Introduction
Thank you for choosing the Retekess Queue Wireless Calling System. This system utilizes RF wireless technology with millions of different learning codes, providing an efficient solution for managing customer queues.
The system includes a keypad call button base with 20 battery charging slots and portable buzzer/vibration receivers. Each receiver is rechargeable and uniquely numbered. When a client places an order, they are given a numbered receiver. Once the order is ready, the staff presses the corresponding number on the keypad to alert the client via buzzer, vibration, or LED indications.
This system significantly improves work efficiency and reduces customer waiting times, making it ideal for fast-food restaurants, dessert shops, cafes, bars, food trucks, hotels, churches, clinics, and other establishments with queuing needs.
Key Features:
- 999 channels keypad call buttons (for 999-channel keypad model)
- 20 batteries charging slots
- Portable rechargeable vibration & buzzer receiver
- Independent storage memory to prevent data loss
- High receive sensitivity
- Self-testing upon power-on
- Elegant and modern design
Setup Instructions
1. System Components Overview
The Retekess T111/T112 system consists of a main keypad transmitter base and multiple pagers (receivers).

2. Connecting to Power
- Connect the power adapter to the keypad transmitter base.
- Plug the power adapter into a suitable electrical outlet. The keypad will perform a self-testing procedure, and the power icon will illuminate.
3. Pager Power On and Charging
- To power on a receiver (pager), press and hold the 'Power' button on the side of the pager for 3 seconds. The pager will vibrate and sound 5 times, and the LED1 indicator will flicker every 3 seconds, indicating standby status.
- Place the pager into a charging slot on the base. It will vibrate and sound 5 times, and the blue charging LED will illuminate, indicating it is in charging status.

4. Pairing Method
The receivers must be paired to the keypad before use. For pairing or mode settings, first remove the transparent cover and number paper from the pager.

- To Pair: Short press the 'Set' button on the pager. The LED1 indicator will turn on. Then, on the keypad, enter the desired call number and press the 'Call' button. The pager will receive the signal, and the LED1 lamp will turn off, indicating successful pairing. If the pager does not receive a signal within 10 seconds, it will automatically exit pairing status.
- To Delete Pairing: Press and hold the 'Set' button on the pager for 5 seconds. The LED1 indicator will flash ON-OFF. Release the button, and all previously paired call buttons will be deleted from that pager.
5. Changing Number Paper
To customize the number displayed on the pager:
- Carefully take out the transparent plexiglass cover from the front of the receiver.
- Insert your desired number paper into the paper slot.
- Replace the transparent cover securely.
Note: When performing pairing operations, ensure the cover and paper are removed first.
Operating Instructions
1. Standard Calling Procedure
- When a client places an order, provide them with a numbered receiver and note down the corresponding number.
- When the order is ready, the service staff will press the client's number on the keypad transmitter base.
- The corresponding receiver will receive the signal and prompt the client using vibration, buzzer, and/or flashing lights for 5 minutes. After 5 minutes, only the 3 LED indicators will continue to flicker.
- To reset the pager's status, the client can press the 'Power/Reset' button on the pager or place it back into a charging slot on the base.
- The client returns the receiver to the service staff, who then place it back into a charging slot on the base.
2. Prompt Modes
The pager offers three distinct prompt modes to suit different environments:

- Vibration + Flash: The pager vibrates and its LEDs flash.
- Buzzer + Flash: The pager emits a sound and its LEDs flash.
- Vibration + Flash + Buzzer: The pager vibrates, buzzes, and its LEDs flash simultaneously.
To change the prompt mode, use the 'Mode' button on the pager. The upper position typically corresponds to vibration only, while the lower position activates both vibration and buzzer.
3. Keypad Operation
The system supports two types of keypads: a 999-channel keypad and a 20-channel keypad.
- 999-Channel Keypad: Uses a combination of 0-9 buttons to generate up to 999 different call codes. To call, press the desired number (e.g., '1', '2', '3' for pager 123) and then 'Call'. If you enter a wrong number, press 'Backspace' to delete and re-enter.
- 20-Channel Keypad: Features 20 direct number buttons. Simply press the corresponding number button to send the wireless signal directly to the pager.
4. One-Button Shutdown

To shut down all active receivers simultaneously, long press the '9' button on the keypad transmitter base.
5. Multiple Transmitters for One Pager

The system allows different keypad transmitters to call the same pager. This is particularly useful in scenarios where different service points (e.g., checkout and food pickup) need to alert the same customer. In such cases, you may require two or more keypad transmitters.
6. Pager Position Reporting
While a receiver is in its charging slot, pressing its number on the keypad will cause the receiver's LED indicators to flicker 3 times, reporting its position.
7. Stopping the Reminder

