VIPCOO VS9

Contents

VIPCOO VS9 High-Power Electric Scooter User Manual

Model: VS9

1. Important Safety Information

WARNING:

  • Please mind potential fire risk and strictly follow the instruction manual for charging and storage.
  • While using the product, please wear protective equipment (e.g., helmet, knee pads, elbow pads) and fully comply with all applicable local laws and regulations regarding electric scooter use.
  • Always perform a pre-ride check of your scooter, including brakes, tires, and battery level.

2. Package Contents

Upon unpacking your VIPCOO VS9 Electric Scooter, please ensure all components are present and in good condition. The package should include:

  • VIPCOO VS9 Electric Scooter
  • Toolkit for assembly and maintenance
  • Charger(s)
  • User Manual (this document)
Image showing the VIPCOO VS9 electric scooter with its included accessories: a toolkit, instructions manual, and two chargers.
Figure 2.1: Accessories Included (Toolkit, Instructions, Charger)

3. Setup and Initial Preparation

3.1 Unfolding the Scooter

The VIPCOO VS9 is designed for fast folding and easy transport. To unfold:

  1. Place the scooter on a flat, stable surface.
  2. Release the folding mechanism latch (refer to the diagram in the included instructions for exact location).
  3. Carefully raise the handlebar stem until it locks into place.
  4. Ensure all locking mechanisms are securely engaged before use.

3.2 Initial Charging

Before your first ride, fully charge the scooter's battery. The VIPCOO VS9 features dual charging ports for faster charging.

  1. Locate the charging ports on the scooter.
  2. Connect the charger(s) to the scooter's charging port(s).
  3. Plug the charger(s) into a standard power outlet.
  4. The charging indicator on the charger will show the charging status (typically red for charging, green for fully charged).
  5. Charging time is approximately 6-7 hours for a full charge.
  6. Disconnect the charger(s) once charging is complete.
Close-up image showing two charging cables connected to the dual charging ports of the electric scooter.
Figure 3.1: Dual Charging Ports

4. Operating Instructions

4.1 Controls and Display

Familiarize yourself with the handlebar controls and the LED display before riding.

  • LED Display: Shows critical information such as driving voltage, remaining power, current travel speed, selected gear (3rd gear), and current mileage.
  • Handlebar Controls: Includes buttons for lights, horn, power mode selection, and potentially other functions.
Image showing the LED display and handlebar controls of the VIPCOO VS9 scooter. The display shows 'Mode', 'km/h', 'Trip', and battery level. The controls include buttons for lights, horn, and mode selection.
Figure 4.1: Visualization of LED Functions and Handlebar Controls

4.2 Starting and Riding

  1. Ensure the scooter is powered on.
  2. Place one foot on the deck and push off with the other foot to gain initial momentum.
  3. Gently press the throttle to engage the motor.
  4. Maintain balance and steer using the handlebars.
  5. The scooter features dual 1800W motors for powerful performance and 11-inch off-road tires for various terrains.

4.3 Braking

The VIPCOO VS9 is equipped with front and rear hydraulic disc brakes with electronic braking for reliable stopping power.

  1. To slow down or stop, gently squeeze the brake levers on the handlebars.
  2. Apply both brakes simultaneously for optimal stopping performance and stability.
  3. Electronic braking assists in shortening stopping distances.
Image illustrating the front and rear hydraulic disc brakes with electronic braking on the VIPCOO VS9 scooter. Close-ups show the hydraulic brake lever, front disc brake, and rear disc brake.
Figure 4.2: Front and Rear Hydraulic Disc Brakes

4.4 Lighting System

The scooter features a full vehicle lighting system for safe night-time riding.

  • LED Headlights: Provide illumination for the path ahead.
  • Ambient Light: Enhances visibility and aesthetics.
  • Turn Signal and Tail Lights: For signaling turns and increasing rear visibility.
Image showing the VIPCOO VS9 scooter at night with its full lighting system active, including LED headlights, ambient light, and turn signal/tail lights.
Figure 4.3: Full Vehicle Lighting

4.5 Suspension System

The VIPCOO VS9 is equipped with front and rear dual hydraulic spring suspension, adapting to complex road surfaces and enhancing shock absorption for a comfortable ride.

