1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your new Hiwheel Complete Rear Drive Wheel Assembly. This product is designed as a direct replacement part for the Xiaomi Mi Electric Scooter 5 Max, featuring a pre-installed motor and a 60/70-6.5 tubeless tire. Please read this manual thoroughly before attempting any installation or maintenance to ensure safe and correct usage.
2. Product Specifications
| Feature | Specification |
|---|---|
| Product Category | Scooter accessories |
| Brand Name | hiwheel |
| Origin | Mainland China |
| Compatibility | Xiaomi Mi Electric Scooter 5 Max (with Far Star 60/70-6.5 vacuum tire) |
| Net Weight | 4.06 kg |
| Wheel Diameter | 257 mm |
| Wheel Width | 148 mm |
| Tire Width | 59 mm |
| Tire Type | 60/70-6.5 Tubeless |
| Motor Cable Length | 43 cm |


3. Package Contents
Your package should contain the following item:
- 1 x Complete Rear Drive Wheel Assembly for Xiaomi Mi Electric Scooter 5 Max (includes pre-installed motor and 60/70-6.5 tubeless tire)

4. Safety Information
Always prioritize safety when working with electric scooters and their components. Failure to follow these safety guidelines may result in injury or damage to the product or scooter.
- Professional Installation Recommended: Due to the electrical and mechanical nature of this component, professional installation by a qualified technician is highly recommended.
- Disconnect Power: Always ensure the scooter's power is completely off and the battery is disconnected before beginning any installation or maintenance.
- Wear Safety Gear: Use appropriate personal protective equipment (PPE) such as gloves and eye protection.
- Proper Tools: Use only the correct tools for the job to prevent damage to fasteners and components.
- Torque Specifications: If available, adhere to the manufacturer's torque specifications for all fasteners. Overtightening or undertightening can lead to component failure.
- Electrical Connections: Ensure all electrical connections are clean, secure, and correctly matched. Incorrect wiring can cause electrical shorts or motor malfunction.
- Tire Pressure: Maintain correct tire pressure as specified by the scooter manufacturer to ensure optimal performance and safety.
5. Setup and Installation
This section outlines the general steps for replacing the rear drive wheel assembly. Specific steps may vary slightly depending on your scooter's exact model and year. Refer to your scooter's original service manual for detailed instructions if available.
5.1 Pre-Installation Checks
- Ensure the scooter is turned off and the battery is disconnected.
- Gather all necessary tools (e.g., wrenches, screwdrivers, tire levers if needed for other tasks).
- Inspect the new wheel assembly for any visible damage from shipping.
5.2 Removal of Old Wheel
- Carefully place the scooter on a stable surface, ensuring it cannot tip over.
- Locate and disconnect the motor's electrical wiring harness from the scooter's controller. Note the orientation and connection points.
- Loosen and remove the axle nuts and any other fasteners securing the old rear wheel to the scooter frame.
- Carefully remove the old wheel assembly, ensuring not to damage any remaining cables or components.
5.3 Installation of New Wheel
- Position the new rear drive wheel assembly into the scooter's swingarm/frame. Ensure proper alignment with the brake caliper (if applicable) and any other mounting points.
- Insert the axle through the frame and the wheel hub.
- Secure the axle with the washers and nuts. Tighten to the manufacturer's specified torque.
- Connect the motor's electrical wiring harness to the scooter's controller. Match the connectors carefully (refer to Figure 2.2 for wiring harness detail). Ensure all connections are firm and secure.
- Route the motor cable safely, ensuring it does not interfere with moving parts or get pinched.
5.4 Post-Installation Checks
- Reconnect the scooter battery.
- Turn on the scooter and perform a functional test.
- Spin the wheel manually to ensure it rotates freely without obstruction.
- Check brake functionality.
- Verify tire pressure is within the recommended range for your scooter model.
6. Operating Instructions
Once the new rear drive wheel assembly is correctly installed and all post-installation checks are complete, the scooter should operate as normal. The motor and tire are integrated components designed to function seamlessly with your Xiaomi Mi Electric Scooter 5 Max.
- Initial Test Ride: Perform a cautious test ride in a safe, open area at low speeds to confirm proper function of the motor, wheel, and brakes.
- Listen for Unusual Noises: Pay attention to any new or unusual sounds coming from the rear wheel area.
- Check for Vibrations: Ensure there are no excessive vibrations during operation.
7. Maintenance
Regular maintenance will extend the lifespan of your rear drive wheel assembly and ensure safe operation.
- Tire Pressure: Check tire pressure weekly and inflate to the scooter manufacturer's recommended PSI.
- Tire Inspection: Regularly inspect the 60/70-6.5 tubeless tire for signs of wear, cuts, punctures, or embedded debris. Replace the tire if wear indicators are visible or damage is significant.
- Motor Connections: Periodically check the motor's electrical connections and wiring harness for any signs of wear, corrosion, or looseness. Ensure they remain securely connected.
- Cleaning: Keep the wheel and motor area clean from dirt, mud, and debris. Use a damp cloth; avoid high-pressure washing directly on the motor or electrical components.
- Fastener Check: Occasionally check the axle nuts and other mounting fasteners to ensure they are still tight.

8. Troubleshooting
This section addresses common issues you might encounter with the rear drive wheel assembly.
| Problem | Possible Cause | Solution |
|---|---|---|
| Scooter not moving or loss of power from rear wheel | Loose or disconnected motor wiring Faulty motor controller (scooter side) Motor damage | Check all motor electrical connections for security. Consult a professional for scooter controller diagnosis. If motor is damaged, replacement may be necessary. |
| Unusual noises or grinding from rear wheel | Loose fasteners Foreign object lodged in wheel/motor area Bearing issue | Check and tighten all mounting fasteners. Inspect for and remove any debris. If bearings are faulty, professional service is recommended. |
| Tire losing air or flat | Puncture Valve stem issue Improper bead seal | Inspect tire for punctures and repair or replace as needed. Check valve stem for leaks. Ensure tire bead is properly seated on the rim. |
9. User Tips
- Verify Compatibility: Before installation, double-check that this rear drive wheel assembly is indeed compatible with your specific Xiaomi Mi Electric Scooter 5 Max model. While designed for this model, slight variations can occur.
- Cable Management: When installing, pay close attention to how the motor cable is routed. Improper routing can lead to chafing, pinching, or entanglement, which can damage the cable or affect scooter operation.
- Initial Tire Inflation: Although the tire comes pre-installed, always check and adjust the tire pressure to the recommended PSI for your scooter before the first ride.
10. Warranty and Support
For any questions regarding the product, installation, or potential issues, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.