JONSBO N6

Contents

JONSBO N6 MATX NAS Network Storage Server Chassis User Manual

Model: N6

JONSBO N6 NAS Chassis with internal components and hard drives

JONSBO N6 NAS Chassis, showcasing its compact design and internal storage capabilities.

1. Product Overview

The JONSBO N6 is the latest addition to the JONSBO NAS chassis series, designed for versatility. It functions not only as a Network Attached Storage (NAS) solution but also supports personal PC platforms, servers, and workstations. Its large storage capacity, compatibility with full-size graphics cards, and robust cooling system make it suitable for diverse computing needs.

The chassis features a MATX motherboard's upper and lower compartment structure, allowing for compatible and diverse configurations with a clear and concise internal layout. The aesthetic design is low-key and elegant, incorporating multiple mesh ventilation holes and a narrow wooden decorative panel on the front. A three-speed fan controller on the front panel allows users to adjust fan speeds based on real-time heat dissipation requirements. The N6 also includes dual power slots, catering to advanced DIY users.

Official product feature video for the JONSBO N6 NAS Chassis.

2. Specifications

Feature Detail
Product ModelN6
ColorBlack
Dimensions (W x D x H)305mm x 353mm x 318mm (includes 6mm tall base)
Material0.7mm + 1.0mm Steel
Drive Bays9 x 2.5" SSD / 9 x 3.5" HDD
Motherboard SupportITX / M-ATX
PCI Expansion Slots4
Front I/O Ports1 x USB 3.2 Gen2 Type-C, 1 x USB 3.0, 1 x Audio (Headset+Mic combined)
PSU SupportATX ≤ 220mm / SFX ≤ 100mm (supports dual power mode)
Max. CPU Cooler Height≤ 65mm - 160mm
Max. Display Card Length≤ 275mm - 320mm (305mm with 25mm thick front fan, 275mm with water cooling)
Cooling System (Fans)Front: 2 x 120mm or 2 x 140mm; Rear: 1 x 120mm; Left: 2 x 120mm; Right: 2 x 120mm; Drive Bay: 2 x 120mm (standard)
Radiator SupportFront panel supports 240mm water cooling
Fan Speed Controller3-port/3-speed (standard)
Case WeightNet 7.5kg
Dust FiltersTop, Bottom
RGB SupportNo RGB

Note: This product does not include hard drives or other hardware, but includes two fans.

Chassis dimensions diagram

Diagram showing the overall dimensions of the JONSBO N6 chassis.

3. Setup Instructions

3.1. Parts List

Before beginning assembly, verify all components are present:

Item Description Quantity
AScrews (Motherboard, Power Supply, Power Supply Bracket)20
B3.5" HDD Screws37
C2.5" SSD Hard Drive Screws37
DFan Screws12
EStandoff1
FHEX Wrench Socket1
GGasket10
HCable Tie5
IPower Adapter Cable1
JPower Adapter Screw3
KSpare Plastic Buckle1
LSpare Screws for Plastic Buckles2
MRear Fan Bracket1
NLower Power Supply Rack1
OFront Power Rack1

3.2. Removing Covers

  1. Remove the Top Cover:

    Unscrew the top cover screws. Push the top cover back to remove it.

    Diagram showing how to remove the top cover

    Illustration of removing the top cover by unscrewing and sliding it back.

  2. Remove the Front Panel:

    Locate the opening notch on the top of the front mesh plate and open the front mesh plate from this notch. There are also opening notches on both sides of the plastic panel; open the panel from these notches.

    Diagram showing how to remove the front panel

    Diagram illustrating the removal of the front panel by detaching it from the notches.

3.3. Motherboard Installation

Place the ITX/M-ATX motherboard into the designated area within the chassis and secure it with screws (Item A).

Diagram showing motherboard installation

Visual guide for installing the motherboard into the chassis.

3.4. Power Supply Installation

The N6 supports various power supply configurations:

  1. Upper Power Mode (ATX/SFX PSU):

    For ATX PSUs, CPU heatsink height support is ≤ 65mm. For SFX PSUs, CPU heatsink height support is ≤ 75mm. This mode comes with a power support bracket to ensure stable operation.

    Diagram for upper power mode installation

    Diagram showing the installation of ATX and SFX power supplies in the upper compartment.

  2. Lower Power Mode (SFX PSU):

    Use the included rear window fan bracket to block the upper power supply position. Use the included bottom-mounted power bracket to install an SFX power supply. The original rear window 12cm fan can be moved to the upper compartment for installation. This mode supports a CPU heatsink height of ≤ 160mm.

    Diagram for lower power mode installation

    Illustration of SFX power supply installation in the lower compartment.

  3. Front Power Mode (SFX PSU):

    Use the included rear window fan bracket to block the upper power supply position. Install the internal power adapter cable. Use the included SFX power bracket to achieve front installation of the SFX power supply. This mode supports a CPU heatsink height of ≤ 160mm.

    Diagram for front power mode installation

    Diagram showing SFX power supply installation in the front position.

  4. Dual Power Mode:

    Dual power installation can be achieved using the included power bracket. This supports independent power supply for hard drive compartments to ensure stable operation of multiple hard drives. A dual power synchronous starting cable/starter needs to be purchased separately.

    Diagram for dual power mode installation

    Illustration of dual power supply configuration with ATX and SFX PSUs.

