Introduction
Welcome to the user manual for your ATK Z87 PRO Custom Tri Mode Esports Mechanical Keyboard. This keyboard is engineered for esports performance, featuring a semi-aluminum frame, transparent keycaps, a PVD light bar, and a Gasket structure for an enhanced typing experience. It supports tri-mode connectivity (Wired, 2.4G Wireless, and Bluetooth 5.0) and offers a 1ms E-Competition Level Delay for ultra-low latency.
Package Contents
Please check the box for the following items:
- Packing box
- Keyboard body
- Key-pulling and shaft-pulling device
- Three free transparent key caps for shaft body (Z87 PRO Periodic Table gift only)
- Usage guide
- Data connection line (USB cable)
- Warranty Voucher
- Dust cover
Setup
1. Connecting the Keyboard
The ATK Z87 PRO supports three connection modes: Wired, 2.4G Wireless, and Bluetooth 5.0.
- Wired Mode: Connect the provided USB data connection line to the keyboard and your computer. The keyboard will be automatically recognized.
- 2.4G Wireless Mode: Plug the 2.4G USB receiver (usually found in a compartment on the keyboard) into your computer's USB port. Switch the keyboard to 2.4G mode using the switch on the keyboard.
- Bluetooth Mode: Switch the keyboard to Bluetooth mode. On your device (computer, laptop), search for Bluetooth devices and select "ATK Z87 PRO" to pair. Refer to your device's operating system for specific Bluetooth pairing instructions.
2. Software Installation (ATK HUB)
For full customization of lighting effects, keyboard performance, sensitivity, and other parameters, download and install the ATK HUB software.
- Driver Download: Visit ATK.PRO to download the latest ATK HUB software.
- Installation: Follow the on-screen instructions to install the software.
Operation
1. Switching Connection Modes
Use the physical switch located on the keyboard to toggle between Wired, 2.4G Wireless, and Bluetooth modes.
2. RGB Lighting Control
The ATK Z87 PRO features 16 million color ARGB lighting with electric competition-grade lamp beads and an independent lamp control chip for reduced delay and vibrant effects.
- Onboard Controls: Use specific key combinations (refer to the included Usage Guide) to cycle through preset lighting effects and adjust brightness.
- Software Customization: For advanced customization, including per-key lighting, dynamic effects, and color schemes, use the ATK HUB software.
3. PVD Light Bar
The keyboard includes a PVD decorative light bar that enhances the aesthetic with exquisite design and multi-functionality, changing with the keyboard's light effects to increase atmosphere.
4. Keycap and Switch Types
The keyboard features MDA/Original Key Caps made from PBT material, designed to resist oil and fading. It also utilizes a five-sided sublimation process for personality PC transparent keycaps. Various shaft (switch) types are available, each offering a different feel and response:
- Power Silver Shaft: Advance Linear Axis, low pressure grams, not tired after long use. Trigger stroke: 2.0±0.6mm, Total stroke: 3.6mm, Trigger pressure: 40±10gf.
- Princess Axis: Linear Axis, sound HIFI, feel smooth. Trigger stroke: 2.0±0.5mm, Total stroke: 3.6mm, Trigger pressure: 40±10gf.
- Aniya Axis: Advance Linear Axis, sound HIFI, bottoming out ahead of time. Trigger stroke: 2.0±0.2mm, Total stroke: 3.2±0.2mm, Trigger pressure: 42±5gf.
- Blueberry Ice Cream Shaft: Linear Axis, Super HIFI, extended spring. Trigger stroke: 1.0±0.4mm, Total stroke: 3.5±0.3mm, Trigger pressure: 40±10gf.
Maintenance
1. Cleaning the Keyboard
- Dust Removal: Use a soft brush or compressed air to remove dust and debris from between the keycaps.
- Keycap Cleaning: Gently remove keycaps using the provided key-pulling device. Clean keycaps with a mild soap solution and a soft cloth, then dry thoroughly before reattaching.
- Surface Cleaning: Wipe the keyboard's surface with a slightly damp, lint-free cloth. Avoid excessive moisture.
2. Keycap and Switch Replacement
The ATK Z87 PRO is designed for easy keycap and switch replacement. Use the provided key-pulling and shaft-pulling device for safe removal and installation.
- Keycap Removal: Place the key-pulling tool over the keycap and pull upwards gently until the keycap detaches.
- Switch Removal: For hot-swappable switches, use the shaft-pulling device to grip the switch and pull it straight up.
- Installation: Align the new keycap or switch with the appropriate slot and press down firmly until it clicks into place.
Troubleshooting
- Keyboard Not Responding:
- Ensure the USB cable is securely connected in wired mode.
- For wireless modes, check battery level and ensure the receiver is properly plugged in (2.4G) or Bluetooth is paired correctly.
- Try restarting your computer.
- Wireless Connectivity Issues:
- Ensure the keyboard is within range of the receiver/device.
- Check for interference from other wireless devices.
- Re-pair the Bluetooth connection or re-plug the 2.4G receiver.
- RGB Lighting Not Working/Incorrect:
- Check onboard lighting controls (key combinations).
- Ensure ATK HUB software is installed and updated.
- Verify settings within the ATK HUB software.
- Keys Not Registering:
- Remove the keycap and inspect the switch for any obstructions.
- If hot-swappable, try reseating the switch or replacing it with a spare.
Specifications
The ATK Z87 PRO keyboard offers the following technical specifications:
| Feature | Specification |
|---|---|
| Product Name | ATK Z87 PRO three-mode mechanical keyboard |
| Model | ATK Z87 PRO |
| Keyboard Standard | 87 Keys |
| Keyboard Structure | GASKET |
| Internal Fill | PC positioning plate, PO sandwich cotton, IXPE shaft underpad, PET Acoustic Pad, IXPE Silencer Shaft Seat Cotton, Silicone Acoustic Base Pad |
| Keycap Height | MDA |
| Keycap Process | Five-sided thermal sublimation, Personalized PC Transparent Keycap |
| Shaft Seat | Kaihua axle seat |
| Lamp Bead Type | ARGB lamp beads |
| Lamp Position | Lower Light |
| Battery Capacity | 8000 mAh |
| Backlight | 16 million color |
| Connection Mode | Wired/Wireless 2.4G/Bluetooth 5.0 |
| Support | ATK HUB / SMART SPEED X |
| Interface Type | USB |
| Operation Style | Mechanical |
| Language | English |
| Application | Desktop, Laptop |
| Dimensions (L x W x H) | 362.7mm x 134.3mm x 40.1mm (including keycap height) |
Warranty and Support
Your ATK Z87 PRO keyboard comes with a Warranty Voucher. Please refer to this document for detailed warranty terms and conditions.
For product support, driver downloads, and additional services, please visit the official ATK website: ATK.PRO.
User Tips
- Battery Life: To maximize battery life in wireless modes, consider turning off RGB lighting when not needed.
- Customization: Explore the ATK HUB software thoroughly to unlock the full potential of your keyboard's lighting and performance settings.
- Keycap Compatibility: While the keyboard comes with specific keycaps, its standard layout and switch type often allow for compatibility with aftermarket keycap sets for further personalization.
- Gasket Mount Feel: The Gasket structure is designed to provide a softer, more cushioned typing feel and improved acoustics. Experiment with different keypresses to appreciate this unique characteristic.