Allsome BG-516809+BG-6350

Contents

Instruction Manual

Allsome BG-516809 Benchtop Drill Press and BG-6350 Multifunction Worktable

Model: BG-516809+BG-6350

Introduction

This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your Allsome BG-516809 Benchtop Drill Press and BG-6350 Multifunction Worktable. Please read this manual thoroughly before operating the equipment to ensure proper use and to prevent injury or damage.

Allsome Benchtop Drill Press with Multifunction Worktable
Figure 1: Allsome Benchtop Drill Press with Multifunction Worktable. Max drilling depth shown as 15cm/5.91in.

Package Contents

Verify that all items listed below are included in your package:

  • 1 x BG-516809 Mini Bench Drill
  • 1 x BG-6350 Mini Multifunctional Worktable

Note: Please allow for minor measurement errors due to manual measurement. Product color may vary slightly from images due to display differences.

Safety Information

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury when using this power tool.

  • Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and gloves.
  • Ensure the work area is clean, well-lit, and free from obstructions.
  • Keep children and bystanders away from the operating area.
  • Securely fasten the workpiece to the worktable using clamps or the vise.
  • Never operate the drill press with damaged parts or if it is not functioning correctly.
  • Disconnect power before making adjustments, changing accessories, or performing maintenance.
  • Do not force the tool; let the drill bit do the work.
  • Ensure the power source matches the specifications of the tool.

Product Overview and Components

Familiarize yourself with the main parts of your drill press and worktable.

BG-516809 Benchtop Drill Press

Labeled components of the Allsome Benchtop Drill Press
Figure 2: Key components of the BG-516809 Benchtop Drill Press.
  • Digital Display: Shows current speed (RPM).
  • Screen Switch & Speed Adjustment Buttons: Controls power and adjusts drilling speed.
  • Laser Switch: Activates the laser crosshairs for precise positioning.
  • Lighting Switch: Turns on the integrated work light.
  • 1.5-13mm Drill Chuck: Holds various drill bit sizes.
  • Operation Handle: Lowers and raises the drill chuck.
  • Lifting Device: Mechanism for adjusting the machine head height.
  • Scale: Provides measurements for head height and rocker travel.
  • Bold Column: Sturdy support for the drill head.
  • Cast Iron Base: Provides stability and mounting points.

BG-6350 Multifunction Worktable

Various views of the BG-6350 Multifunction Worktable
Figure 3: Multiple views of the BG-6350 Multifunction Worktable.

The BG-6350 worktable features X-Y axis movement for precise positioning of your workpiece, essential for accurate drilling and milling tasks. It includes T-slots for clamping and a robust construction for stability.

Setup

  1. Unpacking: Carefully remove all components from the packaging. Inspect for any shipping damage.
  2. Assembly: Attach the BG-6350 Multifunction Worktable to the base of the BG-516809 Benchtop Drill Press. Ensure all fasteners are tightened securely.
  3. Mounting: For optimal stability and safety, it is recommended to bolt the entire assembly to a sturdy workbench using the screw fixing holes in the cast iron base.
  4. Power Connection: Connect the drill press to a standard AC power outlet (220V-230V/50Hz). Ensure the power switch is in the 'OFF' position before plugging in.
  5. Install Drill Bit: Open the 1.5-13mm drill chuck using the chuck key. Insert the desired drill bit and tighten the chuck securely. Remove the chuck key before operation.

Operating Instructions

  1. Power On: Press the Screen Switch to turn on the drill press. The digital display will illuminate.
  2. Adjusting Speed: Use the Speed Adjustment Buttons (up/down arrows) to set the desired RPM. The digital display will show the current speed. The no-load speed ranges from 0-2500r/min.
  3. Adjusting Head Height:
    Instructions for adjusting drill press head height
    Figure 4: Head height adjustment mechanism. The machine head can move up and down 60mm.
    • Loosen the head screw (labeled ① in Figure 4).
    • Turn the lifter to adjust the height of the machine head (labeled ② in Figure 4). The head can move up and down by 60mm.
    • Once the desired height is reached, securely tighten the head screw.
  4. Workpiece Positioning with Worktable:
    • Place your workpiece on the BG-6350 Multifunction Worktable.
    • Use appropriate clamps or a drill vise (not included) to secure the workpiece firmly to the worktable.
    • Use the handwheels on the worktable to precisely move the workpiece along the X and Y axes to align the drilling point with the drill bit.
  5. Laser Positioning:
    Laser precise positioning feature
    Figure 5: Laser precise positioning for accurate drilling.