When a guest receives a reminder, they can press the 'Power/Reset' button on the pager to stop the alert.
Product Demonstration Video
Maintenance
1. Charging the Receiver
When the receiver's voltage drops below DC3.2V, it indicates low power. LED1 and the blue charging LED indicator will flicker, accompanied by a short buzzer sound. Please recharge the pager promptly.
When plugged into the charging slot, the blue charging LED indicator will flicker. Once fully charged, the LED indicator will remain steadily on.
2. Battery Care
- For daily operation, the receiver can remain powered on continuously. However, if the system will not be used for an extended period, it is recommended to power off the receivers to conserve battery life.
- If a receiver has not been used for a long time, ensure it is charged for a while before being given to a client.
3. Cleaning
To clean the keypad transmitter base and pagers, use a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the device's surface and internal components.
Troubleshooting (FAQ)
| Problem | Reason | Solution |
|---|---|---|
| When powered on, the number display on the keypad is not on. | The power adapter is broken. | Change the power adapter. |
| The effective working distance of some receivers decreases. | The battery power is low. | Charge the battery in time. |
| A receiver cannot get any signal from the keypad call button. | The pairing is deleted; the number is not correct. | Pair the receiver again to the keypad. |
| Forgot the number of a receiver. | N/A | Delete the existing pairing first, then pair it again with a new number. |
Specifications
Receiver (Pager)
| Attribute | Value |
|---|---|
| Working Voltage | DC3.7V (rechargeable lithium battery) |
| Charging Voltage | DC 5V |
| Working Frequency | 433.92MHz |
| Standby Current | 10±5mA |
| Working Current | 75±10mA (vibration) |
| Receive Sensitivity | -107±2dBm |
| Battery Capacity | 360mAh |
| Decoder | Learning code (AM) |
| Dimensions | 49 x 101 x 11mm (1.9 x 3.9 x 0.4 in) |
| Standby Time | 12 Hours |
| Charging Time | 3-4 Hours |
| Flash Color | Red & Blue |
Keypad Call Button (Transmitter)
| Attribute | Value |
|---|---|
| Working Voltage | DC 5V/6A (power adapter) |
| Working Frequency | 433.92MHz |
| Standby Current | 24±5mA |
| Transmit Current | 100±30mA |
| Encoder | Learning code (AM) |
| Adapter | AC 100-240V 50/60Hz |
| Dimensions | 150 x 300 x 33mm (11.8 x 5.9 x 1.3 in) |
| Pager Number | 20 pcs |
| Working Distance | 500m (1640ft) in open area |
User Tips
- Optimize Range: For best transmission range, ensure the keypad transmitter's antenna is unobstructed and positioned centrally within the service area.
- Customization: Take advantage of the customizable number paper slots on the pagers to display your branding, special offers, or clear instructions for customers.
- Battery Management: Regularly check pager battery levels, especially during peak hours, to ensure uninterrupted service. Charge pagers fully before each use or shift.
Safety and Warnings
ATTENTION! Before using this radio, read this guide which contains important operating instructions for safe usage and RF energy awareness and control for compliance with applicable standards and regulations.
Local Government Regulations
When radios are used as a consequence of employment, local government regulations require users to be fully aware of and able to control their exposure to meet occupational requirements. Exposure awareness can be facilitated by the use of a product label directing users to specific user awareness information. Your Retekess radio has an RF Exposure Product Label. Also, your user manual, or separate safety booklet includes information and operating instructions required to control your RF exposure and to satisfy compliance requirements.
Compliance with RF Exposure Standards
Your Retekess radio is designed and tested to comply with a number of national and international standards and guidelines for human exposure to radio frequency electromagnetic energy.
FCC ID
This radio complies with the IEEE (FCC) and ICNIRP exposure limits for occupational/controlled RF exposure environments at operating duty factors of up to 50% talk-50% listen and is approved for occupational use only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CE Certification
The CE marking indicates that Henan Eshow Electronic Commerce Co.,Ltd. declares that the radio equipment type is in compliance with the RED Directive 2014/53/EU and the ROHS Directive 2011/65/EU and the WEEE Directive 2012/19/EU. The full text of the EU declaration of conformity is available at www.tivdio.com.
Avoid Choking Hazard
Small Parts. Not for children under 3 years.
Protect Your Hearing
- Use the lowest volume necessary to do your job.
- Turn up the volume only if you are in noisy surroundings.
- Turn down the volume before adding a headset or earpiece.
Turn Off Your Radio Power in the Following Conditions:
- Before removing (installing) a battery or accessory, or when charging.
- In potentially hazardous environments: Near electrical blasting caps, in a blasting area, in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.).
- While taking on fuel or while parked at gasoline service stations.
To Avoid Electromagnetic Interference and/or Compatibility Conflicts:
- Turn off your radio in any facility where posted notices instruct you to do so, such as hospitals or health care facilities (Pacemakers, Hearing Aids and Other Medical Devices) which may be sensitive to external RF energy.
- Turn off your radio when on board an aircraft. Any use of a radio must be in accordance with applicable regulations per airline crew instructions.
Avoid Burns
- Antennas: Do not use any portable radio that has a damaged antenna. If a damaged antenna comes into contact with the skin when the radio is in use, a minor burn can result.
- Batteries: Exercise care in handling any battery. When conductive material such as jewelry, keys, or chains touch exposed terminals of the batteries, it may complete an electrical circuit (short circuit the battery) and become hot, causing bodily injury such as burns.
- Long Transmission: When the transceiver is used for long transmissions, the radiator and chassis will become hot.
Safety Operation
- Do not use the charger outdoors or in moist environments; use only in dry locations/conditions.
- Do not disassemble the charger, as this may result in a risk of electrical shock or fire.
- Do not operate the charger if it has been broken or damaged in any way.
- Do not place a portable radio in the area over an airbag or in the airbag deployment area. The radio may be propelled with great force and cause serious injury to occupants of the vehicle when the airbag inflates.
- To reduce risk, pull by the plug rather than the cord when disconnecting the charger.
- Unplug the charger from the AC outlet before attempting any maintenance or cleaning.
- Contact Retekess for assistance regarding repairs and service.
Warranty and Support
Packing List (Standard Package)
| Item | Quantity |
|---|---|
| Call button keypad | 1 pc |
| Receiver | 20 pcs |
| Power adaptor | 1 pc |
| User manual | 1 pc |
| Warranty card | 1 pc |

Contact Information
For further assistance, technical support, or warranty inquiries, please contact:
Henan Eshow Electronic Commerce Co.,LtdAddress: Room 722, Sanjiang Building, No.170 Nanyang Road, Huiji District, Zhengzhou, Henan, China
Facebook: facebook.com/RetekessWirelessSystem
E-mail: support@retekess.com