jikong LCD-7.0-TTL-P

Contents

User Manual: jikongBMS Smart LCD Display 7.0 INCH

Model: LCD-7.0-TTL-P

Brand: jikong

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of the jikongBMS Smart LCD Display 7.0 INCH, model LCD-7.0-TTL-P. This display is designed to be an accessory for jikong Smart BMS systems, particularly the V19 Inverter Version, offering a clear and interactive interface for monitoring and managing energy storage solutions.

jikongBMS Smart LCD Display 7.0 INCH and a BMS unit
Figure 1: jikongBMS Smart LCD Display 7.0 INCH connected to a BMS unit.

2. Product Features

  • Wide Power Supply: Supports a working voltage range of 9V to 36V.
  • Comprehensive Display: Shows battery total voltage, battery power, and single series voltage.
  • Communication: Supports TTL/CMOS levels with a maximum baud rate of 921600bps.
  • Multi-language Support: Offers Chinese, English, Thai, and Vietnamese language options.
  • Customizable Interface: Allows for language, logo, and general interface customization.
  • BMS Integration: Designed for use with SMART BMS systems, providing active balancing and protection functions such as overcharge, over-discharge, overcurrent, and short circuit protection.
  • Certifications: CE, FCC, RoHS compliant.

3. Specifications

ParameterValue
Display CategoryTFT
Display Size7-inch
Resolution1024 x 600
Backlight Type / BrightnessLED / 200 cd/m²
Viewing Angle (L/R/U/D)60°/60°/50°/40°
Operating Temperature-10°C to +60°C
Storage Temperature-20°C to +70°C
Operating Humidity10% to 90% RH (at 25°C)
Supply Voltage9V to 36V (with reverse protection)
Power Dissipation2.7W (12V@225mA)
Dimensions (Lens OD)187.00mm (L) x 120.00mm (W) x 14.54mm (D)
Diagram showing the dimensions of the 7.0 inch display
Figure 2: Physical dimensions of the 7.0 inch display.

4. Setup and Installation

4.1 External Interfaces

The display features several interfaces for connection to your BMS system:

  • User Interface: Used for power supply and serial port signal connection. This uses a HY2.0mm-6P vertical stick socket.
  • Key Extension Interface: Controls BMS startup and shutdown. This uses a GH1.25-6P vertical sticker socket.
  • TF Card Interface: For offline download and interface translation using a TF card.
Diagram showing the UART connector on the BMS and the 7.0 inch touch screen display
Figure 3: Connection of the 7.0 inch display to a jikong PB Series BMS via UART connector.

4.2 Wiring Diagram

The standard cable length provided is 0.5 meters. Custom lengths may be available if necessary.

Image of the 50cm cable included with the display
Figure 4: Standard 50cm connection cable for the display.

Refer to the pin definition table for correct wiring:

NumberNameDefinition
1K-Activation signal negative electrode
2K+Activation signal positive electrode
3GNDGround
4TXDSerial Port Output
5RXDSerial Port Input
6VINPower Supply

5. Operating Instructions

5.1 APP Operation Instructions

To ensure proper communication between the display and your BMS, configure the JiKong BMS APP:

  1. Open the JiKong BMS APP.
  2. Navigate to the "Parameter Setting" page.
  3. Change the "Serial port 3 protocol" to "015-JK BMS PBxx SERIES LCD Protocol V1.0".
Screenshots of the JiKong BMS APP showing parameter settings for serial port protocol
Figure 5: JiKong BMS APP settings for serial port protocol.

5.2 Display Interface Operation

The 7.0-inch display provides various screens to monitor your battery system:

5.2.1 Battery Interface

This screen shows the overall status of your battery string, including:

  • Current voltage and current of the battery string.
  • Number of online battery packs.
  • Charging and discharging status of the entire battery string.
  • Highest and lowest cell temperatures.
Screenshot of the display's Battery Interface showing voltage, current, capacity, and cell temperatures
Figure 6: Battery Interface displaying key battery parameters.

5.2.2 Battery Pack Interface

In parallel mode, you can select individual battery packs to view detailed information:

  • Design capacity and remaining capacity of each pack.
  • Charging and discharging status of each pack.
  • Voltage of each cell within the pack.
  • Up to 16 battery packs can be displayed.
Screenshot of the display's Battery Pack Interface showing individual cell voltages and pack status
Figure 7: Battery Pack Interface showing detailed information for individual battery packs.

5.2.3 Protocol Selection Interface

This interface allows you to select the appropriate communication protocols for your BMS system:

  • Choose between various 485 protocols.
  • Select the relevant CAN protocol.
Screenshot of the display's Protocol Selection Interface showing lists of 485 and CAN protocols
Figure 8: Protocol Selection Interface for 485 and CAN protocols.
Screenshot of the display's CAN Protocol Selection Interface showing a list of CAN protocols
Figure 9: CAN Protocol Selection Interface.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the display screen. Avoid abrasive cleaners or solvents.
  • Environmental Conditions: Ensure the display operates within the specified temperature and humidity ranges to prevent damage.
  • Connections: Periodically check all cable connections to ensure they are secure and free from corrosion.

7. Troubleshooting

7.1 Fault Alarm Interface

When a fault occurs, an alarm icon will light up on the display, and a corresponding fault code will be shown. Refer to the table below for fault code descriptions:

Fault CodeAlarm Description
1Single cell undervoltage alarm
2Single cell overvoltage alarm
3Overcurrent alarm
4MOS overtemperature alarm
5Battery overtemperature alarm
6Short circuit alarm
7Internal communication failure alarm
8Balancing line resistance too high alarm
9Cell string loss

If a fault occurs, identify the fault code and consult the BMS manual for specific resolution steps. Ensure all connections are secure and the BMS is functioning correctly.

8. User Tips

  • Always ensure the display is securely connected to the BMS to prevent communication errors.
  • Regularly check the APP settings to confirm the correct serial port protocol is selected for optimal performance.
  • Keep the display screen clean and free from dust for clear visibility of battery parameters.

9. Warranty and Support

For detailed warranty information, technical support, or further assistance, please refer to the official jikong BMS documentation or contact jikong customer service. A comprehensive user manual in PDF format is available for download:

Download User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.