1. Product Overview
The UGREEN 5-Port Gigabit Ethernet Switch is an unmanaged network switch designed to expand your wired network connections for multiple devices. It offers high-speed 10/100/1000Mbps transmission for each port, supporting both full-duplex and half-duplex modes, and features automatic MDI/MDIX flip functionality for ease of use. Its plug-and-play design requires no driver installation, making it suitable for various environments such as homes, offices, and schools.
2. Package Contents
Please check the package contents carefully. If any item is missing or damaged, contact your retailer.
- 1 x UGREEN Ethernet Switch
- 1 x User Guide
- 1 x DC Power Adapter (DC 5V 1A)
3. Setup Instructions
The UGREEN Ethernet Switch is designed for easy, plug-and-play installation. No software drivers are required.
-
Power Connection: Connect the provided DC 5V 1A power adapter to the switch's DC IN port and then plug it into a power outlet. The power indicator light on the switch should illuminate.
-
Connect to Router/Modem: Connect one end of an Ethernet cable (Cat5e or higher recommended for Gigabit speeds) to an available LAN port on your router or modem. Connect the other end to any of the 5 RJ45 ports on the UGREEN Ethernet Switch. Any port can function as an upstream or downstream port due to automatic MDI/MDIX.
Figure 3: Expanding Your Network -
Connect Devices: Connect your network-enabled devices (e.g., computers, game consoles, smart TVs, network printers, security cameras) to the remaining RJ45 ports on the UGREEN Ethernet Switch using Ethernet cables (Cat5e or higher recommended).
Figure 4: Plug and Play Connectivity -
Wall Mounting (Optional): The switch features rear mounting holes for wall installation to save space. Ensure the mounting surface is suitable and use appropriate fasteners (not included).
Figure 5: Wall-mounted Design
4. Operating Instructions
Once connected, the UGREEN Ethernet Switch operates automatically without further configuration.
-
Indicator Lights: Each RJ45 port has an associated indicator light. A solid green light typically indicates a stable link, and a blinking light indicates data activity. The speed of the connection (10/100/1000Mbps) is automatically detected and adjusted by the switch.
Figure 6: Gigabit Speed Indication -
Full/Half Duplex: The switch automatically negotiates between full-duplex (simultaneous two-way communication) and half-duplex (one-way communication at a time) modes with connected devices.
-
Energy Saving: The switch features a fanless design for silent operation and is designed for high efficiency and reduced energy consumption, complying with IEEE802.3/u/x/ab standards.
5. Maintenance
To ensure optimal performance and longevity of your UGREEN Ethernet Switch, follow these maintenance guidelines:
- Keep the device in a cool, dry place, away from direct sunlight and heat sources.
- Avoid exposing the switch to water or excessive humidity.
- Clean the exterior of the switch with a soft, dry cloth. Do not use liquid or aerosol cleaners.
- Ensure proper ventilation around the device to prevent overheating.
- Do not attempt to open or repair the device yourself, as this will void the warranty.
6. Troubleshooting
If you encounter issues with your Ethernet switch, try the following troubleshooting steps:
- No Power: Ensure the power adapter is securely connected to the switch and a working power outlet. Check if the power indicator light is on.
- No Link/Connectivity:
- Verify that all Ethernet cables are securely plugged into both the switch and the connected devices/router.
- Check the status of the indicator lights on the switch for the affected ports. A solid light indicates a link.
- Try using different Ethernet cables to rule out cable faults.
- Ensure your router or server is functioning correctly and providing an active network connection.
- Restart the switch, router, and connected devices.
- Slow Speed:
- Ensure you are using Cat5e or higher Ethernet cables for Gigabit speeds. Older Cat5 cables may limit performance.
- Verify that your connected devices and router/modem support Gigabit Ethernet.
- Check for network congestion or issues with your Internet Service Provider.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | UGREEN |
| Model Number | CM833-35492 (35492) |
| Name | Ethernet Splitter |
| Color | Black |
| Material | Plastic shell |
| Interface Type | RJ45 |
| Ports | 5 Gigabit Ethernet (10/100/1000Mbps) |
| Transmission Rate | 10/100/1000Mbps |
| Compatible Devices | Desktop, Laptop, Router, Game Console, Smart TV, Security Camera |
| Power Input | DC 5V 1A |
| Dimensions (L x W x H) | 83mm x 52mm x 24mm (approximate) |
| Standards | IEEE802.3/u/x/ab |
| Features | Plug & Play, Auto MDI/MDIX, Fanless Design, Wall-Mountable |
8. User Tips
- For optimal Gigabit Ethernet performance, always use Cat5e or Cat6 Ethernet cables.
- Ensure your primary router or server also supports Gigabit Ethernet to fully utilize the switch's capabilities.
- Take advantage of the wall-mounting feature to keep your setup tidy and save desk space.
- The switch is unmanaged, meaning it requires no configuration, making it ideal for simple network expansion.
9. Warranty and Support
UGREEN products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your product or visit the official UGREEN website for contact details.