1. Introduction
Thank you for choosing the SEMBO BLOCK 956 Modern Destroyer Transparent Version Aircraft Carrier building block set. This detailed model provides an engaging construction experience, featuring electric components for dynamic lighting effects and interactive movable parts. Please read this manual carefully before assembly and operation to ensure a safe and enjoyable experience.
Figure 1: The SEMBO BLOCK 956 Modern Destroyer Transparent Version Aircraft Carrier model.
2. Safety Information
- WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- This product contains small parts and is not suitable for children under three (3) years old due to choking hazards.
- Adult supervision is required during assembly and play.
- Product images may differ slightly from the actual product. The actual product shall prevail.
Figure 2: Important safety warnings regarding small parts and adult supervision.
3. Package Contents
The package contains all the necessary building blocks and components to construct the 956 Modern Destroyer. Please verify all parts upon opening the box.
- 2061 plastic building block pieces.
- Electric components for lighting effects.
- Detailed graphic instruction manual.
- Display stand.
Figure 3: Product packaging showing the model and box dimensions.
Note: The packaging box serves as protection for the building block parts and is not specially protected. Minor deformation or incompleteness of the box during transportation is not a product quality issue and cannot be a reason for return or negative feedback. If you require reinforced packaging, please contact customer service after placing your order.
4. Assembly Instructions
Assembly of the SEMBO BLOCK 956 Modern Destroyer requires careful attention to the included graphic instruction manual. Follow the step-by-step diagrams to connect the 2061 pieces correctly.
4.1 Key Assembly Features
- Bridge Interior: The bridge section is designed to lift, revealing the cockpit. This section also features internal lighting.
- Movable Armaments: The anti-ship missile launchers and main gun are designed to be flexible and movable.
- Engine Linkage: The model includes a cool engine linkage system that restores the appearance of steam engine power.
- Internal Structure: The transparent hull allows for a view of the detailed internal structure, showcasing the warship's components.
Figure 4: Detail of the liftable bridge section, revealing the illuminated cockpit.
Figure 5: Press-to-launch anti-ship missiles and flexible movable main gun.
Figure 6: Explore various interactive features such as the mechanical arm, opening helicopter cabin door, and exhaust port cover.
5. Operating Instructions
5.1 Lighting Effects
The model features five distinct RGB lighting effects, powered by either batteries for the bridge interior or a direct Type-C connection (cable not included) for other systems.
- Bridge Interior Lighting: Powered by batteries (not included). Install batteries as per the graphic manual.
- Power System Concentrated Light: Illuminates the internal power system components.
- Running Light 956 Type Logo Nameplate: A distinctive illuminated nameplate.
- Front and Rear Ammunition Bay Lights: Illuminates the missile storage areas.
Figure 7: Overview of the five RGB lighting effects and power supply methods.
5.2 Movable Parts
Engage with the model's interactive features:
- Missile Launchers: Press to simulate launching anti-ship missiles.
- Main Gun: Position the main gun flexibly.
- Mechanical Arm: Operate the mechanical arm for various scenarios.
- Helicopter Cabin Door: Open and close the helicopter bay door.
- Exhaust Port Cover: Manipulate the exhaust port cover.
6. Maintenance
- Cleaning: Use a soft, dry cloth to gently wipe the model. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent warping or discoloration of plastic parts.
- Battery Replacement: If using batteries for lighting, replace them as needed. Ensure correct polarity.
7. Troubleshooting
7.1 Missing Parts
Assembled building block sets are special toy products, and there is a small possibility of missing parts. If you encounter missing parts, please refer to the process outlined in the graphic instruction manual or contact customer support for assistance.
Figure 8: Information on handling missing parts and the assembly process.
7.2 Lighting Not Working
- Check if batteries are correctly installed and not depleted for battery-powered lights.
- Ensure the Type-C power cable (if used) is properly connected to a power source.
- Verify all electrical connections within the model are secure as per the assembly instructions.
8. Specifications
| Feature | Detail |
|---|---|
| Brand Name | SEMBO BLOCK |
| Model Number | 956 (Item No. 208134) |
| Material | Plastic |
| Block Size | Small building block (Compatible with Lego) |
| Is Electric | Yes |
| Recommended Age | 6+ years |
| Origin | Mainland China |
| Number of Pieces | 2061 PCS |
| Product Dimensions (L x W x H) | 80cm x 10cm x 30cm (including display stand) |
| Package Dimensions (L x W x H) | 67cm x 15cm x 40cm |
| Package Weight | 4.0 kg |
Figure 9: Detailed product dimensions.
9. User Tips
- Before starting assembly, organize all pieces by color and shape to streamline the building process.
- Carefully review each step in the graphic manual before attaching pieces to avoid errors.
- Ensure all electrical connections for the lighting system are firmly seated to guarantee proper function.
10. Warranty and Support
For any questions, concerns, or support needs regarding your SEMBO BLOCK 956 Modern Destroyer, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.
11. Compliance
This product complies with relevant safety and quality standards. Please refer to Section 2 for specific warnings and compliance information.