PHYEE 16PLOCK28

Contents

PHYEE 16Pin High to Low Impedance Converter Harness User Manual

Model: 16PLOCK28

1. Introduction

The PHYEE 16Pin High to Low Impedance Converter Harness is designed to seamlessly integrate aftermarket car audio amplifiers or subwoofers with Android car stereos that feature a standard 16-pin power socket. This plug-and-play device converts high-level speaker signals into high-quality, low-level RCA audio outputs, ensuring a clear and noise-free audio experience. Its transformer-type isolation effectively eliminates common audio issues like current hum and ground loop noise, providing high-fidelity sound for your car audio system.

2. Product Features

  • Designed for Android Head Units: Specifically engineered for aftermarket Android car stereos with a standard 16-pin power socket, ensuring a perfect and secure fit.
  • 100% Plug and Play: Offers a hassle-free installation with a direct connection between your vehicle's harness and the Android radio, eliminating the need for wire cutting or splicing.
  • Advanced Transformer Isolation: Utilizes a transformer-type converter for superior circuit isolation, effectively eliminating current hum and ground loop noise for crystal-clear audio.
  • High-Fidelity Audio Conversion: Converts high-level speaker signals into high-quality, low-level RCA audio outputs, enabling the addition of external amplifiers or subwoofers while maintaining sound fidelity.
  • Adjustable Signal Levels: Equipped with dual-channel level adjustment knobs for precise fine-tuning of output gain for both left and right channels, matching your amplifier's requirements.

3. Specifications

AttributeValue
Brand NamePHYEE
Model Name16PLOCK28
Item TypeCables, Adapters & Sockets
Item SizeLine output converter harness (150mm long)
Item Weight0.08kg
Voltage12 V
MaterialCopper
Converter TypeTransformer type High-to-Low converter
DistortionPassive zero distortion
OutputAdjustable output, Double channels RCA audio output (2-Channel RCA)
Connector Type16-pin male-to-female connector
CompatibilitySuitable for 16 pin Android radio

Visual Overview of the Converter

Close-up of the PHYEE K-28 Impedance Converter showing internal transformer, level adjust knobs, and RCA outputs.
Figure 1: Close-up of the PHYEE K-28 Impedance Converter. It features transformer isolation, dual-channel signal level adjustment, and two-channel RCA audio output. This design helps eliminate current hum and ensures a high-fidelity signal.

Transformer Type Advantage

Comparison of transformer-type conversion vs. ordinary resistor conversion, showing cleaner waveforms with transformer type.
Figure 2: Comparison illustrating why a transformer-type converter is preferred. It provides a clean and silent background with lossless sound quality, unlike ordinary resistor conversions which are prone to generating electrical noise.

4. Package Contents

  • PHYEE 16Pin High to Low Impedance Converter Harness (Model: 16PLOCK28) - 1 piece

5. Setup and Installation

The PHYEE 16Pin High to Low Impedance Converter Harness is designed for a straightforward, plug-and-play installation with compatible Android car radios. No cutting or splicing of wires is typically required.

Installation Steps:

  1. Power Off: Ensure your vehicle's ignition is off and the car battery is disconnected before beginning installation to prevent electrical damage.
  2. Locate Radio Harness: Remove your Android car radio from its mounting to access the rear connections. Identify the standard 16-pin power socket on your Android radio.
  3. Connect Converter Harness:
    • Connect the male 16-pin connector of the PHYEE harness to the 16-pin power socket on your Android radio.
    • Connect the female 16-pin plug of the PHYEE harness to your vehicle's existing wiring harness.
  4. Connect to Amplifier:
    • Identify the speaker output wires from your vehicle's harness that are now connected through the PHYEE converter harness. These are typically Green/Green-black striped for the Left Rear speaker and Purple/Purple-black striped for the Right Rear speaker.
    • The impedance converter unit will have two RCA audio outputs (white for left, red for right). Connect these RCA outputs to the corresponding RCA inputs on your car audio amplifier.
  5. Secure Wiring: Ensure all connections are secure and properly insulated. Route the cables neatly to avoid interference or damage.
  6. Restore Power: Reconnect your car battery and re-install the Android radio into its mounting.

