Introduction
The SYMIK Intelligent Charging Case is specifically designed for Insta360 X4 Air batteries, offering efficient and safe charging alongside advanced monitoring capabilities. This compact device also serves as a secure battery holder and provides integrated storage for microSD cards, making it an indispensable accessory for your Insta360 X4 Air camera.
Figure 1: SYMIK Intelligent Charging Case Overview
Product Features
- Dual-channel Fast Charging: Supports PD3.0/PD2.0 protocols with a maximum total input power of 24W. Each channel is independently adjustable up to 14W for rapid charging.
- Intelligent Power Distribution: A carefully designed optimization algorithm dynamically allocates charging power to the charger channels, ensuring the fastest possible charging speed.
- 0.96" OLED Display: Equipped with a clear OLED screen that provides accurate, real-time battery parameters including voltage, current, state of charge (SOC), state of health (SOH), cycle counts, available capacity, full charge capacity, and cell temperature.
- MicroSD Card Storage: Features integrated slots for securely storing two microSD cards, preventing accidental loss.
- Magnetic Flip Design: The charging case incorporates a magnetic snap cover that firmly attaches to the case body, ensuring a secure closure for batteries and cards.
- Adjustable Charging Parameters: Offers customizable charging power (from 6W to 14W in 2W increments) and an adjustable charging stop level (from 20% to 100% in 5% increments).
- Rigorous Temperature Protection: Battery temperature is monitored 600 times per hour to ensure charging safety. Charging control complies with IEC-62368 standards, with a detailed temperature zoning and charging strategy.
- Multiple Safety Protections: Built-in safeguards include over current, over voltage, over power, short circuit, over charge, and over temperature protection, ensuring safe use and battery longevity.
- Compact and Portable: The lightweight design includes a lanyard hole for convenient and worry-free travel.
Setup and Initial Use
- Power Connection: Connect the charging case to a compatible USB-C power source (e.g., a 30W PD charger) using a USB-C cable. The case supports 5V 3A or 9V 2.7A input, with a maximum of 24W.
- Inserting Batteries: Open the magnetic flip cover. Carefully insert your Insta360 X4 Air batteries into the designated charging slots. Ensure they are correctly oriented for proper contact.
- Inserting MicroSD Cards: If needed, insert up to two microSD cards into the dedicated storage slots. Press the card gently until it clicks to lock it in place. Press again to eject.
- Waking the Screen: The 0.96" OLED screen will automatically display battery parameters upon battery insertion or when the case is connected to a power source. You can also press the button on the side of the case to manually wake the screen and view information without external power.
Figure 2: Waking the Screen and Displaying Parameters
Figure 3: MicroSD Card Insertion and Ejection
Operating Instructions
Monitoring Charging Status
The OLED screen provides a comprehensive interface for monitoring the charging process. Key indicators displayed include:
Figure 4: OLED Screen Interface and Battery Status Legends
- Input Voltage: Displays the current voltage supplied at the USB-C port.
- Source Capability: Indicates the power capacity of the connected power adapter.
- Charge Power Limit: Shows the maximum charging power allocated for each channel.
- System Status Bar: Provides an overview of the overall charging status.
- Battery 1/2 Info: Detailed information for each individual battery slot.
- Real Time Charge Power: Displays the current charging wattage being delivered to the batteries.
- Battery Reported State of Charge: Shows the current charge percentage of the battery.
For a complete understanding of all status icons and their meanings, please refer to the Battery Status Legends illustrated in Figure 4.
Adjusting Charging Power
The charging case allows you to fine-tune the single-channel charging power from 6W to 14W. Adjustments can be made in 2W increments. This feature provides flexibility, enabling you to prioritize faster charging when time is critical or opt for a slower charge to potentially extend battery lifespan.
Figure 5: Adjustable Charging Power
Adjusting Charging Stop Level
You have the ability to set the charging stop level anywhere from 20% to 100%, with adjustments available in 5% increments. This feature is beneficial for battery health management: charging to approximately 60% is recommended for long-term storage to extend battery life, while charging to 80% can also help prolong battery life during regular, casual use.