Close-up image showing the front and rear dual hydraulic spring suspension system of the VIPCOO VS9 scooter, highlighting the shock absorbers.
Figure 4.4: Front and Rear Dual Hydraulic Spring Suspension

4.6 Folding the Scooter

To fold the scooter for storage or transport:

  1. Ensure the scooter is powered off.
  2. Locate and disengage the folding mechanism latch.
  3. Carefully fold the handlebar stem down until it locks into its folded position.
Image showing the VIPCOO VS9 electric scooter in its folded state, placed in the trunk of a car, demonstrating its compact size for transport.
Figure 4.5: Fast Folding Feature

4.7 Riding Demonstration Video

Video 4.1: Demonstration of the VIPCOO VS9 Electric Scooter in use, showcasing its performance on various terrains and its ability to ascend ramps.

5. Maintenance

5.1 Battery Care

  • Always use the original charger provided with the scooter.
  • Do not overcharge or completely drain the battery.
  • Store the scooter in a cool, dry place away from direct sunlight and extreme temperatures.
  • If storing for an extended period, ensure the battery is charged to approximately 50-70% and recharge every 1-2 months.
Image showing the internal structure of the high-capacity 60V/26AH Lithium-ion battery pack within the scooter's deck.
Figure 5.1: High-Capacity Lithium-ion Battery

5.2 General Maintenance

  • Regularly check tire pressure and inflate to the recommended levels.
  • Inspect brakes for wear and proper function. Adjust if necessary.
  • Keep the scooter clean and free from dirt and debris. Use a damp cloth for cleaning; avoid high-pressure water.
  • Periodically check all screws and fasteners for tightness.
  • Lubricate moving parts as recommended in the detailed instruction manual.

6. Troubleshooting

If you encounter issues with your VIPCOO VS9 scooter, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Scooter does not power onLow battery; Power button not pressed correctly; Loose connectionsCharge the battery; Press and hold the power button; Check all visible cable connections.
Motor not engagingThrottle issue; Brake engaged; Low batteryEnsure throttle is functioning; Release brake levers; Charge battery.
Reduced range/speedLow tire pressure; Overload; Battery degradationInflate tires to correct pressure; Reduce load; Consult support for battery check.
Brakes feel weakBrake pads worn; Cable tension incorrect; Hydraulic fluid lowInspect and replace brake pads; Adjust brake cable tension; Consult a professional for hydraulic system.

For more complex issues, please contact customer support.

7. Specifications

FeatureSpecification
ModelVIPCOO VS9
Motor Power3600W (Dual 1800W Motors)
Battery60V 26Ah Lithium-ion
Max RangeUp to 90 km
Charging Time6-7 hours (Fast Charging)
Max SpeedUp to 65 km/h
Max Climbing Angle37% slope
Tires11-inch Off-road Tyres
BrakesFront and Rear Hydraulic Disc Brakes with Electronic Braking
SuspensionFront and Rear Dual Hydraulic Spring Suspension
LightingLED Headlights, Ambient Light, Turn Signal and Tail Lights
DisplayLED (Driving voltage, Remaining power, Travel speed, 3rd gear, Current mileage)
FoldableYes
Net Weight45.7 KG (100 LBS)
Max Load Capacity150 KG (330 LBS)
Unfolded Dimensions (L x H x W)134 cm x 132 cm x 65 cm (52.8 in x 52 in x 25.6 in)
Folded Height60 cm (23.4 in)
Pedal Dimensions (L x W)56 cm x 22 cm (22 in x 8.7 in)
Diagram showing the dimensions of the VIPCOO VS9 electric scooter in both unfolded and folded states, along with its net weight and maximum load capacity.
Figure 7.1: VIPCOO VS9 Dimensions and Weight

8. User Tips

  • For optimal battery life and performance, avoid frequent full discharges and charges. Partial charges are generally better.
  • Always wear a helmet and appropriate safety gear, especially when riding at higher speeds or on uneven terrain.
  • Be aware of your surroundings and ride defensively, anticipating potential hazards.
  • Regularly check the tire pressure to ensure a smooth ride and prevent punctures.
  • When riding in wet conditions, reduce speed and be extra cautious as braking distances may increase.

9. Warranty and Support

The VIPCOO VS9 Electric Scooter comes with a one-year warranty. For warranty claims, technical support, or any questions not covered in this manual, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.