MEKEDE MN-H2

Contents

MEKEDE MN-H2 Android Car Radio Instruction Manual

For Peugeot 408 (2010-2016) & Peugeot 308/308SW

1. Product Overview

The MEKEDE MN-H2 is an advanced Android 14 car multimedia system designed for select Peugeot models. It integrates navigation, entertainment, and communication features into your vehicle's dashboard, enhancing your driving experience with modern technology.

MEKEDE MN-H2 Android Car Radio with key features highlighted
MEKEDE MN-H2 Android Car Radio showcasing its main features including Wireless CarPlay, Android Auto, Cooling Fan, and Rear View Camera support.
MEKEDE MN-H2 installed in a Peugeot 408 dashboard
The MEKEDE MN-H2 head unit seamlessly integrated into a Peugeot 408 dashboard after installation.

Note: MEKEDE and NaviFly are brands from Shenzhen Mekede Technology Co., Ltd.

2. Package Contents

Please check the package for the following items:

Diagram of MEKEDE MN-H2 package contents
Included components: Head unit, Power Cable + Canbus Box, RCA Cable, Reversing Camera, GPS Antenna, USB Cable, and Microphone.
  • Head Unit (MN-H2)
  • Power Cable + Canbus Box
  • RCA Cable
  • Reversing Camera
  • GPS Antenna
  • USB Cable
  • Microphone (MIC)
  • Disassembly Tools (Gift)

3. Setup and Installation

Professional installation is recommended. Ensure the vehicle's power is off before beginning installation.

3.1 Dimensions

Dimensions of the MEKEDE MN-H2 head unit
The head unit features a 7-inch display with approximate dimensions of 270mm (width) x 145mm (height).

3.2 Wiring Diagram

Connect the provided cables according to the diagram below. The Power Cable and Canbus Box are crucial for vehicle integration.

Detailed wiring diagram for the MEKEDE MN-H2 car radio
Back of the main unit with labeled ports:
  • A. Power cable (GND, +12VDC, Key Switch, Reverse Detecting Line, Steering Wheel Control, Front/Rear Speakers)
  • B. RCA Cable
  • C. Digital TV CAN (connect if needed)
  • D. USB interface
  • E. USB interface
  • F. Reverse video cable
  • I. GPS interface
  • H. Radio
  • L. Cooling fan

3.3 Initial Power On

After installation, turn on your vehicle's ignition. The head unit should power on automatically. Follow any on-screen prompts for initial setup.

4. Operating Instructions

4.1 Basic Controls

The head unit features physical buttons and a touch screen for control:

  • VOL: Volume control knob.
  • TUNE: Tuning knob for radio.
  • MIC: Built-in microphone.
  • BAND: Cycle through radio bands.
  • BT: Bluetooth function access.
  • EQ: Equalizer settings.
  • RST: Reset button.
  • Home, Back, Up/Down Arrows: Navigation buttons.

4.2 User Interface (UI) Customization

The device offers over 50 UI themes. To change the UI:

  1. Long press on an empty area of the home screen.
  2. Swipe left to browse through available UIs.
  3. Tap on your preferred UI to apply it.
Steps to customize the UI of the car radio
Visual guide for changing the user interface theme.
Collection of available UI themes for the car radio
A selection of the over 50 UI themes available for personalization.

4.3 Bluetooth Connectivity

Pair your smartphone via Bluetooth for hands-free calling and music streaming.

  1. On the head unit, navigate to the Bluetooth settings.
  2. Ensure Bluetooth is enabled on both the head unit and your phone.
  3. Search for available devices on your phone and select 'Car BT'.
  4. Enter the PIN code (default: 1234) if prompted.
  5. Confirm pairing on both devices.
Video demonstrating Bluetooth pairing, music playback, and calling functions.
Bluetooth functions including music, contacts, and call records
Bluetooth features include music streaming, contact synchronization, and call history.

4.4 Wireless CarPlay & Android Auto

The head unit comes with built-in Wireless CarPlay (for iOS) and Android Auto (for Android) functionality, eliminating the need for additional accessories.

Connection Steps:

  1. Connect your phone via Bluetooth to the head unit.
  2. On the head unit, click on the "Car Lin-K" application and wait for the connection to establish.

CarPlay and Android Auto can also be connected via a USB cable for a wired connection.

Connection steps for Wireless CarPlay and Android Auto
Detailed steps for connecting your iOS device via Wireless CarPlay and Android device via Android Auto.

4.5 GPS Navigation

Utilize the built-in Global Positioning System for omni-directional map display and real-time traffic conditions. The system supports various navigation apps.

GPS Navigation interface showing various map applications
The GPS navigation system supports popular applications like iGO, Sygic, Yandex, Google Maps, Navitel, Waze, and AMAP.

4.6 FM Radio

The FM radio supports automatic and manual station search. You can drag and drop station icons to customize your channel list. RDS (Radio Data System) is supported.

FM Radio interface with station search and presets
The FM radio interface allows for easy tuning and preset management. DAB+ is optional and not included.

4.7 Steering Wheel Control (SWC)

The head unit works with digital SWC to allow control of music and hands-free calling directly from your steering wheel, promoting safer driving.

Steering Wheel Control learning interface
The interface for programming steering wheel controls. Functions include Mode, Power, Volume, Mute, Navi, Band, FM, AM, and Search.

4.8 Intelligent Voice Control (Optional)

For hands-free operation, the device supports intelligent voice control. This feature requires the purchase of voice control software.