Figure 6: Adjustable Charging Stop Level
Maintenance
- Cleaning: To clean the exterior of the charging case, use a soft, dry cloth. Avoid using liquid cleaners, abrasive materials, or chemical solvents, as these can damage the device.
- Storage: When the charging case is not in active use, store it in a cool, dry environment. Protect it from direct sunlight, high humidity, and extreme temperatures to preserve its functionality and lifespan.
- Battery Storage: For optimal long-term battery health, it is recommended to charge your batteries to approximately 60% before storing them. Utilize the adjustable charging stop level feature for this purpose.
- MicroSD Card Care: Always ensure that microSD cards are inserted and ejected correctly according to the instructions to prevent damage to both the card and the case's slots.
Troubleshooting
- Screen not displaying information:
-
- Ensure at least one battery is inserted into a slot or the charging case is connected to an active power source.
- Press the side button on the case to manually wake the screen.
- Batteries not charging:
-
- Verify that the USB-C power source is functioning correctly and is capable of providing sufficient power (e.g., a 24W PD charger).
- Check that the USB-C cable is securely connected to both the power adapter and the charging case.
- Confirm that the batteries are correctly inserted into their respective slots, ensuring proper electrical contact.
- Examine the screen for any error messages or temperature warnings. Charging may be temporarily paused if the battery temperature is outside the safe operating range (too high or too low). Refer to Figure 4 for status legends.
- Slow charging speed:
-
- Ensure you are utilizing a power adapter that is compatible with PD3.0/PD2.0 and can deliver at least 24W of power.
- Check the adjustable charging power setting on the case. If it is set too low, increase it to a higher wattage (refer to Figure 5).
- Charging speed can be significantly affected by ambient temperature. Ensure the operating environment is within the recommended range of 0°C to 40°C (32°F to 104°F).
Specifications
Figure 7: Product Specifications and Dimensions
| Feature | Detail |
|---|---|
| Operating Temperature | 32° to 104°F (0° to 40°C) |
| USB-C Input | 5V 3A; 9V 2.7A (24W Max) |
| Charge Power (Per Channel) | Up to 14W adjustable |
| Product Weight | 3.5 Ounces / 98 grams |
| Charging Time (0-80% @ 12W) | 39 minutes* |
| Charging Time (0-100% @ 12W) | 61 minutes* |
| Product Size (L x W x H) | 2.99" x 2.36" x 1.89" (76 x 60 x 48 mm) |
| Product Color | High Tech Gray |
| Material | Plastic |
| Compatible Camera | Insta360 X4 Air |
*Charging times are based on SYMIK lab data using a 30W PD charger, brand new original batteries, and the charging case set to 12W/channel charging power, at room temperature (25°C). Actual charge time may vary based on battery condition, power source, and environmental factors.
User Tips
- Optimize Battery Lifespan: Make use of the adjustable charging stop level feature. For long-term battery storage, charging batteries to approximately 60% is highly recommended to maximize their overall lifespan. For regular, day-to-day use, charging to 80% can also contribute to prolonging battery health compared to always charging to 100%.
- Achieve Fastest Charging: To experience the quickest possible charging times, ensure that you connect the SYMIK Intelligent Charging Case to a power adapter that fully supports PD3.0/PD2.0 fast charging protocols and can deliver a minimum output of 24W.
- Temperature Awareness: Be mindful of the ambient temperature during charging. The charger is equipped with advanced temperature monitoring and will automatically adjust charging parameters or even stop charging if the battery temperature falls outside the safe operating range (0°C to 40°C) to prevent potential damage and ensure safety.
- Secure Storage: Always engage the magnetic snap cover when batteries and microSD cards are stored within the case. This ensures they remain securely in place, especially important when transporting the case or during travel.
- Enhanced Portability: Take full advantage of the integrated lanyard hole. Attaching a lanyard or wrist strap can provide an extra layer of security and convenience, making the charging case easier to carry and less prone to being misplaced.
Warranty and Support
For detailed warranty information, technical support, or any service-related inquiries regarding your SYMIK Intelligent Charging Case, please refer to the official SYMIK website or contact your authorized retailer. It is advisable to retain your proof of purchase, as it will be required for any warranty claims.