3.5. Power Supply Bracket Adjustment

The power supply bracket is fixed on the right side. Adjust the bracket distance to properly support the power supply.

Diagram showing power supply bracket adjustment

Visual guide for adjusting the power supply bracket.

3.6. Cable Organization

Arrange the CPU power supply and hard disk power supply cables in the holes of area A. Organize the fan cable and hard drive data cable in the holes in area B.

3.7. Graphics Card Installation

Insert the graphics card into the motherboard slot and secure it with screws. The chassis supports graphics cards up to 320mm in length. If a 25mm thick fan is installed on the front panel, the maximum GPU length is 305mm. With water cooling, the maximum GPU length is 275mm.

Diagram showing graphics card installation and length limits

Diagram illustrating graphics card installation and various length considerations.

3.8. Hard Disk Backplane Power Supply Connection

Unscrew the four screws on the fan bracket and remove the fan bracket. Plug in the power supply to the hard disk backplane as shown in the diagram.

Power Supply Precaution:

  • It is recommended to fully plug in all four power supply heads.
  • Connect a single power cord to only one power supply port.
  • Connecting multiple power plugs on a single power line is not allowed.
  • Insufficient current may cause the hard drive to fail to start.
Diagram showing hard disk backplane power connection

Detailed view of SATA power supply heads and PATA D-type power plugs on the hard drive backplane.

3.9. Fan Installation

The chassis supports various fan configurations for optimal cooling:

  • Front panel: 2 x 120mm or 2 x 140mm fans (supports 240mm radiator)
  • Left side: 2 x 120mm fans
  • Right side: 2 x 120mm fans
  • Rear: 1 x 120mm fan
  • Bottom: 2 x 12025 double ball fans (standard) for auxiliary hard disk cooling.
Diagram showing fan positions and heat dissipation support

Diagram illustrating fan placement options within the motherboard compartment for heat dissipation.

Diagram showing standard bottom fans

Illustration of the standard bottom-mounted 12025 fans for hard disk cooling.

3.10. Hard Drive Installation

Remove the hard drive bracket and tighten the screws according to the markings on the hard drive. Install the assembled hard drive cage back into the chassis.

Diagram showing 9-bit 3.5-inch hard drive support

Diagram illustrating the installation of 9 x 3.5-inch hard drives with hot-plugging support.

Product details showing walnut veneer and new metal hard drive bracket

Close-up of the new metal hard drive bracket with reserved handle for easier installation.

3.11. Installing Covers

Reinstall the top cover and the fan bracket after all internal components are installed.

4. Operating Instructions

4.1. Front Panel Controls

The front panel provides convenient access to essential controls and ports:

  • Fan Speed Control Switch: A 3-speed switch allows for free and quick adjustment of fan speed to manage heat dissipation.
  • USB 3.2 Gen2 Type-C Port: Provides high-speed data transmission at 10Gbps.
  • USB 3.0 Port: Offers standard USB 3.0 data transmission at 5Gbps.
  • Audio Port: A combined 2-in-1 port for headset and microphone.
Close-up of the front panel fan speed regulator

Close-up view of the fan speed control switch and front I/O ports.

5. Maintenance

5.1. Dust Filters

The chassis is equipped with dust filters on the top and bottom to prevent dust accumulation. Regularly clean these filters to maintain optimal airflow and cooling performance.

5.2. Hard Drive Ventilation

Ensure proper spacing for hard drives. Hard drives should maintain at least a 5mm gap, adjusted according to their thickness, to enhance ventilation efficiency and ensure a long service life.

New space design for hard drive heat dissipation

Diagram illustrating the recommended spacing for hard drives to ensure proper heat dissipation.

5.3. General Cleaning

Use a soft, dry cloth to clean the exterior of the chassis. For internal cleaning, use compressed air to remove dust from fans and components. Always power off and unplug the chassis before cleaning.

6. Troubleshooting

6.1. Hard Drive Not Starting

If a hard drive fails to start, check the power supply connections:

  • Ensure all four power supply heads are fully plugged in.
  • Verify that only one power cord is connected to a single power supply port on the hard drive backplane. Connecting multiple power plugs on a single power line is not allowed and can lead to insufficient current.
  • Insufficient current is a common cause for hard drives failing to start. Refer to the parameters of each brand for the actual power/hard drive requirements.

7. User Tips

  • Cable Management: Utilize the provided cable ties and routing options to ensure clean cable management. This improves airflow and makes future maintenance easier.
  • Power Supply Selection: When using dual power supplies, ensure compatibility and consider purchasing a dual power synchronous starting cable/starter for seamless operation.
  • Cooling Optimization: Experiment with the 3-speed fan controller to find the optimal balance between cooling performance and noise levels for your specific hardware configuration.
  • Hot-Swappable Drives: Take advantage of the server-grade hot-swappable backplane for easy data exchange and maintenance of your 3.5-inch hard drives.

8. Warranty and Support

For detailed warranty information and further support, please refer to the official user manual PDF. This document contains comprehensive information regarding product guarantees and service terms.

You can access the full user manual (PDF) here.

For technical assistance or inquiries, please contact Dongguan Sibositong Industrial Co., Ltd. at No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 523651, China.

JONSBO N6 NAS Case User Guide cover

Cover of the JONSBO N6 NAS Case User Guide.

© 2023 JONSBO. All rights reserved. Specifications are subject to change without prior notice.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.