Intelligent Voice Control feature demonstration
Intelligent Voice Control allows hands-free operation, supporting multiple languages (English, Arabic, Thai, Indonesian, Russian, Turkish, Spanish, Portuguese, Italian, French).

4.9 AV Output (Optional)

The head unit can output video and audio content to rear headrest displays via a video cable. This function requires purchasing additional accessories (RCA Port or HDMI-compatible adapter).

Diagram showing AV output to rear displays
The AV output feature allows rear passengers to enjoy HD video and audio on separate displays. Requires additional accessories.

4.10 USB Media Playback

The device supports media playback from USB storage devices. Simply connect your USB drive to one of the USB ports.

5. Optional Functional Accessories

Enhance your driving experience with these optional accessories (not included and purchased separately):

  • ADAS DVR Dash Camera: For recording driving footage and advanced driver-assistance features.
  • Rear Parking Camera (AHD 1080P): Provides a clear view behind your vehicle when reversing, with parking lines.
  • Rear View Camera 1080P AHD demonstration
    1080P AHD waterproof rear camera with parking line support for clear rear view.
  • TPMS (Tire Pressure Monitoring System): Monitors tire pressure and temperature in real-time. Available in built-in or external sensor options.
  • TPMS (Tire Pressure Monitoring System) interface
    TPMS interface showing real-time tire pressure and temperature. TPMS is not included.
  • OBD2 Vehicle Functional Status Monitor: Connects to your vehicle's OBD-II port to display real-time data and fault codes.
  • OBD II function display showing vehicle data
    OBD II function allows monitoring of real-time data like oil fuel speed and temperature. OBDII device is not included.
  • SWC Bluetooth Steering Wheel Control: For vehicles without built-in steering wheel controls, an external Bluetooth SWC can be purchased.
  • DAB+: Digital Audio Broadcasting module for enhanced radio quality (optional).

6. Specifications

Feature Specification
Model MN-H2
Operating System Android 14
Chipset 4 Core (Processor Type: 8227L)
RAM 2 GB
ROM 32 GB
Max External Memory 256G
Display Size 7"
Resolution 1024*600
Touch Screen Yes
Built-in DVD Player No
Built-in CD Player No
TF/Micro SD Slot 0
Din Type Double Din
Interface Plug and play
Out Power 4*45W
Voltage 12 V
Item Weight 1.4kg
Digital Media Format CD, DVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA, JPEG
OSD Language Chinese (Simplified), Chinese (Traditional), Arabic, Polish, Russian, French, Filipino, Finnish, Georgian, Korean, Dutch, Czech, Latvian, Romanian, Norwegian, Portuguese, Japanese, Slovak, Slovenian, THAI, Hebrew, Greek, Spanish, Italian, English
Certification CE, RoHS, WEEE
Material Type Metal and Plastic
BT Module Support (BT4.1)
Radio FM RDS (Radio Chip: MT6625LN)
AHD Camera Support
DVR Support
CarPlay Support (Wireless)
Android Auto Support
AI Voice Support (Optional)
GPS Navigation Support
WiFi Support
Cooling Fan Yes
AMP IC YD7388
Configuration Parameter table for MEKEDE MN-H2
Detailed configuration parameters for the MN-H2 model.

7. Maintenance

To ensure the longevity and optimal performance of your MEKEDE MN-H2 car radio, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents that could damage the surface.
  • Software Updates: Periodically check for software updates to ensure you have the latest features and bug fixes. Updates can usually be found in the system settings under "About Car Device" or on the manufacturer's website.
  • Temperature: Avoid exposing the unit to extreme temperatures, both hot and cold, for extended periods.
  • Ventilation: Ensure the cooling fan (if present) is not obstructed to prevent overheating.

8. Troubleshooting

If you encounter issues with your MEKEDE MN-H2, try the following solutions:

  • No Power:
    • Check all power connections to ensure they are secure.
    • Verify the vehicle's fuse related to the car radio is intact.
  • No Sound:
    • Check the volume level on the head unit and your phone (if connected via Bluetooth/CarPlay/Android Auto).
    • Ensure speaker wires are correctly connected.
    • Verify the audio output settings in the system.
  • Bluetooth/CarPlay/Android Auto Connection Issues:
    • Ensure Bluetooth is enabled on both devices.
    • Forget the device on both the head unit and your phone, then attempt to re-pair.
    • Restart both the head unit and your phone.
    • Try a different USB cable for wired connections.
  • GPS Signal Loss:
    • Ensure the GPS antenna is properly installed and has a clear line of sight to the sky.
    • Move the vehicle to an open area away from tall buildings or dense foliage.
  • Touch Screen Unresponsive:
    • Perform a soft reset using the RST button.
    • Ensure the screen is clean and free of debris.

If problems persist, contact customer support for further assistance.

9. User Tips

  • Regular Updates: Keep your system software updated to benefit from performance improvements and new features.
  • Backup Settings: Before major software updates or resets, consider backing up your personalized settings if the option is available.
  • Screen Care: Use a screen protector to prevent scratches and keep the display clear.
  • Voice Control Activation: If using optional voice control, familiarize yourself with the commands for seamless hands-free operation.
  • Customizing Home Screen: Experiment with different UI themes and widget layouts to create a personalized and efficient home screen.

10. Warranty and Support

The MEKEDE MN-H2 car radio comes with a 3-year warranty. For any issues or support inquiries, please refer to your purchase documentation or contact the seller directly.

The product also offers free returns within 15 days of purchase, subject to the seller's return policy.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.