MCHOSE V9 Pro

Contents

MCHOSE V9 Pro Wireless Gaming Headset User Manual

Model: V9 Pro

1. Introduction

Thank you for choosing the MCHOSE V9 Pro Wireless Gaming Headset. This manual provides detailed instructions on how to set up, operate, and maintain your headset to ensure optimal performance. Please read this manual carefully before use.

Note: The images in this manual are for illustration purposes only and may differ slightly from the actual product. Please refer to the actual product.

2. Package Contents

Please check the box for the following items:

  • MCHOSE V9 Pro Headset
  • User Manual
  • Handy Card
  • USB-C Charging Cable
  • 2.4GHz Wireless Receiver (USB-A & Type-C)
  • Foam Windscreen (pre-installed on microphone)
MCHOSE V9 Pro Headset and accessories
Figure 2.1: Package Contents (Headset, User Manual, Handy Card, USB-C Cable, 2.4GHz Receiver, Foam Windscreen)

3. Product Overview & Controls

Familiarize yourself with the headset's controls and indicators:

Diagram of MCHOSE V9 Pro headset controls
Figure 3.1: Headset Controls and Functions

3.1. Indicator Lights

  • Bluetooth (BT) Waiting for Connection: Red and blue lights flash alternately.
  • 2.4G Waiting for Connection: Red and green lights flash alternately.
  • Charging: Red light stays on.
  • Fully Charged: Blue light stays on.
  • 2.4G Connected: Green light slowly flashes once every 1.5 seconds.
  • BT Connected: Blue light slowly flashes once every 1.5 seconds.
  • Low Battery: Red indicator light slowly flashes.

3.2. Power Button

  • Power On/Off: Long press for about 3 seconds.
  • Connection Mode Switch: Double-click (cycles between 2.4G, Bluetooth, and Wired/Sound Card modes).
  • Game/Music Mode Switch: Triple-click.
  • Play/Pause: Single click.
  • Answer/End Call: Single click.
  • Reject Call: Long press for about 1.5 seconds.

3.3. Microphone Button

  • Microphone On/Off: Single click.

3.4. Volume Wheel

  • Volume +: Slide upwards.
  • Volume -: Slide downwards.
Diagram of noise-cancelling microphone and indicator light
Figure 3.2: Pluggable Microphone with Indicator Light

4. Setup & Connection

4.1. 2.4G Wireless Connection (PC/Laptop/PS4/PS5/Switch)

  1. Take out the 2.4G receiver (USB-A & Type-C) from the package.
  2. Plug the 2.4G receiver into an available USB port on your computer or console. The receiver's indicator light will flash.
  3. Press and hold the headset's Power Button for approximately 3 seconds to power it on.
  4. Double-click the Power Button to switch to 2.4G mode (the headset will announce: "Adapter Mode").
  5. The headset will automatically connect to the 2.4G receiver. Once connected, the headset's indicator light will turn green and slowly flash (once every 1.5 seconds).

4.1.1. 2.4G Receiver Binding (Re-pairing)

If the headset does not connect automatically or you need to re-pair the receiver:

  • Ensure the headset is in 2.4G mode.
  • Long press both the Power Button and the Microphone Button simultaneously until the white indicator light flashes 3 times.
  • Insert the USB receiver into your computer. The receiver's green indicator light will stay solid, indicating successful re-pairing.
  • When manually binding, keep the headset as close to the receiver as possible.
Video 4.1: MCHOSE V9 Headset User Guide - Demonstrates 2.4G connection, button functions, and software setup.

4.2. Bluetooth Connection (Mobile Phone/Tablet)

  1. Press and hold the Power Button for approximately 3 seconds to power on the headset.
  2. Double-click the Power Button to switch to Bluetooth mode. The indicator light will flash red and blue alternately, indicating it's waiting for connection.
  3. On your mobile phone or tablet, go to Bluetooth settings and search for available devices.
  4. Select "MCHOSE V9 Pro" from the list to pair.
  5. Once connected, the headset's indicator light will turn blue and slowly flash (once every 1.5 seconds).

