RETEKESS TC202

Contents

RETEKESS TC202 AI Tracking Streaming Webcam User Manual

Model: TC202 | Brand: RETEKESS

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your RETEKESS TC202 AI Tracking Streaming Webcam. The TC202 is a high-definition PTZ (Pan-Tilt-Zoom) camera designed for video conferencing, streaming, and other professional applications, featuring AI auto-tracking, multiple connectivity options, and wide viewing angles.

Video: RETEKESS TC202 AI Tracking Streaming Webcam Overview

2. Safety Notes

  • Electric Safety: Installation and operation must comply with electric safety standards.
  • Caution to Transport: Avoid stress, vibration, or soaking during transport, storage, and installation.
  • Polarity of Power Supply: The power supply is DC 12V. Ensure correct polarity as shown in the diagram below.
  • Installation Precautions: Do not grasp the camera lens when carrying. Avoid touching the lens by hand to prevent mechanical damage. Do not use in corrosive liquid, gas, or solid environments. Ensure no obstacles are within the camera's rotation range. Always complete installation before powering on.
  • Do not Dismantle the Camera: Unauthorized modification or dismantling is not supported and may void warranty.
  • Electromagnetic Interference: Specific frequencies of electromagnetic fields may affect the camera's image.
RETEKESS TC202 camera and accessories

Image: RETEKESS TC202 camera, remote control, and mounting accessories.

3. Packing List

Item Quantity
Camera1
Power Adapter1
Power Cable1
USB Cable1
HDMI Cable1
Remote Control1
User Manual1

Image: The package includes the PTZ camera, remote control, USB Type-C 3.0 cable, HDMI cable, power adapter, user manual, and a wall-mount accessory kit.

Package contents of RETEKESS TC202

4. Quick Start Guide

  1. Check Connections: Before starting, ensure all connections are correct. Refer to the 'Interfaces and Buttons' section for port details.
  2. Connect Power: Connect the power adapter to the DC 12V power connector on the rear panel of the camera. The power indicator on the front panel will illuminate.
  3. Initialization: After powering on, the camera will perform an initialization sequence. It will turn to its limit positions horizontally and vertically, then return to the middle position. Initialization is complete when the motor stops. If preset 0 is saved, the PTZ will move to preset 0.
Diagram showing multiple connection methods for the camera

Image: Multiple connection methods including USB3.0, HDMI, NET, and PoE.

5. Product Specifications

5.1 PTZ Camera Specifications

Feature Specification
Video System1080P/60, 1080P/50, 1080/P30, 1080P/25, 720P/60, 720P/50
Sensor1/2.8 inch, CMOS, Effective Pixel: 2.07M
Scanning ModeProgressive
Lens12x, f=3.5mm~42.3mm, F1.8~F2.8
Digital Zoom16x
Minimum Illumination0.5 Lux @ (F1.8, AGC ON)
Shutter1/30s~1/10000s
White BalanceAuto, Indoor, Outdoor, One Push, Manual, VAR
Backlight CompensationSupport
Digital Noise Reduction2D & 3D Digital Noise Reduction
Signal Noise Ratio≥55dB
Horizontal Angle of View72.5°~6.9°
Vertical Angle of View44.8°~3.9°
Horizontal Rotation Range±170°
Vertical Rotation Range-30°~+90°
Pan Speed Range2.7°~35.7°/s
Tilt Speed Range2.7°~31.5°/s
H & V FlipSupport
Image FreezeSupport
Number of Preset255
Preset Accuracy0.1°

5.2 Network Features

Feature Specification
Video CompressionH.264/MJPEG
Video StreamFirst Stream, Second Stream
First Stream Resolution1920x1080, 1280x720, 1024x576, 960x540, 640x480, 640x360
Second Stream Resolution1280x720, 1024x576, 720x576 (50Hz), 720x480 (60Hz), 720x408, 640x360, 480x272, 320x240, 320x180
Video Bit Rate for First Stream32Kbps~20480Kbps
Video Bit Rate for Second Stream32Kbps~6144Kbps
Bit Rate ControlCBR, VBR
Frame Rate50Hz: 1fps~50fps; 60Hz: 1fps~60fps;
Audio TypeAAC
Audio Bit Rate96Kbps, 128Kbps, 256Kbps
ProtocolsTCP/IP, HTTP, RTSP, RTMP(S), ONVIF, DHCP, Multicast, etc.

