1. Introduction
This manual provides detailed instructions for the safe and efficient operation, installation, maintenance, and troubleshooting of your Sunster 8KW Smart Fuel Saving Diesel Parking Heater. Please read this manual thoroughly before using the product and keep it for future reference.
The Sunster 8KW Diesel Parking Heater is designed to provide warmth for various applications including cars, RVs, trucks, yachts, motorhomes, houses, garages, stores, and tents. It features smart fuel-saving technology, low noise operation, and multiple safety protections.
2. Safety Information
Your safety is paramount. Please observe the following safety guidelines:
- Always ensure the heater is placed on a stable, non-combustible surface.
- Ensure adequate ventilation when operating the heater. The exhaust must be vented externally to prevent carbon monoxide buildup.
- Do not block the air intake or hot air outlet. Maintain clear space around the heater for proper airflow.
- Keep flammable materials away from the heater.
- Do not operate the heater in enclosed spaces without proper exhaust ventilation.
- Professional installation is highly recommended to ensure correct setup and safe operation.
- The product features built-in protection against overheating (536°F/280°C), short circuit, overcurrent, overvoltage, and reverse connection. However, always ensure correct wiring and power supply.
- Do not attempt to repair or modify the heater yourself. Contact qualified service personnel for any repairs.
3. Package Contents
Please check the package contents upon receipt to ensure all items are present and undamaged:
- 1 x Air Heater Host
- 1 x 5L Fuel Tank
- 1 x Remote Control
- 1 x Air Filter
- 1 x Fixed Plate
- 1 x Air Outlet Cord
- 1 x Intake Pipe
- 1 x Exhaust Pipe
- 1 x Battery Power Cord
- 1 x Fixture Accessories Set
- 1 x Silencer
- 1 x User Manual (PDF available online)
4. Product Overview
Familiarize yourself with the components of your diesel parking heater:
- Hot Air Outlet
- Smart LCD switch
- Leak-proof fuel tank cap
- 5L fuel tank
- Carrying handle
- Air Inlet
- Power input interface
- Exhaust outlet
Watch a brief product showcase video:
5. Setup and Installation
The heater comes with a 140mm base bracket for easier installation and to prevent exhaust gas blockages. Professional installation is recommended to ensure proper setup and safe operation, especially regarding exhaust venting.
5.1 Initial Fuel Pump Operation (泵油模式)
Before first use or after running out of fuel, you may need to prime the fuel pump:
- Ensure the heater is powered on and has completed its initial self-check, displaying the version number.
- Long press the [Confirm/Fuel Pump button] until a '300s' countdown appears on the screen.
- Release the button. The pump will operate for 300 seconds.
- To stop pumping before the countdown finishes, press the [Power button].
6. Operating Instructions
The heater can be controlled via the integrated LCD panel or the remote control.
6.1 Power On/Off
- To Power On: In the OFF state, press the [Power button] on the LCD panel.
- To Power Off: In the ON state, press the [Power button] on the LCD panel.
6.2 Work Modes
The heater supports two main work modes:
- Gear Mode: Adjustable from 1 to 10 gears.
- Temperature Control Mode: Adjustable from 8°C to 36°C (46.4°F to 96.8°F). The heater intelligently adjusts its operation to reach and maintain the set temperature.
To Switch Modes: While the heater is running, press the [Setting button] on the LCD panel to toggle between Gear Mode and Temperature Control Mode.
6.3 Adjusting Settings (Gear/Temperature)
- Press the [Up button] to increase the gear level or temperature (+1).
- Press the [Down button] to decrease the gear level or temperature (-1).
6.4 Basic Settings
To access basic settings, ensure the heater is powered ON, then long press the [Setting button] for 3 seconds.
- Item 1: Current Time Setting. Use [Up/Down buttons] to adjust, [Setting button] to confirm and move to the next digit/item.
- Item 2: Auto-Start Time Setting. (Similar adjustment as Item 1).
- Item 3: Auto-Start Run Time Setting. Adjustable in 0.5-hour increments. (Similar adjustment).
- Item 4: Auto-Start ON/OFF. When ON, the alarm clock icon will be displayed on the screen.
After adjusting all desired settings, long press the [Setting button] for 3 seconds to save all basic settings and return to the operating interface.
6.5 Remote Control Pairing (遥控匹配)
To pair the remote control with the heater:
- While the heater is powered ON, press the [Up button] on the LCD panel.
- The screen will display