Jonsbo N6

Contents

JONSBO N6 9-bay NAS Case User Manual

Model: N6

1. Product Overview

The N6 is the latest addition to JONSBO's NAS chassis lineup, designed as a versatile NAS, personal PC platform, server, or workstation. It features ample storage bays, full-length graphics card compatibility, and robust cooling support. The chassis supports Micro-ATX (mATX) motherboards and boasts a dual-compartment design with flexible configuration options and a streamlined internal layout. Its aesthetic includes multi-panel MESH ventilation grilles complemented by a narrow wooden accent on the front panel. The front-panel 3-speed fan speed controller allows real-time adjustment based on cooling needs. The N6 is also equipped with dual power supply mounting positions for enthusiast DIY users.

JONSBO N6 NAS Case
JONSBO N6 9-bay NAS Case
Video showcasing the JONSBO N6 NAS Case features and internal layout.

2. Specifications

AttributeValue
ColorBlack
Dimension (W*D*H)305mm * 353mm * 318mm (including 6mm high stand)
Material0.7mm + 1.0mm Steel
Drive Bay9 x 2.5" SSD / 9 x 3.5" HDD (Hot-Swap)
Motherboard SupportITX / M-ATX
PCI Expansion Slots4
Front I/O PortUSB 3.2 Gen2 Type-C*1 / USB 3.0*1 / AUDIO*1 + MIC*1 (2-in-1)
PSU SupportATX ≤ 220mm / SFX ≤ 100mm (Supports dual power supply mode)
Max. CPU Cooler Height≤ 65mm - 160mm
Max. Display Card Length≤ 275mm - 320mm
Fan SupportFront: 2x 120mm or 2x 140mm
Rear: 1x 120mm
Left: 2x 120mm
Right: 2x 120mm
Drive Bay: 2x 120mm
Water Cooling Support240mm
Net Weight7.5kg
JONSBO N6 Product Specification Table
Detailed product specifications for the JONSBO N6 NAS Case.

3. Parts List

Please verify that all components listed below are included in your package.

ItemDescriptionQuantity
AScrews (motherboard, PSU, bracket)20
B3.5" HDD screws37
C2.5" SSD hard drive screws37
DFan Screw12
EStandoff1
FHEX wrench socket1
GGasket10
HCable tie5
IPower adapter cable1
JPower adapter screw3
KSpare plastic buckle1
LSpare screws for plastic buckles2
MRear fan bracket1
NLower power supply rack1
OFront power rack1

4. Parts Diagram

Refer to the diagram below for an overview of the chassis components.

JONSBO N6 Parts Diagram
Front view of the N6 NAS Case with numbered drive bays and front panel controls.
  1. Top cover
  2. ATX power supply bracket
  3. Power supply bracket
  4. Front power rack
  5. Front mesh panel
  6. Hard drive tray
  7. Plastic panel
  8. Bottom cover
  9. Bottom fan bracket
  10. PCIE cover
  11. PCIE card strip

5. Setup Instructions

5.1 Removing the Top Cover

  1. Remove the screws securing the top cover.
  2. Gently push the top cover backward to detach it from the chassis.
Removing Top Cover Diagram
Illustration of removing the top cover by unscrewing and sliding it back.

5.2 Removing the Front Panel

  1. Locate the opening notch at the top of the front mesh plate.
  2. Carefully open the front mesh plate from this notch.
  3. Identify the opening notches on both sides of the plastic panel.
  4. Open the plastic panel by gently prying it from these notches.
Removing Front Panel Diagram
Diagram showing how to detach the front mesh plate and plastic panel.

5.3 Motherboard Installation

  1. Place the motherboard (ITX or M-ATX) into the designated area within the chassis.
  2. Secure the motherboard using the provided screws (Type A) and standoffs (Type E).
Motherboard Installation Diagram
Illustration of motherboard placement and securing with screws.

5.4 Power Supply Installation

The N6 chassis supports various power supply configurations:

5.4.1 Top-Mounted PSU (ATX or SFX)

  1. For ATX power supplies, the supported CPU cooler height is ≤ 65mm.
  2. For SFX power supplies, the supported CPU cooler height is ≤ 75mm.
  3. Install the power supply in the top compartment using the provided power supply mounting bracket.
Top-Mounted PSU Diagram
Diagram showing top-mounted ATX and SFX power supply installations with CPU cooler height limits.

5.4.2 Front-Mounted SFX PSU

  1. Use the included rear fan mounting bracket to block the top-mounted power supply position.
  2. Install the internal power adapter cable.
  3. Use the included SFX power supply mounting bracket to achieve front-mounted installation of the SFX power supply.
  4. In this mode, the maximum supported height of the CPU cooler is ≤ 160mm.
Front-Mounted SFX PSU Diagram
Illustration of front-mounted SFX power supply installation.

5.4.3 Bottom-Mounted SFX PSU

  1. Remove the left fan bracket.
  2. Install the SFX power supply onto the power supply rack located at the bottom of the chassis.
  3. Reinstall the assembled power supply rack back into the chassis.
Bottom-Mounted SFX PSU Diagram
Diagram showing the installation of a bottom-mounted SFX power supply.

5.4.4 Dual Power Supply Mode

The N6 supports dual power supply installation, allowing for independent power supply to the hard disk backplane to ensure stable operation of multiple hard drives. A dual power supply synchronous startup cable/initiator may be required (sold separately).