5.3 USB Features

Feature Specification
Operate SystemWindows 7, Windows 8, Windows 10, Windows 11, Mac OS X, Linux, Android.
Color System / CompressionMJPG/YUY2/H.264
Video FormatYUY2:1080P@60fps (max.); H.264 AVC:1080P@60fps (max.); H.264 SVC:1080P@60fps (max.); MJPEG:1080P@60fps (max.)
USB AudioSupport
USB Video Communication ProtocolUVC 1.1

5.4 Physical Parameters

Feature Specification
Input VoltageDC 12V/DC 5V/PoE (802.3af)
Current Consumption12V 1.0A (max.) /5V 1.5A (max.)
Operating Temperature-10°C~40°C
Storage Temperature-40°C~60°C
Power Consumption12W (max.)
MTBF>30000h
Size (mm)144 x 144 x 166.9
Net Weight1.4Kg

6. Interfaces and Buttons

The rear panel of the TC202 camera features various interfaces for connectivity and control:

Rear view of RETEKESS TC202 with labeled ports

Image: Rear view of the camera showing Network, HDMI, RS232, USB3.0, Line In, RS485, and DC 12V interfaces.

Item No. Name
1Network Interface (NET)
2HDMI Interface
3RS232 Interface
4USB 3.0 Interface
5LINE IN Interface
6RS485 Interface
7DC 12V Interface

7. Remote Control

The included infrared remote control allows for easy operation of the camera's PTZ functions, presets, and other settings.

Infrared remote control for RETEKESS TC202

Image: Infrared remote control for the TC202 camera.

7.1 Key Description

Key Function
1. Standby KeyPress to enter/resume standby mode. Power consumption is approximately half in standby.
2. Number KeyTo set or call presets.
4. PRESET KeySet preset: [PRESET] + Number key (0-9).
5. HOME KeyConfirm selection or return PTZ to middle position.
6. Return KeyReturn to previous menu.
7. ZOOM KeySLOW: Zoom In [+] or Zoom Out [-] slowly. FAST: Zoom In [+] or Zoom Out [-] fast.
8. L/R SET KeyPress with 1 or 2 to set Pan-Tilt direction. STD (1): same direction. REV (2): opposite direction.
9. FOCUS KeyFocus adjustment: [AUTO] for automatic, [MANUAL] for manual. In manual mode, [FAR] for distant objects, [NEAR] for close objects.
10. CAMERA SELECT KeySelect and control the camera.
12. IR Remote Control KeySet camera address: [*] + [#] + [F1/F2/F3/F4] for Address 1/2/3/4.
13. RESET KeyClear preset: [RESET] + Number key (0-9). Erase all presets: [*] + [#] + [CLEAR PRESET].
14. PTZ Control KeyArrow buttons for panning and tilting. [HOME] to face camera back to front.
15. MENU KeyEnter or exit OSD MENU.
16. BACKLIGHT KeyToggle backlight compensation ON/OFF. Effective in auto exposure mode.
17. P/T RST (PTZ Reset) KeyPress to preset Pan/Tilt self-test.
Image Freezing FunctionManual freeze: [F4] to freeze/unfreeze. Preset recall freeze: Enabled via OSD menu.
Short cut Set[*] + [#] + [1]: OSD menu default English; [*] + [#] + [3]: OSD menu default Chinese; [*] + [#] + [4]: Display current IP address; [*] + [#] + [6]: Quickly recover the default; [*] + [#] + [8]: View camera version; [*] + [#] + [9]: Quickly set up inversion; [*] + [#] + [MANUAL]: Restore to default IP address.

8. GUI Settings

The camera's On-Screen Display (OSD) menu allows for detailed configuration of various settings. To access the main menu, press the [MENU] key on the remote control. Use the arrow keys to navigate and [HOME] to confirm selections.

8.1 Exposure Settings

Adjust exposure parameters such as Mode (Auto, Manual, SAE, AAE, Bright), Exposure Compensation, Backlight, Gain Limit, Anti-Flicker, Metering, Iris, Shutter, and DRC.

8.2 Color Settings

Configure White Balance Mode (Auto, Indoor, Outdoor, One Push, Manual, VAR), RG/BG Tuning, Saturation, Hue, AWB Sensitivity, RG/BG Gain, and Color Temperature.

8.3 Image Settings

Control image attributes including Luminance, Contrast, Sharpness, Flip-H/V, B&W Mode, Gamma, and Style.

8.4 P/T/Z Settings

Manage PTZ functions such as SpeedByZoom, AF-Zone, AF-Sense, Display Info, Image Freeze, Digital Zoom, Call Preset Speed, and Pre Zoom Speed.

8.5 Noise Reduction Settings

Adjust 2D and 3D Digital Noise Reduction levels (NR2D-Level, NR3D-Level) to improve image clarity in low-light conditions.

