1. Important Safety Warnings
- This product is for household use only; do not ingest.
- Keep out of reach of children under 3 years of age.
- Avoid contact with water if the product is electrical.
- Avoid contact with sharp edges.
- Voltage Warning: This product is designed for 220V power outlets and typically comes with plugs for China. If your region uses a different voltage (e.g., 110V) or plug type, you must purchase a suitable plug converter or voltage transformer separately. Failure to do so may damage the product and pose a safety risk.
2. Product Overview
The Timemore Fish Smart Pro X is a temperature-controlled electric gooseneck kettle designed for precise coffee brewing. It features advanced temperature control technology, intelligent power regulation, and an ergonomic design for an optimal pour-over experience.
3. Setup and First Use
- Unpack and Inspect: Carefully remove all components from the packaging. Inspect the kettle and base for any signs of damage or missing parts.
- Placement: Place the kettle base on a stable, clean, and dry surface. Ensure it is away from direct sunlight, heat sources, open flames, or excessive humidity.
- Power Connection: Ensure your power outlet matches the kettle's voltage (220V). If necessary, use a suitable plug converter or voltage transformer (not included). Plug the power cord into a grounded electrical outlet.
- Initial Cleaning: Before first use, fill the kettle with clean water to the MAX fill line. Boil the water, then discard it. Repeat this process 1-2 times to clean the interior.
4. Operating Instructions
4.1 Filling the Kettle
- Remove the lid and fill the kettle with fresh, cold water.
- Do not fill below the MIN line or above the MAX line (900ml capacity).
- Replace the lid securely.
4.2 Temperature Control and Heating
The Fish Smart Pro X features Temp X technology for precise temperature control and intelligent power regulation.
- Setting Temperature: The kettle offers dual-mode temperature control via touch slide and key settings.
- Slide Adjustment: Use the touch-sensitive slide area on the base to adjust the target temperature.
- Button Adjustment: Use the '+' and '-' buttons for fine-tuning. A long press (1 second) on the '+/-' buttons allows for continuous and quick temperature adjustment.
- Quick 100°C Setting: Long press the left heat preservation key to quickly set the temperature to 100°C.
- Intelligent Power Regulation: The kettle dynamically adjusts heating power based on water volume, altitude, and other factors to reach the target temperature quickly and efficiently.
- High Altitude Anti-Boiling: If the target temperature is higher than the actual boiling point at your altitude, the heating will automatically end when the water reaches its boiling point to prevent continuous boiling.
4.3 Heat Preservation (Constant Insulation)
- In heat preservation mode, the kettle maintains the set temperature with a fluctuation of ≤ 0.5°C.
- The recommended upper limit for heat preservation is 98°C.
4.4 Pouring
The gooseneck spout is designed for precise flow control, allowing for even extraction during pour-over brewing.
4.5 Safety Features
- Anti-Dry Burning: The kettle automatically calculates the actual boiling point and real-time water volume to prevent dry burning. If the water level is too low, heating will automatically stop, and the buzzer will sound with