4.2.1. Bluetooth Factory Reset

If you encounter issues with Bluetooth pairing:

  • Turn off the headset while it is in Bluetooth mode.
  • Long press the Power Button for 8 seconds until the white indicator light flashes 3 times rapidly. This indicates a successful factory reset.
  • You can now re-pair the headset. If there are existing connection records on your device, please delete them manually before re-pairing.

4.3. Wired Connection (Sound Card Mode)

  1. With the headset powered on, insert the USB-C charging cable into the headset and connect the other end to your computer.
  2. The headset will automatically switch to Sound Card Mode.
  3. You can double-click the Power Button to cycle between Adapter Mode (2.4G), Bluetooth Mode, and Sound Card Mode.
  4. In 2.4G and Bluetooth modes, you can connect the charging cable to charge while playing.
MCHOSE V9 Pro Multi-platform compatibility
Figure 4.1: Multi-platform compatibility including PC, Laptop, Switch, PS5/PS4, Mobile Phone, Tablet.

5. Operating Modes

The V9 Pro headset supports three customizable modes to suit your preferences:

  • Game Mode 1
  • Game Mode 2
  • Music Mode

Triple-click the Power Button to switch between these modes.

MCHOSE V9 Pro 3 Customizable Modes
Figure 5.1: Three customizable modes: Game Mode 1, Game Mode 2, and Music Mode.

6. Software Driver & Customization

To unlock the full potential of your MCHOSE V9 Pro headset, including 7.1 surround sound, EQ adjustments, and microphone enhancements, download and install the official M HUB client driver.

6.1. Driver Installation

  1. Visit the official MCHOSE website: https://www.maicong.cn
  2. Navigate to the "Driver" section and click "Download M HUB Client".
  3. Important: Insert the 2.4G receiver into your computer first, then install the driver.
  4. The M HUB client driver currently supports Windows 10 and above operating systems. Windows 7 and macOS are not supported.

6.2. Audio Customization (via M HUB Software)

The MCHOSE software allows for accurate control of your headset, featuring customizable equalizer settings, surround sound, and microphone adjustments.

MCHOSE Audio Equalizer Customization Software Interface
Figure 6.1: Audio Equalizer Customization Interface

6.2.1. Equalizer Settings

  1. In the M HUB software, right-click on the "Speakers" icon, then click "Equalizer".
  2. Enable the Equalizer.
  3. Adjust the equalizer settings as needed to customize your sound profile.
  4. You can save your adjusted settings as a preset by typing a name and clicking save.
  5. You can also restore the default settings or switch to official preset parameters (e.g., Dance, Rap, Metal, Jazz, etc.).

6.2.2. Surround Sound

  1. Right-click on the "Speakers" icon, then click "Xear Surround Headphone".
  2. Enable Xear Surround.
  3. Choose between "Music/Gaming mode" or "Movie mode" based on your preference.

6.2.3. Microphone Settings

  1. Right-click on the "Mic" icon.
  2. You can adjust the microphone volume control.
  3. Xear Magic Voice: Switch between different magic sounds to change your voice effect output.
  4. AI Noise Reduction: Enable AI noise reduction for the microphone to minimize background noise.

7. Charging

The MCHOSE V9 Pro headset features a 2000mAh large capacity battery, providing approximately 250 hours of battery life.

7.1. Charging Indicators

  • Low Battery: Red indicator light slowly flashes.
  • Charging: Red indicator light stays solid.
  • Fully Charged: Blue indicator light stays solid.

7.2. Charging Recommendations

  • It is recommended to charge the headset using only a computer's USB interface.
  • Do not use fast-charging mobile phone chargers for the headset.
  • Avoid using inferior non-standard power adapters.
  • Do not use over-voltage or over-current power adapters.
  • Keep the headset away from high-temperature devices while charging.
  • If not in use for a long time, please turn off the power switch.
NTC temperature control technology for battery
Figure 7.1: NTC temperature control technology ensures longer battery life and stable performance.

