1. Introduction
Thank you for choosing the Moman RS-H4P Motorbike Helmet Headset. This manual provides detailed instructions for the proper use, installation, and maintenance of your device. Please read it carefully before use to ensure optimal performance and safety.

2. Caring For Your Product
- Please keep the product in a dry, clean, dust-free environment.
- Keep corrosive chemicals, liquids, and heat sources away from the product to prevent mechanical damage.
- Use only a soft and dry cloth for cleaning the product.
- Do not attempt to disassemble the product. Doing so voids the warranty.
- If not used for a long time, keep the product in a dry place. Please charge the product regularly every 3 months to prevent battery drain.
- This product may generate heat during use, which is normal. Please leave some space for heat dissipation during use.
3. Packing List
Ensure all items are present in the package:
- RS-S Wireless Helmet Headset x1
- Changeable Hard Mic and Soft Mic x1
- Double Side Tape x1
- Hexagon Key x1
- Back Clip x1
- Type-C Charging Cable x1
- Tape Kit (Speaker *4/ Hard Mic *2/Soft Mic *2) x1
- User Manual x1

4. Setup and Installation
4.1. Controls Overview
Familiarize yourself with the device buttons:
- Volume-/Previous Button
- Volume +/Next Button
- FM Radio Button
- Voice Assistant Activate Button
- On/Off Button/Play or Pause Button/Call Answer Button
- Indicator
- Charging Port
- Speaker/Microphone Interface

4.2. Helmet Installation
Before permanent installation, connect your phone and test sound/volume. Adjust speaker position in the helmet if sound quality differs after installation.
Method 1: Adhesive Mount
- Loosen the screws on the back clip and separate the two parts.
- Stick the provided double-sided tape near the lower edge of your helmet, then attach the inner part of the back clip on the tape.
- Slide the headset into the back clip slot and lock it firmly in place.
- Open the liner at the ear position and clean the EPS (Expanded Polystyrene) surface of the helmet, then stick the provided tape on both the left and right sides of the helmet.
- Attach the speaker on the fixed tape surface. The speaker with the shorter cable should be placed close to the headset. Fix the microphone in place and arrange the helmet lining and cable.
- Insert the headset cable into the headset's jack, and secure the headset cable neatly inside the helmet.
Method 2: Clip Mount
- Slide the back clip from the lower edge of the helmet and secure it in place.
- Slide the headset into the back clip slot and lock it firmly.
- Follow steps 4-6 from Method 1 for speaker and microphone installation.
Removal (Both Methods):
- Unplug the cable from the headset.
- Press the inside buckle of the middle on the clip with one finger.
- Slide the headset from the back clip.

5. Operating Instructions
5.1. Power On/Off
- Power On: Long press the On/Off button for 3 seconds. You will hear "Power On" and the RGB light will flash.
- Power Off: Long press the On/Off button for 3 seconds. You will hear "Power Off" and the red light will be steady before turning off.
5.2. Bluetooth Pairing
- Power on the device and wait for the RGB light to flash, indicating it's in Bluetooth pairing mode.
- Enable Bluetooth on your phone and connect to the device named "RS-H4P".
- Upon successful connection, you will hear "Bluetooth Connected" and the RGB light will become steady.
Note: The RS-H4P does not support intercom function and cannot interconnect with other Moman models.
5.3. Phone Control
Disconnect Bluetooth to switch between Manual Answer Mode and Automatic Answer Mode by double-clicking the Voice Assistant Activate Button.
- Automatic Answering Mode: Calls will be automatically picked up after 10 seconds. Short press the On/Off button to end the call.
- Manual Answering Mode: Short press the On/Off button to pick up/end a call. Long press the AI Voice Assistant Activate button for 2 seconds to reject a call.
- Redial Last Call: Double-click the On/Off button to redial the last call.

5.4. Music Control
- Pause/Play: Short press the On/Off button.
- Next Song: Short press the '+' button.
- Previous Song: Short press the '-' button.
- Volume Up: Long press the '+' button. A "Boom Sound" indicates maximum volume.
- Volume Down: Long press the '-' button.

