KKMOON SZ308

Contents

ANENG SZ308 Digital Multimeter User Manual

Model: SZ308 | Brand: KKMOON

1. Introduction

The ANENG SZ308 is a handheld digital multimeter designed and manufactured in compliance with international electrical safety standards. This versatile instrument is used for accurately measuring various electrical parameters, including AC/DC voltage, DC current, resistance, diode, buzzer continuity, square wave signals, and hFE triode values. Its robust design prioritizes user safety while providing reliable and precise readings for both professional and hobbyist applications.

2. Package Contents

Before using your ANENG SZ308 Digital Multimeter, please verify that all items listed below are present and in good condition.

Multimeter Package Contents: Pen line (test leads), Multimeter unit, and User Manual.
Multimeter Package Contents: Pen line (test leads), Multimeter unit, and User Manual.
  • 1 x ANENG SZ308 Digital Multimeter
  • 2 x Test Leads (Pen line)
  • 1 x User Manual (English)

3. Product Overview

3.1. Front Panel Functions

Front Panel Functions Diagram: Illustrates the LCD screen, low battery indicator, function turntable, input jacks, and hFE triode socket.
Front Panel Functions Diagram: Illustrates the LCD screen, low battery indicator, function turntable, input jacks, and hFE triode socket.
  • LCD Screen: Displays measurement readings and indicators.
  • Low Battery Indication: Icon appears when battery power is low.
  • Shutdown: Power off position on the function turntable.
  • DC Voltage (V-): Range for direct current voltage measurements.
  • Function Turntable: Rotary switch to select desired measurement function.
  • Resistance (Ω): Range for resistance measurements.
  • 10A Current Red Positive Pen Jack (DCA): Input for high DC current measurements.
  • hFE Triode Jack: Socket for transistor (hFE) testing.
  • AC Voltage (V~): Range for alternating current voltage measurements.
  • hFE Triode: Function for transistor gain measurement.
  • DC Current (A-): Range for direct current measurements.
  • Square Wave Device: Function for square wave signal output.
  • Diode/Buzzer: Functions for diode testing and continuity buzzer.
  • Positive Red Watch Pen Jack (VΩmA): Common input for voltage, resistance, and low current measurements.
  • Negative Black Watch Pen Jack (COM): Common ground input for all measurements.

3.2. Product Dimensions

Product Dimensions: Side and front views with measurements in millimeters and inches.
Product Dimensions: Side and front views with measurements in millimeters and inches.
  • Item Size: 121.8 mm (4.79 in) x 66.5 mm (2.61 in) x 33.5 mm (1.32 in)
  • Item Weight: 72g (2.54oz)
  • Pen Bus Length: 70cm (27.5in)

4. Specifications

The following table details the technical parameters and measurement ranges for the ANENG SZ308 Digital Multimeter.

Detailed Parameter Table: Comprehensive specifications for AC/DC Voltage, DC Current, Resistance, and other functions.
Detailed Parameter Table: Comprehensive specifications for AC/DC Voltage, DC Current, Resistance, and other functions.
FunctionRangeResolutionPrecision
AC Voltage0V-750V0.1V-1V±(1.0%+15)
DC Voltage200mV-1000V0.1mV-1V±(1.0%+10)
DC Current2mA-10A0.01mA-0.01A±(1.5%+5)
Resistance0Ω-2000kΩ0.1Ω-1kΩ±(1.2%+5)
hFE TriodeYes
DiodeYes
BuzzerYes
Square WaveYes
Low Battery IndicationYes
Max Digital Display1999 Counts
MaterialABS
Battery6F22 9V Battery (Not included)

5. Setup

5.1. Battery Installation

The ANENG SZ308 Multimeter requires a 9V 6F22 battery (not included) for operation. Follow these steps to install the battery:

  1. Locate the battery cover on the back of the multimeter.
  2. Slide or unlatch the battery cover according to the arrow guidelines.
  3. Insert a new 9V 6F22 battery, ensuring correct positive (+) and negative (-) electrode placement as indicated in the compartment.
  4. Close the battery cover securely.
Battery Installation: Shows the battery compartment and correct polarity for a 9V 6F22 battery.
Battery Installation: Shows the battery compartment and correct polarity for a 9V 6F22 battery.

WARNING: To avoid electrical shock, remove test leads before replacing the battery or opening the case. Use only a 9V 6F22 battery type.

6. Operating Instructions

This section provides general guidance for using your multimeter for various measurements. Always ensure the correct function is selected and test leads are properly connected before making any measurements.

