EISSLOLY Smart TV LED Backlight with Camera

1. Product Overview

The EISSLOLY Smart TV LED Backlight with Camera enhances your viewing experience by synchronizing ambient lighting with the colors displayed on your TV screen and the rhythm of your music. Designed for 40-85 inch TVs and monitors, this system uses a high-definition camera to capture screen colors and an LED strip to project corresponding lighting onto your wall, creating an immersive atmosphere for game rooms, bedrooms, and living rooms.

Figure 1: Product components and typical setup.

Figure 2: Key features of the EISSLOLY Smart TV LED Backlight.

2. Package Contents

• LED Light Strip (available in 3.8m or 5m lengths)
• High-Definition Camera Unit
• 2.4G Wireless Remote Control
• USB Power Cable
• Mounting Clips/Adhesive (pre-applied or included)
• User Manual (this document)

3. Setup Instructions

1. Prepare Your TV:

   Ensure your TV or monitor is clean and dry on the back surface where the LED strip will be applied. The product is suitable for 40-85 inch displays.

2. Attach the LED Strip:

   Carefully peel off the adhesive backing from the LED strip. Starting from one corner, firmly press the strip along the edges of the back of your TV. Ensure the strip is evenly distributed and secured. The strip is not waterproof, so avoid exposure to moisture.

3. Mount the Camera:

   The camera unit measures approximately 15.5cm (6.1in) in height and 10cm (3.94in) in width. Mount the high-definition camera unit centrally on the top edge of your TV screen. Ensure the camera lens has a clear, unobstructed view of the entire screen. The camera is crucial for accurate color detection.

   

   Figure 3: Camera unit dimensions.

4. Connect Power:

   Connect the USB power cable to the LED strip and then to a 5V USB power source (e.g., a TV USB port or a USB wall adapter). Ensure the power source can provide sufficient current for the LED strip (21-30W).

5. Initial Calibration (Auto Screen Size Detection):

   The system features auto screen size detection. Once powered on, the camera will automatically calibrate to your TV's screen size and aspect ratio to ensure accurate color capturing across the full screen. This process helps to avoid issues like 'TV black bar awkwardness' and ensures seamless hue filling.

   

   Figure 4: Auto Color Filling feature.

4. Operating Instructions

Using the Remote Control:

The system is controlled via a 2.4G wireless remote control. Point the remote directly at the camera unit for optimal response.

Figure 5: Remote control included with the system.

• ON/OFF: Power the LED backlight on or off.
• MODE+/-: Cycle through different lighting modes (e.g., screen synchronization, music synchronization, static colors, dynamic effects).
• SPEED+/-: Adjust the speed of dynamic lighting effects.
• COLOR (R, G, B, W, AUTO): Select specific static colors (Red, Green, Blue, White) or activate the automatic color-capturing mode.
• TV1/TV2/TV3: These buttons may correspond to preset lighting scenes or input modes, depending on the specific model.
• Timer (30min, 60min, 6H): Set a timer for the backlight to automatically turn off.
• Music Sync: Activate the music synchronization mode, where lights react to audio.

Screen Color Synchronization:

The built-in high-definition camera continuously monitors the colors on your TV screen. With 18 color sampling points, it captures every detail and adjusts the LED backlight in real-time to match the on-screen content. This provides a super-smooth, ultra-colorful, and immersive light experience.

Figure 6: Accurate color synchronization.

Figure 7: Superior color sampling coverage.

5. Maintenance

• Cleaning: Gently wipe the LED strip and camera lens with a soft, dry cloth to remove dust. Do not use liquid cleaners directly on the components.
• Adhesion: If the LED strip begins to peel, re-secure it with additional adhesive clips or tape suitable for electronics.
• Storage: If storing the unit for an extended period, ensure it is kept in a dry, cool place away from direct sunlight.

6. Troubleshooting

• Lights not turning on:
  • Check if the USB power cable is securely connected to both the LED strip and a working 5V USB power source.
  • Ensure the power source provides adequate wattage (21-30W).
  • Verify the remote control batteries are functional and correctly inserted.
• Colors not syncing correctly:
  • Ensure the camera is mounted centrally on top of the TV and has a clear, unobstructed view of the entire screen.
  • Check for strong external light sources that might interfere with the camera's color detection.
  • Make sure the 'AUTO' color mode is selected on the remote control.
  • Clean the camera lens if it appears dirty.
• Remote control not responding:
  • Replace the remote control batteries.
  • Ensure there is no obstruction between the remote and the camera unit.

7. Specifications

8. User Tips

• For the best immersive experience, ensure your TV is placed against a plain, light-colored wall.
• Experiment with different lighting modes to find what best suits your content, whether it's movies, games, or music.
• Keep the camera lens clean to maintain optimal color detection accuracy.
• Avoid placing the TV in direct sunlight or under strong overhead lights that could cast reflections or interfere with the camera's view of the screen.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller directly through your purchase platform. Ensure you have your order details readily available when contacting support.