    Press the Laser Switch to activate the laser crosshairs. Align the laser crosshairs with your marked drilling point on the workpiece for enhanced accuracy.

  6. Drilling: Once the workpiece is secured and positioned, slowly lower the drill bit into the workpiece using the Operation Handle. Apply steady, even pressure. Do not force the drill.
  7. Lighting: Press the Lighting Switch to illuminate your work area for better visibility.
  8. Power Off: After completing your task, raise the drill bit, turn off the Laser Switch and Lighting Switch, then press the Screen Switch to power off the drill press. Unplug the tool from the power outlet.

Maintenance

  • Cleaning: Regularly clean the drill press and worktable to remove dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
  • Lubrication: Periodically apply a light machine oil to moving parts, such as the column, lifting device, and worktable slides, to ensure smooth operation.
  • Chuck Maintenance: Keep the drill chuck clean and free of debris. If the chuck becomes stiff, clean it and apply a small amount of lubricant.
  • Inspection: Before each use, inspect the power cord for damage. Check all screws and fasteners for tightness.
  • Storage: Store the drill press in a clean, dry place, away from moisture and extreme temperatures.

Troubleshooting

Problem Possible Cause Solution
Drill press does not power on. No power supply; power cord damaged; switch faulty. Check power outlet and cord. Ensure switch is pressed. If problem persists, contact support.
Drill bit not rotating. Speed set to 0; motor issue. Increase speed using adjustment buttons. If motor is faulty, contact support.
Inaccurate drilling. Workpiece not secured; drill bit loose; worktable not stable. Secure workpiece firmly. Tighten drill chuck. Ensure worktable is properly assembled and mounted.
Machine head difficult to adjust. Head screw too tight; lack of lubrication. Loosen head screw. Apply light machine oil to the column and lifting mechanism.

Specifications

BG-516809 Mini Bench Drill

Product parameters and dimensions of the drill press
Figure 6: Product parameters and overall dimensions of the BG-516809 Mini Bench Drill.
Feature Specification
Product Voltage 220V-230V/50Hz
Clamping Diameter 1.5-13mm
No-load Speed 0-2500r/min
Product Power 400W
Product Weight 12.5kg
Max Drilling Depth 15cm / 5.91in
Head Vertical Travel 60mm
Column Diameter 45mm
Motor Type Brushless
DIY Supplies Metalworking

BG-6350 Mini Multifunctional Worktable

Dimensions of the BG-6350 Multifunction Worktable
Figure 7: Dimensions of the BG-6350 Multifunction Worktable.
Feature Specification
Length 350mm / 13.78in
Width 100mm / 3.94in
Height 122mm / 4.8in
Slot Width 30mm / 1.18in
Installation Center Hole 105mm / 4.13in

User Tips

  • Start Slow: When drilling, especially into harder materials, start with a slower speed and gradually increase as needed.
  • Coolant Use: For metal drilling, consider using a cutting fluid or coolant to extend drill bit life and improve cut quality.
  • Test Cuts: Always perform a test cut on scrap material before drilling your final workpiece to verify settings and alignment.
  • Cleanliness: Keep the worktable and T-slots clean to ensure smooth movement and accurate clamping.
  • Bit Sharpness: Use sharp drill bits. Dull bits can cause overheating, poor cuts, and strain on the motor.

Warranty and Support

For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Allsome Spain Store
Store ID: 1103601188
Opened: March 6, 2024

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.