1. Product Overview
The UGREEN USB 3.2 20Gbps M.2 SSD Docking Station (Model CM392) is a high-performance, dual-bay solution designed for M.2 NVMe SSDs. It facilitates ultra-fast data transfer speeds of up to 20Gbps and supports one-click offline cloning without requiring a computer connection. This docking station is ideal for data backup, migration, and expanding storage capacity.
2. Package Contents
- UGREEN USB 3.2 20Gbps M.2 SSD Docking Station (CM392)
- USB-A to USB-C Data Cable (20Gbps compatible)
- 12V Power Supply (EU plug, adapter may be required for other regions)
- User Manual
3. Setup Guide
3.1. Compatibility
This docking station is designed exclusively for M.2 NVMe SSDs. It supports both M Key and M&B Key NVMe SSDs. SATA-based M.2 SSDs are NOT supported.
- Supported SSD Types: M Key NVMe, M&B Key NVMe
- Supported SSD Sizes: 2230, 2242, 2260, 2280, 22110
- Maximum Capacity: Up to 8TB per SSD, 16TB total
3.2. Connecting the Docking Station
- Insert SSDs: Gently insert your M.2 NVMe SSD(s) into the designated slots (Bay A and Bay B) on the docking station. Ensure they are seated firmly.
- Connect Power: Connect the provided 12V power supply to the docking station and then plug it into a power outlet. The 12V power supply ensures stable operation, especially during high-speed transfers and cloning.
- Connect to Host Device (for data transfer): Use the included USB-A to USB-C data cable to connect the docking station to your computer or compatible device. For optimal 20Gbps transfer speeds, ensure your host device has a USB 3.2 Gen 2x2 port.
4. Operating Instructions
4.1. Data Transfer Mode (Connected to Computer)
When connected to a computer, the docking station functions as an external dual-bay SSD enclosure. Both inserted NVMe SSDs will be recognized by your operating system (Mac OS, Windows, Linux) as separate drives.
- Plug & Play: No drivers are required for basic functionality.
- Ultra-fast Transfer: Achieve speeds up to 20Gbps with a USB 3.2 Gen 2x2 port on your host device. Note that Thunderbolt 3 and USB 4 interfaces will typically operate at 10Gbps with this device.
4.2. One-Click Offline Cloning
The docking station supports standalone cloning, meaning no computer connection is required for this operation.
- Insert Source SSD: Insert the SSD you wish to clone (Source Drive) into Bay A.
- Insert Target SSD: Insert the SSD you wish to clone to (Target Drive) into Bay B.
- Important: Ensure the capacity of the Target Drive (Bay B) is equal to or greater than the capacity of the Source Drive (Bay A). All data on the Target Drive will be overwritten during the cloning process. Please back up any important data on the Target Drive before proceeding.
- Initiate Cloning: Press and hold the cloning button (usually marked with a square icon) on the docking station for a few seconds until the indicator lights begin to flash.
- Monitor Progress: The indicator lights (25%, 50%, 75%, 100%) will illuminate sequentially to show the cloning progress.
- Completion: Once all indicator lights are solid, the cloning process is complete.
5. Maintenance
- Keep the docking station clean and free from dust. Use a soft, dry cloth for cleaning.
- Avoid exposing the device to extreme temperatures, humidity, or direct sunlight.
- Ensure proper ventilation around the device during operation.
- The docking station features an anti-slip mat on the bottom for stability. Ensure it is placed on a flat, stable surface.
6. Troubleshooting
- SSD Not Recognized:
- Ensure the SSD is correctly inserted and fully seated in the slot.
- Verify the SSD is an M.2 NVMe type (M Key or M&B Key). SATA M.2 SSDs are not compatible.
- Check if the power adapter is securely connected and providing power.
- If connected to a computer, try a different USB port or cable.
- For new SSDs, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (Mac OS) before use.
- Slow Transfer Speeds:
- Ensure your computer's USB port is USB 3.2 Gen 2x2 compatible for 20Gbps speeds. Other USB versions (e.g., USB 3.0/3.1 Gen 1, USB 3.1/3.2 Gen 2) will result in lower speeds. Thunderbolt 3/USB 4 ports will typically operate at 10Gbps.
- Verify the included 20Gbps data cable is being used.
- Check the performance of your SSDs; older or slower SSDs will limit transfer speeds.
- Offline Cloning Failure:
- Confirm that the Target Drive (Bay B) has a capacity equal to or greater than the Source Drive (Bay A).
- Ensure both SSDs are M.2 NVMe type and properly inserted.
- Make sure the power supply is stable during the entire cloning process.
- Do not disconnect the power or SSDs during cloning.
7. Specifications
| Feature | Specification |
|---|---|
| Model | CM392 |
| Brand | UGREEN |
| External Interface | USB 3.2 Gen 2x2 (USB-C) |
| Transfer Speed | Up to 20Gbps |
| Internal Interface | M.2 NVMe (M Key, M&B Key) |
| Supported SSD Sizes | 2230, 2242, 2260, 2280, 22110 |
| Max. SSD Capacity | Up to 8TB per bay, 16TB total |
| Chipset | JMS586U |
| Features | UASP, S.M.A.R.T., TRIM, One-Click Offline Clone |
| Case Material | Aluminum |
| Compatible Systems | Mac OS, Windows, Linux |
| Power Supply | 12V DC Adapter |
8. User Tips
- For optimal performance, always use the provided power adapter and data cable.
- When cloning, double-check that the source and target SSDs are in the correct bays (Source in A, Target in B) to prevent accidental data loss.
- If you experience any issues, try restarting your computer or power cycling the docking station.
- Keep the firmware of your SSDs updated for best compatibility and performance.
9. Warranty and Support
UGREEN products come with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please visit the official UGREEN website or contact their customer support directly. Please have your product model (CM392) and purchase information ready when contacting support.