Multiple Measurement Examples: Visual guide for measuring DC Voltage, hFE Triode, AC Voltage, Buzzer, Diode, Resistance, DC Current, and Square Wave.
Multiple Measurement Examples: Visual guide for measuring DC Voltage, hFE Triode, AC Voltage, Buzzer, Diode, Resistance, DC Current, and Square Wave.

6.1. Measuring DC Voltage (V-)

  1. Turn the function dial to the DC voltage (V-) range.
  2. Connect the red test lead to the VΩmA jack and the black test lead to the COM jack.
  3. Connect the test probes across the component or circuit to measure DC voltage. For example, to measure a 9V battery, connect the red probe to the positive terminal and the black probe to the negative terminal.

6.2. Measuring AC Voltage (V~)

  1. Turn the function dial to the AC voltage (V~) range.
  2. Connect the red test lead to the VΩmA jack and the black test lead to the COM jack.
  3. Connect the test probes across the AC source. For example, to measure household AC voltage (around 220V), insert the probes into the wall outlet.

6.3. Measuring DC Current (A-)

  1. Turn the function dial to the appropriate DC current (A-) range (e.g., 10A for high current, mA for low current).
  2. For 10A current, connect the red test lead to the 10A jack. For mA current, connect the red test lead to the VΩmA jack. Always connect the black test lead to the COM jack.
  3. Break the circuit and connect the multimeter in series with the load. For example, to measure the current of a light strip, plug the red test lead into the DCA current jack and the black test lead into the COM jack, then connect them in series with the light strip.

6.4. Measuring Resistance (Ω)

  1. Turn the function dial to the Resistance (Ω) range.
  2. Connect the red test lead to the VΩmA jack and the black test lead to the COM jack.
  3. Connect the test probes across the component to measure its resistance. Ensure the component is de-energized before measuring.

6.5. Diode Test

  1. Turn the function dial to the Diode symbol.
  2. Connect the red test lead to the VΩmA jack and the black test lead to the COM jack.
  3. Connect the red probe to the anode and the black probe to the cathode of the diode. The display will show the forward voltage drop. Reverse the probes; the display should show 'OL' (open loop) for a good diode.

6.6. Buzzer (Continuity) Test

  1. Turn the function dial to the Buzzer symbol.
  2. Connect the red test lead to the VΩmA jack and the black test lead to the COM jack.
  3. Touch the test probes to both ends of the circuit or component. If there is continuity (low resistance), the buzzer will sound. This is useful for checking fuses or wire breaks.

6.7. hFE Triode Test

  1. Turn the function dial to the hFE transistor gear.
  2. Identify if the transistor is of PNP or NPN type.
  3. Insert the transistor leads (Emitter, Base, Collector) into the corresponding hFE triode jack sockets on the multimeter. The display will show the hFE value.

6.8. Square Wave Device

  1. Turn the function dial to the Square Wave symbol.
  2. Connect the test leads to the appropriate output terminals (usually VΩmA and COM).
  3. Connect the square wave output to a device or oscilloscope to test the signal.

7. Maintenance

7.1. Cleaning

  • Wipe the case with a damp cloth and mild detergent. Do not use abrasives or solvents.
  • Keep the display clean and free from dust.

7.2. Battery Replacement

Replace the battery when the low battery indicator appears on the LCD screen. Refer to section 5.1 for detailed instructions on battery installation.

7.3. Storage

  • If the multimeter is not used for a long period, remove the battery to prevent leakage and damage to the device.
  • Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

ProblemPossible CauseSolution
No display/Power offDead or improperly installed batteryCheck battery installation; replace battery if necessary.
Incorrect readingsWrong function selected; poor test lead connection; damaged test leadsEnsure correct function is selected; check test lead connections; replace test leads if damaged.
Buzzer not sounding during continuity testCircuit is open; high resistance; multimeter not in continuity modeVerify circuit continuity; ensure multimeter is in buzzer mode.
'OL' displayedOverload; open circuit; out of range measurementCheck if the measured value exceeds the selected range; verify circuit connection.

9. User Tips

  • Always start with the highest range when measuring an unknown voltage or current to prevent damage to the multimeter.
  • Ensure the circuit is de-energized before measuring resistance or continuity.
  • Double-check test lead connections for each measurement type to avoid incorrect readings or potential hazards.

10. Warranty and Support

For any issues or questions regarding your ANENG SZ308 Digital Multimeter, please contact the retailer or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.