POLVCDG X9

POLVCDG X9 Bone Conduction Swimming Earphones

User Manual

Model: X9 | Brand: POLVCDG

1. Introduction

Thank you for choosing the POLVCDG X9 Bone Conduction Swimming Earphones. These earphones are designed for sports enthusiasts, offering a unique open-ear listening experience with advanced bone conduction technology, IPX8 waterproofing, and 32GB of built-in memory. This manual provides essential information on how to set up, operate, and maintain your earphones to ensure optimal performance and longevity.

POLVCDG X9 Bone Conduction Swimming Earphones in neon green
POLVCDG X9 Bone Conduction Swimming Earphones, designed for swimming, running, and cycling.

2. Safety Information and Warnings

Important Warnings:

  • Magnetic Charging: Ensure the positive and negative poles of the magnetic charging cable correspond correctly. Incorrect connection can prevent charging or even cause a short circuit.
  • Battery Disposal: The built-in rechargeable battery must be disposed of properly for recycling. Do not put the battery into fire to avoid causing an explosion.

Matters Needing Attention:

  • Water Exposure: Do not soak the headphones in seawater or salt water for extended periods. After use, rinse the charging magnetic part with fresh water and dry it thoroughly.
  • Storage: If not used for a long time, charge the earphones at least once a month to maintain battery health.
  • Disassembly: Do not disassemble any part of the product without permission. If the product is found defective, stop using it immediately and contact the seller for after-sales support.
  • Post-Exercise Care: After each exercise, wipe the water from the surface of the headphones, especially the charging magnetic suction port. Clean it in time to prevent sweat and salt water from corroding the charging port and affecting the product's service life.
  • Environmental Factors: Keep the product away from fire, heat sources, freezing sources, and chemicals. Avoid violent impact, disassembly, and extrusion of the product.
  • Charger Compatibility: Use a charging head with an output of 5V 1A or less. If the charge is greater than 5V, it may cause the headphones to overheat, potentially damaging the battery and motherboard.

3. Package Contents

Please check the package for the following items:

POLVCDG X9 product packaging and contents
POLVCDG X9 Product Details: Outer envelope, inner box, POLVCDG-X9 earphones, accessory box, instruction manual, magnetic charging cable, and POLVCDG elastic strip.
  1. Outer envelope
  2. Inner box
  3. POLVCDG-X9 Bone Conduction Earphones
  4. Accessory box
  5. Instruction Manual + Brand Introduction Booklet
  6. Magnetic charging cable
  7. POLVCDG elastic strip

4. Specifications

POLVCDG X9 Product Information with basic, battery, and wireless data
X9 Product Information: Basic Data, Battery Data, and Wireless Data.
POLVCDG X9 Product Parameters
AttributeValue
ModelPOLVCDG X9
Waterproof LevelIPX8
Wireless VersionV6.0
Transmission Distance8-10m
Memory Card Format SupportMP3/M4A/WAV/FLAC/AAC
Battery Capacity220mAh
Charging TimeApprox. 2 hours
Playback Duration8-10 hours @60% volume
ProtocolsA2DP, AVRCP HFP
Weight29g
Dimensions (W x D x H)110mm x 133mm x 50mm
MaterialPC, PVC, ABS, Plastic, TPU, Silica Gel
Voice Assistant Built-inYes
NFC TechnologyYes
With MicrophoneYes
Control ButtonYes
Volume ControlYes
CertificationCE, FCC, RoHS
POLVCDG X9 Product Parameters with size diagram
Product Parameters POLVCDG-X9: Size diagram showing 110mm width and 133mm depth.

5. Setup

5.1. Charging the Earphones

POLVCDG X9 magnetic fast charging port
2-hour magnetic fast charging technology. Connect the magnetic cable to the charging port.
  1. The earphones use a built-in rechargeable battery. For the first use, ensure the battery is fully charged.
  2. If the voice prompt indicates 'low battery', charge the earphones promptly.
  3. Connect the magnetic charging cable to the magnetic charging port on the earphones.
  4. A full charge takes approximately 2 hours. The indicator light will be red during charging and turn blue when fully charged.

5.2. Pairing with a Mobile Device

  1. Enter Pairing State: Upon powering on, the earphones automatically enter pairing mode. The blue indicator light will stay on for 1 second, then the red and blue indicator lights will flash alternately.
  2. Connect to Device: On your mobile phone or computer, turn on the Bluetooth function.
  3. Search and Connect: Search for the device name "POLVCDG X9" and tap to connect.
  4. Confirmation: Once the connection is successful, the blue light will flash quickly twice.
  5. Disconnection Indicator: If the phone actively disconnects, the red and blue lights will flash alternately.

5.3. Song Download (for MP3 Mode)

POLVCDG X9 with 32GB built-in memory
32GB built-in memory for storing a massive number of songs.
  1. Connect the earphones to your computer using the provided magnetic charging cable.
  2. Open the disk drive that appears on your computer.
  3. Import your desired audio files (MP3/M4A/WAV/FLAC/AAC) to the earphone's disk.

5.4. Using the Adjustable Elastic Strip

The POLVCDG elastic strip can be used for two main functions:

  1. Size Adjustment: Adjust the elastic strip to achieve a comfortable and secure fit.
  2. Swimming Stability: When swimming, using the strap can help prevent the earphones from falling off due to water flow impact, ensuring a stress-free experience in the water.

6. Operating Instructions

Instructions for Smart Buttons on POLVCDG X9 earphones
Diagram showing the location and functions of the Volume -, Power, and Volume + buttons.

