STARTRC Ice Core Cooling Radiator for DJI Pocket 3

Contents

STARTRC Ice Core Cooling Radiator for DJI Pocket 3

Instruction Manual

Introduction

Thank you for choosing the STARTRC Ice Core Cooling Radiator for your DJI Pocket 3. This device is engineered to effectively manage the temperature of your DJI Pocket 3 camera, preventing overheating and frequency reduction during demanding tasks such as 4K video recording and extended shooting sessions. Its custom-fit design ensures seamless integration without interfering with other accessories, providing a stable and cool operating environment for your camera.

This manual provides essential information on the product's features, setup, operation, and maintenance to help you maximize its performance and prolong the life of your DJI Pocket 3.

Safety Information

  • Keep the device away from water and other liquids.
  • Do not attempt to disassemble or modify the cooler.
  • Ensure proper ventilation around the cooler during operation.
  • Use only the provided or recommended charging cable.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • Keep out of reach of children.

Package Contents

  • STARTRC Ice Core Cooling Radiator for DJI Pocket 3
  • Type-C Charging Cable

Product Overview

The STARTRC Ice Core Cooling Radiator features a compact design with a powerful turbo fan and semiconductor refrigeration chip. It includes a digital display for real-time temperature monitoring and a spring button switch for easy attachment and removal.

Key Features:

  • Custom Fit: Specifically designed for DJI Pocket 3, ensuring no interference with bottom accessories.
  • 3 Gears Adjustment: Manual (Gear 1/2) and Intelligent Auto mode for precise temperature control.
  • Powerful & Silent Cooling: Turbo fan and semiconductor chip provide strong cooling without condensation or noise.
  • Anti-Scratch Protection: Built-in silicone pad protects the camera body.
  • Type-C Charging: Supports charging while shooting.

Component Identification:

Close-up view of the STARTRC Ice Core Cooling Radiator showing the fan, digital display, and power button.
Figure 1: Front view of the cooling radiator with fan, digital display, and control buttons.
  • Cooling Fan: High-speed fan for heat dissipation.
  • Digital Display: Shows real-time temperature.
  • Power Button: Controls power on/off and mode selection.
  • Type-C Port: For charging the cooler.
  • Spring Button Switch: For quick attachment and detachment to the DJI Pocket 3.
  • Silicone Pad: Protects the camera from scratches.

Setup

Attaching the Cooler to DJI Pocket 3:

  1. Ensure your DJI Pocket 3 is powered off.
  2. Align the STARTRC Ice Core Cooling Radiator with the body of the DJI Pocket 3. The cooler is designed to fit snugly around the camera.
  3. Press the spring button switch on the cooler to open its clasp.
  4. Carefully slide the DJI Pocket 3 into the cooler's housing until it clicks securely into place. The built-in silicone pad will ensure a scratch-free fit.
  5. Verify that the cooler is firmly attached and does not obstruct any camera functions or ports, especially the bottom accessory port.
Side view of the cooler attached to DJI Pocket 3, showing secure fit.
Figure 2: Cooler securely attached to DJI Pocket 3.

Charging the Cooler:

Connect the provided Type-C charging cable to the Type-C port on the cooler and plug the other end into a suitable USB power source (e.g., wall adapter, power bank). The cooler can be charged while attached to the DJI Pocket 3 and while shooting.

DJI Pocket 3 with cooler attached, connected to a power source via Type-C cable.
Figure 3: Cooler connected for charging while in use.

Video Guide for Installation and Features:

Video 1: Demonstrates cooler features, temperature display, thermal comparison, and installation steps.

Operating Instructions

Power On/Off:

Press and hold the power button on the cooler to turn it on or off. The digital display will illuminate upon powering on.

Temperature Control Modes:

The cooler offers three operating modes, indicated by LEDs next to the digital display:

  • Gear 1 (Manual Low): Provides a lower level of cooling. Press the power button briefly to cycle to this mode.
  • Gear 2 (Manual High): Provides a higher level of cooling. Press the power button briefly to cycle to this mode.
  • AUTO (Intelligent Mode): Utilizes NTC intelligent temperature sensing technology to automatically adjust fan speed based on the camera's temperature. This mode is recommended for optimal performance and device longevity. Press the power button briefly to cycle to this mode.

The digital display will show the current temperature of the cooling surface in real-time.

Important Note for Manual Modes:

When operating in Gear 1 or Gear 2, if the operating temperature reaches or exceeds 38℃, the LED indicator for the current gear will flash at a frequency of 500ms. The cooling power will remain unchanged. In this situation, it is recommended to manually switch to a higher cooling gear (if available) or switch to AUTO mode, or turn off the device to prevent potential issues.

Maintenance

  • Cleaning: Use a soft, dry cloth to wipe the exterior of the cooler. Do not use harsh chemicals or abrasive materials. Ensure the fan vents are clear of dust and debris for optimal airflow.
  • Storage: When not in use, store the cooler in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Battery Care: If the cooler has an internal battery (not explicitly stated but implied by charging), ensure it is charged periodically if stored for long durations to maintain battery health.

Troubleshooting

Problem Possible Cause Solution
Cooler not turning on Low battery or no power connection. Connect the cooler to a power source using the Type-C cable. Ensure the power button is pressed correctly.
Ineffective cooling Fan vents blocked, incorrect mode, or extreme ambient temperature. Check for obstructions in fan vents. Switch to a higher manual gear or AUTO mode. Operate in a cooler environment if possible.
LED flashing in manual mode Operating temperature ≥ 38℃. Switch to a higher cooling gear (if available), AUTO mode, or turn off the device.
Noise during operation Normal fan operation or minor obstruction. The fan operates silently, but a faint hum is normal. Check for any loose debris near the fan. If noise is excessive, contact support.

Specifications

Feature Detail
Brand STARTRC
Compatible Action Camera Brand DJI
Model Number DJI Pocket 3 (Cooling Radiator)
Material ABS
Type Action Camera Accessories Kits
Dimensions (L x W x H) 90mm (3.54in) x 55mm (2.16in) x 52.8mm (2.07in)
Weight 0.13 kg
Cooling Technology Turbo Fan, Semiconductor Refrigeration Chip
Power Input Type-C
Temperature Control 3 Gears (Manual 1, Manual 2, Auto Intelligent)
Dimensions diagram of the cooling radiator.
Figure 4: Product dimensions.

User Tips

Based on general user feedback for camera accessories and cooling solutions:

  • For optimal cooling, ensure the cooler is attached firmly to the DJI Pocket 3, allowing for maximum contact with the camera's surface.
  • When shooting in very hot environments, consider using the 'AUTO' intelligent mode for dynamic temperature management, or 'Gear 2' for continuous maximum cooling.
  • Always keep the fan intake and exhaust clear of obstructions to maintain efficient airflow.
  • If you notice any condensation forming on the cooler or camera, power off the cooler and allow it to air dry before resuming use. While designed to prevent condensation, extreme humidity changes can sometimes cause it.
  • Regularly check the digital display to monitor the camera's temperature, especially during long recording sessions.

Warranty and Support

For warranty information, technical support, or any inquiries regarding your STARTRC Ice Core Cooling Radiator, please contact the STARTRC Official Store or the retailer from whom you purchased the product. Please retain your proof of purchase for warranty claims.

© 2024 STARTRC. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.