1. Introduction
The Junctek VTM100 is a versatile DC 7-100V battery capacity tester, voltage meter, and temperature indicator designed for precise monitoring of various battery types. It features a dual-screen dynamic display, intelligent safety protections, and multi-battery compatibility, making it suitable for a wide range of applications including electric vehicles, energy storage systems, industrial equipment, and electronics laboratories.
Front view of the Junctek VTM100 Battery Capacity Tester.
2. Package Contents
Please check the package for the following items:
- Main Unit (VTM100 Monitor) ×1
- User Manual ×1
- Red Wire ×1
- Black Wire ×1
- Temperature Sensor ×1 (optional, included with 'VTM100 with sensor' model)
Visual representation of the VTM100 package contents.
3. Specifications
| Category | Parameter |
|---|---|
| Model Number | VTM100 |
| Type | Vehicle Battery Tester |
| DIY Supplies | Electrical |
| Origin | Mainland China |
| Measurement Voltage Range | DC 7-100V |
| Display Accuracy (Voltage) | 0.1V |
| Display Accuracy (Capacity) | 1% |
| Compatible Battery Types |
|
| Temperature Range | 0-100℃ |
| Temperature Accuracy | ±1℃ |
| Opening Size | 100*55mm |
| Product Dimensions | 108*63*25mm |
Key parameters and specifications of the VTM100.
4. Installation
The VTM100 is designed for straightforward installation. It is a 2-wire meter, simplifying the connection process.
4.1 Wiring Connections
Connect the provided red and black wires to the DC7V-100V terminal on the back of the unit. The red wire is for the positive (+) terminal and the black wire for the negative (-) terminal of the battery or power source you wish to monitor.
If your model includes a temperature sensor, connect it to the T-SNS terminal.
Rear view of the VTM100, highlighting the DC7V-100V power input and T-SNS temperature sensor port.
4.2 Safety Features
The VTM100 includes hardware reverse polarity protection to prevent damage from incorrect wiring. Additionally, it features power-off memory, automatically saving parameters so there is no need to reset after a power cycle.
Diagram illustrating the dual security features: Hardware Reverse Polarity Protection and Power-off Memory.
5. Operation
The VTM100 features a dual-screen dynamic display and a four-key control system for easy interaction.
5.1 Display Overview
- Upper Screen: Displays real-time voltage with a three-digit LED display.
- Lower Screen: Displays battery capacity percentage or temperature (if sensor is connected) with a three-digit LED display. Supports auto screen-off in standby mode.
5.2 Four-Key Control
The device is controlled using four buttons: SET, OK, Up arrow (↑), and Down arrow (↓).
- SET Button:
- Short Press: Switches between different display functions or options within a menu.
- Press and Hold: Enters the system setup mode.
- OK Button: Used to confirm and save system settings.
- Up (↑) / Down (↓) Buttons:
- Used to switch between percentage (%) and Celsius (°C) display modes.
- Used to navigate and adjust values within settings options.
Diagram explaining the four-key control and three-color status indicators.
5.3 Three-Color Status Indicators
The VTM100 features three LED indicators to provide quick status updates:
- LBC (Low Battery Capacity): Yellow LED indicates a low capacity warning.
- OTW (Over-Temperature Warning): Red LED indicates an over-temperature condition.
- SET (System Settings): Blue LED indicates that the device is in system settings mode.
Explanation of the Yellow, Red, and Blue LED indicators.
6. Settings
To configure the VTM100, press and hold the SET button to enter the system setup interface. Within this mode, you can adjust various parameters to match your battery type and preferences.
6.1 Configurable Parameters
- Battery Type: Select the type of battery being monitored (Lead-acid, Ternary Lithium, or Lithium Iron Phosphate).
- Number of Cells: For multi-cell battery packs, specify the number of series cells.
- Screen-Off Switch: Enable or disable the automatic screen-off feature for power saving.
- Low Voltage Alarm Threshold: Customize the voltage level at which the Low Capacity Warning (LBC) indicator activates.
- Over-Temperature Alarm Threshold: Customize the temperature level at which the Over-Temperature Warning (OTW) indicator activates (requires optional temperature sensor).
Use the Up (↑) and Down (↓) buttons to navigate through options and adjust values. Press the OK button to confirm and save your changes before exiting the setup mode.
7. Alerts and Warnings
The VTM100 provides visual alerts to indicate critical battery conditions:
- LBC (Low Capacity Warning): The yellow LED illuminates when the battery voltage drops below the configured low voltage alarm threshold, indicating that the battery capacity is low.
- OTW (Over-Temperature Warning): The red LED illuminates when the measured temperature exceeds the configured over-temperature alarm threshold, indicating a potential overheating issue. This function requires the optional temperature sensor to be connected.
8. Troubleshooting
If you encounter issues with your VTM100, please refer to the following common problems and solutions:
- No Display:
- Check if the power wires (red and black) are correctly connected to the DC7V-100V terminal.
- Ensure the input voltage is within the DC 7-100V range.
- Verify that the power source is active.
- Incorrect Readings:
- Ensure the correct battery type and number of cells are configured in the settings.
- Check for loose connections that might affect voltage sensing.
- Temperature Not Displaying/Incorrect:
- Confirm that the temperature sensor is properly connected to the T-SNS terminal.
- Ensure your VTM100 model includes the temperature sensor.
- Alarms Not Functioning:
- Verify that the alarm thresholds (low voltage, over-temperature) are correctly set in the system settings.
- For over-temperature alarm, ensure the temperature sensor is connected and functioning.
If the problem persists, please consult the full user manual or contact customer support.
9. User Tips
- For optimal accuracy, ensure the VTM100 is installed in a location with stable temperature and away from direct heat sources.
- Regularly check wiring connections to prevent intermittent readings.
- Familiarize yourself with the button functions and settings menu to fully utilize the device's capabilities for different battery types.
10. Maintenance
- Cleaning: Use a soft, dry cloth to clean the display and casing. Do not use abrasive cleaners or solvents.
- Storage: When not in use for extended periods, store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically inspect the wiring for any signs of wear or damage.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the manufacturer/seller directly. Keep your purchase receipt as proof of purchase.