1. Introduction
The EARMOR M51 PTT (Push-to-Talk) Adapter is designed to facilitate communication between EARMOR M32/M32H tactical headsets and various walkie-talkie radios. This adapter ensures seamless integration for tactical and outdoor communication needs.
Important Note: This PTT Cable cannot be used alone. It requires an EARMOR M32/M32H headset for functionality.
The adapter features a dual-pin universal interface, making it compatible with most brands of walkie-talkies, including popular models from Baofeng and Kenwood. It utilizes tactical (NATO J11) wiring for reliable performance.
2. Safety & Warnings
- To avoid danger of suffocation, keep this product and its packaging away from babies and children.
- Do not use this product or its packaging in cribs, beds, carriages, or play pens. This product is not a toy.
- Ensure all connections are secure before operation to prevent accidental disconnections or signal loss.
3. Product Features
- Dual-pin Universal Interface: Compatible with most walkie-talkie brands (e.g., Baofeng, Kenwood).
- Tactical Wiring (NATO J11): Specifically designed for tactical communication headsets.
- Convenient Back Clip Design: Allows for quick and secure attachment to belts, tactical vests, or other gear for easy access.
- Durable Wire: Anti-stretching and anti-winding properties ensure longevity and reliability in demanding outdoor environments.
4. Setup Instructions
-
Connect to Walkie-Talkie
Insert the two-pin plug end of the PTT adapter into the audio interface of your walkie-talkie. Ensure the plug is fully inserted and makes good contact for proper signal transmission.
Image: The EARMOR M51 PTT Adapter showing its two-pin connector for walkie-talkie connection.
-
Connect Tactical Headset
Dock the interface at the other end of the PTT adapter with the audio cable of your EARMOR M32/M32H tactical headset. Tighten or snap it in place to ensure a secure connection and prevent loosening during use.
Image: EARMOR PTT adapter connected to a radio and tactical headset.
-
Fix PTT Module
Utilize the back clip on the PTT control module to fix it to your belt, tactical vest, or any other easily accessible position. This allows for convenient and quick pressing during operation.
Image: The EARMOR M51 PTT Adapter securely clipped to a tactical vest.
5. Operating Instructions
-
Transmit Voice (Push-to-Talk)
To send a voice message through the walkie-talkie, press and hold the PTT button on the adapter. Speak clearly into your headset microphone. Release the button to end the transmission.
-
Receive Voice
When the PTT button is released, the adapter automatically switches to receiving mode, allowing you to listen to incoming communications from the other party through your tactical headset.
6. Maintenance
- Cleaning: Wipe the adapter with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: After each use, disconnect the headset from the PTT adapter first, then unplug the PTT adapter from the walkie-talkie. Carefully coil and store the cables to prevent entanglement and damage.
- Environmental Conditions: Keep the device dry and away from extreme temperatures. Avoid exposing it to direct sunlight for prolonged periods.
7. Troubleshooting
- No Audio / No Transmission:
- Ensure both the PTT adapter and headset are securely connected to the walkie-talkie.
- Verify that your EARMOR headset is compatible with the PTT adapter (M32/M32H series).
- Confirm that your walkie-talkie is powered on and functioning correctly.
- Check the wiring type: EARMOR headsets and PTT adapters use tactical (NATO J11) wiring. Civilian wiring is incompatible.
- Intermittent Connection:
- Check for any loose connections at both the walkie-talkie and headset interfaces.
- Inspect cables for visible damage or kinks.
Image: Diagram illustrating the difference between Tactical (NATO J11) and Civilian wiring.
8. Specifications
| Attribute | Detail |
|---|---|
| Product Name | PTT Adapter |
| Internal Model | YHKEMA |
| Batch Number | 66018 |
| Type | Headset Accessory |
| Origin | Mainland China |
| Compatibility | EARMOR M32/M32H Headsets, Dual-pin walkie-talkies (e.g., Kenwood, Baofeng) |
| Wiring Standard | Tactical (NATO J11) |
| Package Dimensions (L x W x H) | 13 cm x 12 cm x 7 cm |
| Package Weight | 0.124 kg |
For a detailed list of compatible Kenwood and Baofeng radio models, please refer to the product images or the official product page.
Image: Example of compatible radio models.
9. User Tips
- Verify Compatibility: Always confirm that the PTT adapter's wiring (Tactical/NATO J11) matches your headset and radio before purchase and use to avoid compatibility issues.
- Wiring Check: If unsure about wiring, use a multimeter set to continuity tester function. For tactical wiring, two rings on the plug should show continuity (EARPH + and EARPH -).
- Secure Connections: Ensure all plugs are fully inserted and tightened to prevent signal loss or intermittent communication during critical operations.
10. Warranty & Support
For product support, warranty inquiries, or technical assistance, please contact the manufacturer or authorized representative:
- Manufacturer: Shenzhen Yanhao Trade Co., Ltd.
- EU Authorized Representative: SUCCESS COURIER SL
- Address: CALLE RIO TORMES NUM.1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain
- E-mail: successservice2@hotmail.com
- Tel: +34910602659
For additional documentation, including the original user manual in PDF format, please refer to the product's official documentation page: View User Manual (PDF)