The POLVCDG X9 features a multi-function control button for easy operation:

Smart Button Functions
ActionButton Press
Power OnPress and hold the Power button for 3 seconds.
Power OffPress and hold the Power button for 3 seconds.
Switch Wireless/MP3 ModeTriple-click the Power button.
Answer/End a CallShort-press the Power button once.
Reject Incoming CallPress and hold the Power button for 1 second.
Launch Voice Assistant (Siri/Google Assistant)Double-click the Power button consecutively.
Pause/Play MusicShort-press the Power button once.
Increase VolumeShort-press the Volume + button.
Decrease VolumeShort-press the Volume - button.
Next TrackPress and hold the Volume + button for 2 seconds.
Previous TrackPress and hold the Volume - button for 2 seconds.
Switch TF Card Playback (Sequential/Shuffle)Quadruple-click the Power button.

6.1. Indicator Light Status

  • Pairing State: Blue light on for 1 second, then red and blue lights flash alternately.
  • Paired Successfully: Blue light flashes quickly twice.
  • Phone Disconnected: Red and blue lights flash alternately.
  • Charging: Red light is continuously on.
  • Fully Charged: Blue light is continuously on.
  • Low Battery Warning: A prompt tone will be played every 3 minutes.
  • USB Data Transfer Mode: Blue light is blinking.
Product demonstration video showcasing features like unboxing, flexibility, IPX8 waterproofing, charging, and Bluetooth connection.

7. Maintenance

  • Cleaning: After each use, especially after sports or water activities, wipe the earphones clean with a soft cloth. Pay particular attention to the magnetic charging port to prevent corrosion from sweat or salt water.
  • Water Exposure: Avoid prolonged soaking in seawater or salt water. Always rinse the magnetic charging contacts with fresh water after exposure to saltwater and dry thoroughly.
  • Storage: Store the earphones in a cool, dry place away from direct sunlight, extreme temperatures, and harsh chemicals. If not used for an extended period, ensure they are charged at least once a month.
  • Handling: Do not subject the earphones to violent impacts, drops, or excessive bending.

8. Troubleshooting

Common Issues and Solutions
ProblemPossible CauseSolution
Earphones won't turn onLow battery; Power button not pressed long enough.Charge the earphones fully. Press and hold the Power button for 3 seconds.
Cannot pair with deviceEarphones not in pairing mode; Bluetooth off on device; Device too far.Ensure earphones are in pairing mode (red/blue flashing). Turn on Bluetooth on your device. Move device closer to earphones (within 10m).
No sound or poor sound qualityVolume too low; Earphones not properly positioned; Corroded charging port affecting connection.Increase volume. Adjust earphone position for optimal bone conduction. Clean the charging port thoroughly.
Earphones won't chargeMagnetic cable not connected correctly; Faulty cable/charger; Corroded charging port.Ensure magnetic poles align. Try a different 5V 1A charger/cable. Clean the charging port.
Earphones fall off during swimmingImproper fit; Not using elastic strip.Adjust the fit using the elastic strip. Ensure the elastic strip is securely used during water activities.

9. User Tips

  • Optimal Sound: For the best sound experience, ensure the bone conduction transducers are placed firmly on your cheekbones, just in front of your ears.
  • Swimming Mode: When swimming, it's recommended to use the built-in 32GB memory for music playback rather than Bluetooth, as Bluetooth connectivity can be unreliable underwater.
  • Comfort: Experiment with the adjustable elastic strip to find the most comfortable and secure fit for your head size and activity.
  • Awareness: The open-ear design allows you to stay aware of your surroundings, which is crucial for safety during outdoor sports like running and cycling.

10. Warranty and Support

For warranty claims, technical support, or any product-related inquiries, please contact the seller or the official POLVCDG customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can also refer to the official user manual PDF for more detailed information: View User Manual (PDF)

© 2024 POLVCDG. All rights reserved.


Related Documents - X9

Preview POLVCDG X7 Bone Conduction Swimming Headphones User Guide
Comprehensive user guide for the POLVCDG X7 bone conduction swimming headphones, covering product specifications, features, controls, operating instructions, pairing, charging, file transfer, and important precautions.
Preview POLVCDG S10 Bone Conduction Swimming Headphones User Guide & Warranty
Official user guide and warranty information for the POLVCDG S10 bone conduction headphones. Learn about features, operation, charging, precautions, and warranty terms for these waterproof, wireless, MP3-enabled sports earbuds.
Preview POLVCDG X34 Bone Conduction Swimming Headphones User Guide
Comprehensive user guide for the POLVCDG X34 bone conduction swimming headphones, covering product parameters, functions, charging, pairing, and important precautions.
Preview POLVCDG X7 Bone Conduction Swimming Headphones User Guide | IPX8 Waterproof Bluetooth 5.3
Comprehensive user guide for the POLVCDG X7 bone conduction swimming headphones. Learn about features, pairing, controls, AI voice control, MP3 mode, charging, and important precautions for this IPX8 waterproof Bluetooth 5.3 device.
Preview POLVCDG H70 Pro Bone Conduction Swimming Headphones User Guide
Comprehensive user guide for the POLVCDG H70 Pro bone conduction swimming headphones, covering features, operation, charging, pairing, and precautions. IPX8 waterproof, Bluetooth 6.0.
Preview POLVCDG X9 Bone Conduction Swimming Headphones User Guide
Comprehensive user guide for the POLVCDG X9 bone conduction swimming headphones, covering product parameters, operation, charging, pairing, and important safety information.