8.6 Setup Menu

General settings including Language, Video Format, USB Mode, OSD Flip, USB Audio, and UVC H264 options.

8.7 Communication Setup

Configure communication parameters such as Protocol (VISCA, PELCO-D, PELCO-P), V_Address, V_AddrFix, Net Mode, and Baudrate.

8.8 Restore Default

Option to restore all camera parameters to their factory default settings, including IR Remote address and VISCA address.

8.9 AI Mode

Configure AI tracking mode (on/off/automatic money selection) and AI power-off save. This feature enables AI tracking, allowing the lens to follow the movement of a person.

9. Network Function

9.1 Operating Environment

The camera is compatible with Windows 7, 8, 10, 11, Mac OS X, and Linux operating systems. It uses TCP/IP network protocol.

9.2 Equipment Installation

Connect the camera to your network or directly to a PC using a network cable. Power on the camera. The network indicator will light up and the data indicator will flash when a physical network connection is established.

9.3 Internet Connection

The camera can be connected directly to a PC or via a router/switch using a network cable.

Diagram showing network connection options for the camera

Image: Network connection diagram for the TC202 camera.

9.4 Camera Controlled by LAN

9.4.1 Setup IP Address

The factory default IP address is 192.168.100.88. To view the camera's IP address, press *, #, and 4 sequentially on the remote control. To change the IP address, log in to the web page (e.g., http://192.168.100.88) using the default username admin and password admin. Navigate to "Network > Lan Settings", input the new IP address, and click "Set" to apply changes and restart the camera.

9.4.2 Visit/Access Camera

After setting up the IP address, you can access the camera's web interface by visiting http://[Camera_IP_Address] in your web browser. Enter the username admin and password admin to log in. Note that some older browsers might require a VLC plug-in to view video streams; refer to the VLC website (http://www.videolan.org/vlc) for downloads if needed. Modern browsers typically support H5 and do not require additional plugins.

10. Maintenance and Troubleshooting

10.1 Camera Maintenance

  • If the camera will not be used for an extended period, disconnect the AC power adapter.
  • Use a soft cloth or tissue to clean the camera cover.
  • For the lens, use a soft dry cloth. If very dirty, use a diluted neutral detergent. Avoid any type of solvents.

10.2 Unqualified Working Environment

  • Avoid pointing the camera at strong light sources (e.g., sunlight).
  • Do not operate the camera under unstable lighting conditions to prevent image flickering.
  • Do not use the camera near strong electromagnetic radiation sources (e.g., TV or radio transmitters).

10.3 Troubleshooting

Image Issues

  • Image jitters at maximum zoom:
    1. Check that the camera installation position is stable.
    2. Check for any vibrating machinery or objects near the camera.
  • No video image in browser: Ensure your browser supports H5 or install the VLC plug-in if using an older browser.

Network Issues

  • Unable to access through the browser:
    1. Use a PC to test network access and ensure the PC and camera can ping each other.
    2. Disconnect the network, connect the camera directly to the PC, and reset the PC's IP address if necessary.
    3. Verify that the IP address, subnet mask, and gateway settings are correct.
    4. Check for MAC address conflicts.
    5. Ensure the web port is correctly configured (default is 80).
  • Forgot IP address or login password: The default IP is 192.168.100.88, and the default username/password is admin/admin.

Control Issues

  • Remote control does not work:
    1. Check and replace batteries.
    2. Ensure the camera is in normal working mode.
    3. Verify the remote control's address key matches the camera's setting.
  • Serial port cannot control:
    1. Check that the protocol, address, and bit rate of the camera are consistent with the control device.
    2. Ensure the control cable is properly connected.

11. User Tips

  • Optimal Placement: For best AI tracking performance, ensure the camera is placed at a height and distance that allows a clear view of the speaker's face and upper body. Avoid placing it too high or too low.
  • Lighting Conditions: While the camera performs well in low light (0.5 Lux), optimal lighting will always yield the best image quality. Avoid strong backlighting that can silhouette subjects.
  • Preset Positions: Utilize the 255 preset positions to quickly switch between common viewing angles in your conference room or studio. This saves time during meetings and presentations.
  • Firmware Updates: Periodically check the RETEKESS official website for any available firmware updates to ensure your camera has the latest features and performance improvements.
  • Cable Management: Proper cable management can prevent accidental disconnections and ensure a tidy setup, especially for wall-mounted or tripod installations.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the official RETEKESS website or contact your local distributor. Keep your purchase receipt as proof of purchase.

A detailed user manual in PDF format is available for download. You can access it via this link: RETEKESS TC202 User Manual (PDF).

© 2023 RETEKESS. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.