear of the docking station.

2.3 M.2 NVMe SSD Installation
The docking station supports M.2 NVMe SSDs of specifications 2230, 2242, 2260, and 2280, up to 8TB extra storage. Follow these steps to install an SSD:

- Disconnect: Disconnect the docking station from your Mac Mini and any external devices.
- Access Panel: Flip the docking station upside down. Loosen the screws on the bottom panel and carefully remove it.
- Loosen SSD Screw: Locate the M.2 SSD slot and loosen the small screw designed to secure the SSD.
- Insert SSD: Gently insert your M.2 NVMe SSD into the M.2 slot at an angle. Once fully seated, push down the other end and tighten the screw to secure it.
- Reattach Panel: Reattach the bottom panel and tighten its screws.
- Connect & Verify: Connect the docking station back to your Mac Mini. If the drive appears on your computer, the installation is successful. You may need to format the new SSD through Disk Utility on macOS before use.

3. Operating Instructions
3.1 Port Overview
The docking station provides 11 high-performance ports:

- Front Ports:
- 2x USB-A 3.2 Gen2 (10Gbps)
- 1x SD Card Slot (SD 3.0, 104MB/s)
- 1x TF Card Slot (TF 3.0, 104MB/s)
- Rear Ports:
- 2x USB-A 3.0 (5Gbps)
- 1x USB-A 3.2 Gen2 (10Gbps)
- 2x USB-C 3.2 Gen2 (10Gbps)
- 1x 5V USB-C Power Input (15W)
- Internal:
- 1x M.2 NVMe SSD Enclosure (10Gbps)
3.2 Using the Ports
Simply plug your external devices (keyboards, mice, USB drives, portable hard drives, etc.) into the corresponding USB-A or USB-C ports. Insert SD or TF cards into their respective slots for data access. The 10Gbps ports allow for rapid transfer of large files.
3.3 Power Button Groove
The docking station features a recessed groove that aligns with the Mac Mini's power button. This allows you to easily press the Mac Mini's power button without needing to lift the computer off the docking station.

4. Maintenance
- Cleaning: Use a soft, dry cloth to clean the exterior of the docking station. Avoid using liquid cleaners or aerosols directly on the device.
- Ventilation: The curved base design is engineered not to block the Mac Mini's cooling vents. Ensure the area around the docking station and Mac Mini is clear to allow for proper airflow.
- Storage: When not in use for extended periods, store the docking station in a cool, dry place away from direct sunlight and extreme temperatures.

5. Troubleshooting
- Q: The docking station or connected devices are not recognized by my Mac Mini.
- A: Ensure the USB-C host cable is securely connected to both the docking station and your Mac Mini. Try connecting to a different USB-C port on your Mac Mini. Restart your Mac Mini. If using an external power supply, ensure it is properly connected and functional.
- Q: The installed M.2 NVMe SSD is not appearing.
- A: Double-check the SSD installation steps to ensure the SSD is correctly seated and secured. Verify that the SSD is an M.2 NVMe type and not an M.2 SATA. Open Disk Utility on macOS to see if the drive is detected but unformatted. If so, format it for use.
- Q: Data transfer speeds are slower than expected.
- A: Ensure you are using the 10Gbps ports for devices that support these speeds. The actual speed can be affected by the connected device, cable quality, and the performance of your Mac Mini's storage. For optimal performance, ensure an external 15W power supply is connected to the docking station.
- Q: The docking station feels warm during operation.
- A: It is normal for the device to generate some heat during operation, especially under heavy load (e.g., large file transfers, multiple devices connected). Ensure adequate ventilation around the device.
6. Product Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Product Name | Mac mini M.2 SSD Enclosure Docking Station Base |
| Model Number | CM841-65847 |
| Compatible Systems | MacOS (Mac Mini M4/M4 Pro) |
| SSD/HDD Slot | M.2 NVMe (Supports 2230/2242/2260/2280) |
| Max SSD Capacity | 8TB |
| USB Ports | 3x USB-A 3.2 Gen2 (10Gbps), 2x USB-A 3.0 (5Gbps), 2x USB-C 3.2 Gen2 (10Gbps) |
| Card Reader | SD/TF Card Slots (Supports Dual SD/TF Card Reading, 104MB/s) |
| Interface Type | USB 3.2 Gen2 Standard |
| Type-C Power Port | 15W Power Supply (5V IN) |
| Cable Length | ≈4cm (integrated USB-C Host Cable) |
| Material | Aluminum Alloy + PVC |
| Net Weight | 250g |
| Dimensions (L x W x H) | 127mm x 127mm x 29.1mm |
| Protection Features | Surge Protection, Timing Control, Overcurrent Protection |
| Certification | CE, FCC |




7. User Tips
- External Power for Stability: For optimal performance and stability, especially when connecting multiple power-hungry devices (e.g., external hard drives) or utilizing the M.2 SSD, it is highly recommended to connect an external 15W power supply to the docking station's 5V USB-C Power Input.
- SSD Formatting: After installing a new M.2 NVMe SSD, remember to format it using Disk Utility on your Mac Mini before it can be used for storage.
- Cable Management: Utilize the integrated short USB-C host cable for a clean setup. Ensure other cables connected to the hub are not excessively long or tangled to maintain a tidy workspace.
8. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the official UGREEN website or contact their customer support directly. Keep your purchase receipt as proof of purchase for any warranty claims.