1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Jebao Wave Pump. Designed for both freshwater and saltwater aquariums, these pumps utilize advanced Sine Wave Technology to create natural water movement, promoting a healthy environment for your aquatic life. Please read this manual thoroughly before use to ensure optimal performance and safety.
2. Product Overview
The Jebao Wave Pump series includes various models (SW, RW, OW, SOW) each designed to provide efficient and quiet water circulation. Key features include variable frequency control, a durable ceramic shaft, and a user-friendly controller for customizing wave patterns and flow rates.
3. Specifications
Refer to the tables below for detailed specifications of each model. Dimensions are approximate and may vary slightly.
3.1. OW Series Specifications
| Model | Voltage | Watts | Max. (L/h) | Tank Size (cm) | Tank Thickness (mm) |
|---|---|---|---|---|---|
| OW-10 | DC 24V | 12 | 4000 | 40-70 | ≤10 |
| OW-25 | DC 24V | 23 | 8500 | 70-100 | ≤12 |
| OW-40 | DC 24V | 35 | 15000 | 100-150 | ≤15 |
| OW-50 | DC 24V | 50 | 20000 | 150-200 | ≤19 |
3.2. SW Series Specifications
| Model | Voltage | Watts | Max. (L/h) | Tank Size (cm) | Tank Thickness (mm) |
|---|---|---|---|---|---|
| SW-2 | DC 12V | 5 | 2500 | 30-40 | ≤8 |
| SW-4 | DC 24V | 10 | 4000 | 60-80 | ≤8 |
| SW-8 | DC 24V | 23 | 8000 | 80-100 | ≤15 |
| SW-15 | DC 24V | 40 | 13000 | 100-150 | ≤19 |
3.3. SOW Series Specifications
| Model | Voltage | Watts | Max. (L/h) | Tank Size (cm) | Tank Thickness (mm) |
|---|---|---|---|---|---|
| SOW-4 | DC 24V | 12 | 4000 | ≤60 | ≤8 |
| SOW-8 | DC 24V | 23 | 8500 | 60-100 | ≤8 |
| SOW-15 | DC 24V | 35 | 15000 | 100-150 | ≤15 |
| SOW-20 | DC 24V | 50 | 20000 | 150-200 | ≤19 |
3.4. RW Series Specifications
| Model | Voltage | Watts | Max. (L/h) | Tank Size (cm) | Tank Thickness (mm) |
|---|---|---|---|---|---|
| RW-4 | DC 24V | 10 | 4000 | ≤60 | ≤8 |
| RW-8 | DC 24V | 23 | 8000 | 60-100 | ≤8 |
| RW-15 | DC 24V | 40 | 13000 | 100-150 | ≤15 |
| RW-20 | DC 24V | 60 | 20000 | 100-150 | ≤19 |
4. Setup Instructions
- Unpack Components: Carefully remove the wave pump, controller, and power adapter from the packaging. Inspect all components for any damage.
-
Mount the Pump:
- Position the pump inside your aquarium at the desired location, ensuring it is fully submerged.
- Attach the external magnetic mount to the outside of the aquarium glass, directly opposite the pump. The strong magnets will hold the pump securely in place.
- Ensure your tank glass thickness is within the recommended limits for your specific model (e.g., ≤8mm for RW-4/8, SW-2/4, SOW-4/8; ≤10mm for OW-10; ≤12mm for OW-25; ≤15mm for RW-15, SW-8, OW-40, SOW-15; ≤19mm for RW-20, SW-15, OW-50, SOW-20).
-
Connect the Controller:
- Connect the pump cable to the designated port on the wavemaker controller.
- Connect the power adapter to the controller, then plug the adapter into a suitable power outlet.
- Initial Power On: Once all connections are secure and the pump is submerged, plug in the power adapter. The pump should start operating according to its default settings.
5. Operating Instructions
The wavemaker controller allows you to customize the pump's operation. Familiarize yourself with the buttons and dial:
-
Mode Button: Press to cycle through different wave patterns (W1, W2, Else, H, C).
- W1 Mode: Classic wave mode, adjustable via the speed dial.
- W2 Mode: Sine wave mode, adjustable via the speed dial.
- Else Mode: Random flow mode, simulating natural ocean currents.
- H Mode: Constant flow mode, adjustable speed.
- C Mode: Alternating flow mode (Master/Slave setup required for two pumps).
- Speed Dial (Fast/Slow): Rotate the dial to adjust the flow rate or wave intensity.
- Feed Button: Activates a 10-minute feeding mode, temporarily stopping the pump to allow fish to eat without food being swept away. Press again to resume normal operation.
- Night Button (Light Sensor): Activates night mode. The built-in light sensor will detect low light conditions and automatically reduce pump speed or switch to a calmer flow pattern.
- Lock Button: Locks the current settings to prevent accidental changes. Press again to unlock.
- Master/Slave Switch: For setups with multiple pumps, set one controller to 'Master' and others to 'Slave' to synchronize wave patterns.
6. Maintenance
Regular maintenance ensures the longevity and efficient operation of your wave pump:
- Disconnect Power: Always unplug the pump from the power outlet before performing any maintenance.
- Clean Impeller: Periodically remove the pump from the aquarium and carefully disassemble the impeller housing. Clean the impeller and its shaft with a soft brush to remove any algae, debris, or calcium buildup.
- Inspect Cables and Connections: Check all cables and connections for signs of wear, damage, or corrosion. Ensure they are securely plugged in.
- Clean Pump Body: Wipe down the exterior of the pump and magnetic mount to remove any buildup.
- Reassemble and Test: Reassemble the pump, ensuring all parts are correctly fitted. Place it back in the aquarium, plug it in, and test its operation.
7. Troubleshooting
If your wave pump is not functioning as expected, refer to the following common issues and solutions:
-
Pump Not Starting:
- Ensure the power adapter is securely plugged into both the controller and the wall outlet.
- Check if the pump cable is firmly connected to the controller.
- Verify that the power outlet is functional.
- Inspect the impeller for any obstructions that might prevent it from spinning.
-
Weak Flow or No Flow:
- Clean the impeller and pump housing to remove any debris or algae buildup.
- Ensure the pump is fully submerged and not drawing air.
- Adjust the speed dial on the controller to a higher setting.
- Check if the pump is in "Feed" mode; press the Feed button to resume normal operation.
-
Excessive Noise:
- Check for any foreign objects lodged in the impeller.
- Ensure the pump is securely mounted and not vibrating against the tank glass.
- Verify that the impeller is correctly seated and not damaged.
-
Controller Not Responding:
- Unplug the power adapter, wait 30 seconds, and plug it back in to reset the controller.
- Ensure the 'Lock' button is not engaged.
8. User Tips
No specific user tips were available from reviews or Q&A for this product.
9. Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