Dual Power Supply Mode Diagram
Diagram illustrating dual power supply configurations (ATX+SFX and SFX+SFX).

5.5 Power Supply Bracket Adjustment

  1. The power supply bracket is fixed on the right side of the chassis.
  2. Adjust the distance of the bracket to securely support your chosen power supply unit.
Power Supply Bracket Adjustment Diagram
Illustration of adjusting the power supply bracket for proper fit.

5.6 Cable Management

  1. Route CPU power supply and hard disk power supply cables through the designated holes in Area A.
  2. Organize fan cables and hard drive data cables through the holes in Area B.
Cable Management Diagram
Diagram illustrating cable routing paths within the chassis.

5.7 Graphics Card Installation

  1. Remove the PCIE cover and PCIE card strip from the chassis.
  2. Insert the graphics card into the appropriate motherboard slot.
  3. Secure the graphics card with screws.
Graphics Card Installation Diagram
Diagram showing graphics card installation and supported length.

5.8 Hard Disk Backplane Power Supply Connection

  1. Unscrew the four screws on the fan bracket and remove the fan bracket.
  2. Connect the power supply cables to the hard disk backplane as shown in the diagram.

Power Supply Precautions:

  • It is recommended to fully plug in all four power supply heads.
  • Connect a single power cord to only one power supply port. Avoid daisy-chaining power cords to multiple ports.
Hard Disk Backplane Power Connection Diagram
Diagram illustrating SATA and PATA power connections to the hard disk backplane.

5.9 Fan Installation

The chassis supports various fan configurations for optimal cooling:

  • Front panel: 2x 120mm or 2x 140mm fans (supports 240mm radiator).
  • Left side: 2x 120mm fans.
  • Right side: 2x 120mm fans.
  • Rear: 1x 120mm fan.
  • Drive Bay: 2x 120mm fans.
Fan Installation Diagram
Diagram showing various fan mounting locations and sizes for heat dissipation.

5.10 Installing the Top Cover and Fan Bracket

  1. Once all internal components are installed, reattach the fan bracket.
  2. Slide the top cover back into place and secure it with the screws removed earlier.
Installing Top Cover Diagram
Illustration of reinstalling the top cover and fan bracket.

5.11 Hard Drive Installation

  1. Remove the hard drive bracket from the chassis.
  2. Mount your 2.5" SSDs or 3.5" HDDs onto the hard drive trays using the appropriate screws (Type B for 3.5" HDD, Type C for 2.5" SSD).
  3. Insert the filled hard drive trays into the hot-swap bays.
  4. Install the assembled hard drive cage back into the chassis and secure it.
Hard Drive Tray
Close-up of a hard drive tray, showing mounting points for 2.5" SSD and 3.5" HDD.
Hard Drive Installation Diagram
Diagram illustrating the installation of hard drives into the bays.

6. Operating Instructions

6.1 Fan Speed Control

The front panel of the JONSBO N6 features a 3-speed fan speed controller. Use the switch labeled "FAN 1 2 3" to adjust the fan speed according to your cooling needs.

Front Panel Fan Speed Control
Close-up of the front panel showing the 3-speed fan control switch and I/O ports.

6.2 Hot-Swap Drive Bays

The N6 is equipped with 9 hot-swappable drive bays. This allows for easy installation and removal of hard drives without needing to power down the system, facilitating data exchange and storage management.

Hot-Swap Drive Bays
View of the server-grade hot-swap backplane with gold-plated SAS interface.

7. Maintenance

7.1 Cleaning

  • Regularly clean the exterior of the chassis with a soft, dry cloth.
  • Periodically open the chassis and use compressed air to remove dust from internal components, especially fan filters and heatsinks, to maintain optimal airflow and cooling performance.

7.2 Fan Maintenance

  • Check fan operation periodically to ensure they are spinning freely and quietly.
  • If a fan becomes noisy or stops working, consider replacing it to prevent overheating.

8. Troubleshooting

8.1 Power Issues

  • If the system does not power on, ensure all power supply connections are secure.
  • Verify that the power supply cables to the hard disk backplane are fully plugged in.

8.2 Drive Issues

  • If a hard drive is not detected, ensure it is properly seated in its hot-swap bay.
  • Check both power and data connections to the hard drive backplane.

8.3 Cooling Issues

  • If the system is overheating, verify that all fans are operating correctly.
  • Ensure there are no obstructions to airflow within the chassis.
  • Adjust the front panel fan speed controller to a higher setting if necessary.

9. User Tips

  • The modular design of the JONSBO N6 allows for flexible power supply and fan placement, which can be optimized for specific build requirements.
  • For optimal hard drive performance and stability, ensure all four power supply heads to the backplane are fully plugged in, and use a single power cord per power supply port.
  • The compact size and design of the N6 make it suitable for integration into various home or office setups, including fitting perfectly into standard shelving units like IKEA Kallax.

10. Warranty & Support

This product is manufactured by Dongguan Sibositong Industrial Co., Ltd. For warranty information, technical support, or service inquiries, please refer to the official JONSBO website or contact your local distributor.

Specifications are subject to change without prior notice. Any trademarks mentioned may be claimed as the property of their respective owners.

A detailed user manual in PDF format can be found here.

11. Compliance and Safety Information

This product complies with relevant environmental and safety directives. Please dispose of packaging materials responsibly according to local recycling guidelines.

Recycling and Warning Symbols
Recycling and general warning symbols.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.