5.5. Activate Voice Assistant
- Short press the Voice Assistant Activate button to open your phone's AI voice assistant (e.g., Siri, Google Assistant, S-Voice).
5.6. FM Radio
- Turn On/Off: Double-click the FM button. You will hear "FM Mode".
- Station Scanning: Short press the FM button to start or stop FM radio station scanning. The device can save up to 10 FM stations (76-108MHz). Re-scanning will delete previously saved stations.
- Next Station: Short press the '+' button.
- Previous Station: Short press the '-' button.
- Volume Up: Long press the '+' button. A "Boom Sound" indicates maximum volume.
- Volume Down: Long press the '-' button.

5.7. Language Settings
- Disconnect the Bluetooth connection.
- Double-click the '+' button to switch between Chinese and English voice prompts.
5.8. Reset
- Long press the FM button for 8 seconds to perform a factory reset. This will delete all pairing memory.
- During reset, blue and green lights will flash simultaneously. After reset, the RGB light will flash.
6. Charging
- When the battery is low, the red light will flash and you will hear "low battery, please charge".
- Connect the device using the provided Type-C charging cable.
- The red light will be on during charging.
- The light will turn off when fully charged.
- Charging Voltage: 5V-0.5A.
- Important: Please power off the device before charging.

7. Specifications
| Feature | Detail |
|---|---|
| Model | RS-H4P |
| Brand Name | SYNCO (Moman) |
| Walkie Talkie Type | Ear Hook Walkie Talkie |
| Use | Motor vehicle |
| Material | Plastic |
| Connection Distance with Mobile | 10m |
| Wireless Version | 5.1 |
| Wireless Name | RS H4P |
| Wireless Protocol | A2DP, AVRCP |
| Charging Port | Type-C |
| Battery | 3.7V/1000mAh Lithium Battery |
| Charging Time | 1.5H |
| Charging Voltage | 5V |
| Speaker Diameter | 40mm |
| Frequency Range | 2.4GHZ |
| Temperature Range | -20~50℃ |
| Waterproof / Water-Resistant | IP65 |
| Is_Display | No |
| Maximum Range | <1.5km |


8. Troubleshooting
- Device not powering on: If not used for a long time, the product might not turn on immediately due to battery drain. Charge it for a while, and it should resume operation.
- Sound/Volume issues after helmet installation: Adjust the position of the speaker inside the helmet. It is recommended to test sound and volume before final installation.
- Interference with radio communications: This equipment generates and can radiate radio frequency energy. If it causes harmful interference, try reorienting or relocating the receiving antenna, increasing separation between equipment and receiver, or connecting to a different circuit outlet. Consult a dealer or experienced technician if issues persist.
- General malfunctions: Malfunctions may be caused by dropping or external force. Do not attempt to disassemble the product. Please have the product checked or repaired by authorized technicians if any malfunctions happen.

9. User Tips
- Intercom Function: The RS-H4P does NOT support intercom function and cannot interconnect with other Moman models.
- Speaker Placement: For best audio quality, ensure speakers are correctly positioned within the helmet. Test before final adhesive application.
- Regular Charging: If storing the device for an extended period, charge it every 3 months to maintain battery health.
- Heat Dissipation: The product may generate heat during use. Ensure adequate space for heat dissipation.
- Glove-Friendly Controls: The ergonomic design with raised tactile buttons is optimized for use with gloves.
10. Warranty and Support
Do not attempt to disassemble the product. Doing so voids the warranty. Failure to follow all instructions may result in mechanical damage, and warranty does not apply to human errors. Please have the product checked or repaired by authorized technicians if any malfunctions happen.
For further support, please refer to the official Moman website or contact your retailer.
11. FCC Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
12. APP and WiFi Connection (for Moman H4C model, if applicable)
The provided video demonstrates how to connect a Moman H4C model (which includes recording functionality) to a smartphone via WiFi and an app called "Roadcam" for viewing recorded videos and photos. While the RS-H4P model described in this manual does not explicitly mention recording features, this video illustrates a common connectivity method for similar Moman devices.