8. Specifications

FeatureSpecification
Brand NameMCHOSE
ModelV9 Pro
CategoryEarphones & Headphones
MaterialPlastic, Silica Gel
Vocalism PrincipleDynamic
Sound Effect7.1 FPS Surround Sound
Drive Unit53mm Bio Diaphragm Unit
Chip TechnologyProfessional E-sports-grade C-Media Sound Card Chip
HeadbandUltra-light Aluminum Alloy Frame Head Beam
Headphone Pads MaterialSpace Breathable Memory Foam + Skin-friendly Protein Leather
CommunicationWireless (2.4GHz, Bluetooth), Wired (Type-C)
Wireless TypeBluetooth
Bluetooth Version5.3
Maximum Wireless Range30m-40m (Bluetooth), ~15m (2.4G)
Wireless LatencyApprox. 15ms
Battery Capacity2000mAh
Battery LifeUp to 250 hours
Charging MethodCable (USB Type-C)
Microphone360° Omnidirectional AI Pickup Noise Reduction Microphone
Active Noise-CancellationYes
Sound IsolatingYes
Volume ControlYes
Control ButtonNo (referring to a single control button, but has multiple buttons)
WaterproofNo
WeightApprox. 275g
Compatible PlatformsPC, Laptop, PS5, PS4, Switch, Mobile Phone, Tablet

9. Troubleshooting

9.1. No Sound/Poor Audio Quality

  • Check Connection: Ensure the 2.4G receiver is properly plugged in, or Bluetooth is correctly paired, or the wired connection is secure.
  • Volume Levels: Adjust the volume wheel on the headset and check your device's audio output settings.
  • Mode Selection: Ensure the headset is in the correct connection mode (2.4G, BT, or Wired) and audio mode (Game/Music).
  • Driver Installation: For PC, ensure the M HUB driver is installed and updated. Check audio settings within the software.
  • Interference: Move away from other wireless devices that might cause interference.

9.2. Microphone Not Working

  • Microphone On/Off: Single-click the Microphone Button to toggle it on/off. The microphone light indicates its status.
  • Microphone Plugged In: Ensure the detachable microphone is securely plugged into the headset.
  • Device Settings: Check your device's sound settings to ensure the headset microphone is selected as the input device.
  • Software Settings: In the M HUB software, check microphone volume and ensure AI Noise Reduction is not overly aggressive if it's causing issues.

9.3. Headset Not Powering On/Charging

  • Charge Battery: Connect the headset to a power source using the USB-C cable. A red light indicates charging.
  • Check Cable/Port: Ensure the charging cable and port are not damaged. Try a different USB port or cable.
  • Power Button: Long press the Power Button for 3 seconds to ensure it's not just off.

9.4. Bluetooth Disconnection/Reconnection Issues

  • Range: Ensure the headset is within the Bluetooth range of your device (approx. 30-40m).
  • Auto-Reconnect: If the headset disconnects due to distance, it will automatically try to reconnect when back in range. If it doesn't reconnect within 5 minutes, it will power off.
  • Factory Reset: Perform a Bluetooth factory reset (see Section 4.2.1) and re-pair.

9.5. FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

10. User Tips

  • Optimize for Gaming: For competitive gaming, use the 2.4G wireless connection for the lowest latency (approx. 15ms) and enable 7.1 surround sound in the M HUB software to enhance positional audio.
  • Comfort for Long Sessions: The lightweight design (approx. 275g) and breathable memory foam earmuffs are designed for extended wear. Take short breaks during long gaming sessions to maintain comfort.
  • Custom Sound Profiles: Experiment with the equalizer settings in the M HUB software to create custom sound profiles for different games or music genres. Save them as presets for quick switching.
  • Clear Communication: Utilize the AI Noise Reduction feature for the microphone to ensure your voice is clear and free from background distractions during online multiplayer or calls.
  • Battery Management: To maximize battery life, remember to turn off the headset when not in use. Avoid using high-power chargers to prevent potential damage.

11. Warranty & Support

For warranty information, technical support, or service inquiries, please refer to the official MCHOSE website or contact your retailer. Keep your purchase receipt as proof of purchase.

Official MCHOSE Website: https://www.maicong.cn

© 2024 MCHOSE. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.