Visual Installation Guide:

Plug and play diagram showing the connection flow from 16 Pin Connector to 16 Pin Android radio via the PHYEE harness and then to a 16 Pin Plug.
Figure 3: Plug and Play Connection Diagram. This illustrates how the 16-pin male connector of the harness plugs into the Android radio, and the 16-pin female plug connects to the vehicle's wiring harness.
Wiring diagram for Safe High-to-Low Conversion, showing rear speaker wires (Green, Green/black, Purple, Purple/black) connecting to the impedance converter, which then outputs to a car audio amplifier via RCA.
Figure 4: Safe High-to-Low Conversion Wiring. This diagram details the connection of rear speaker wires (Green, Green/black for Left; Purple, Purple/black for Right) to the impedance converter, which then provides RCA outputs to a car audio amplifier.

Product Demonstration Video:

Video 1: A brief demonstration of the PHYEE 16Pin High to Low Impedance Converter Harness, showcasing its physical appearance and connection points.

6. Operation

Once installed, the impedance converter operates passively, requiring no external power. The primary operational aspect involves adjusting the output signal levels.

Adjusting Signal Levels:

  • The converter features dual-channel level adjustment knobs (labeled "LEVEL ADJUST" on the unit).
  • These knobs allow you to fine-tune the output gain for the left and right RCA channels.
  • Use a small screwdriver to carefully turn the "LEVEL ADJUST" knobs.
  • Start with the levels set to a lower position and gradually increase them while listening to your audio system. Adjust until you achieve a balanced and clear sound without distortion, matching the input sensitivity of your external amplifier.
  • Proper adjustment ensures optimal sound quality and prevents overdriving your amplifier.

7. Maintenance

The PHYEE Impedance Converter is a low-maintenance device. Follow these guidelines to ensure its longevity and optimal performance:

  • Keep Dry: Avoid exposing the unit to moisture or liquids.
  • Clean Connections: Periodically check and ensure all electrical connections are clean and free from dust or corrosion.
  • Secure Mounting: Ensure the converter unit is securely mounted and not subject to excessive vibration or physical stress.
  • Avoid Extreme Temperatures: Do not expose the device to extreme heat or cold, as this can affect its electronic components.

8. Troubleshooting

If you encounter issues with your PHYEE Impedance Converter, refer to the following troubleshooting tips:

Common Issues and Solutions:

  • No Sound Output:
    • Check all connections: Ensure the 16-pin connectors are firmly seated and the RCA cables are correctly plugged into both the converter and the amplifier.
    • Verify amplifier power: Confirm your external amplifier is receiving power and is turned on.
    • Check Android radio settings: Ensure the audio output settings on your Android radio are configured correctly for external amplification.
    • Adjust level knobs: Make sure the "LEVEL ADJUST" knobs on the converter are not set to minimum.
  • Distorted Sound:
    • Adjust level knobs: If the sound is distorted, the output level from the converter might be too high for your amplifier's input. Slowly decrease the "LEVEL ADJUST" knobs until the distortion is gone.
    • Check amplifier gain: Ensure the gain settings on your external amplifier are not set too high.
    • Inspect wiring: Look for any damaged or loose wiring that could cause signal interference.
  • Humming or Buzzing Noise (Ground Loop Noise):
    • The transformer isolation in this converter is designed to eliminate ground loop noise. If hum persists, double-check all ground connections in your audio system.
    • Ensure the converter itself is not touching any metal parts of the car chassis that could introduce a ground loop.
    • Verify the integrity of the RCA cables; faulty cables can sometimes introduce noise.
  • Intermittent Sound:
    • Check for loose connections at all points (16-pin, RCA).
    • Inspect cables for damage or kinks.

9. User Tips

  • For best audio quality, ensure that the "LEVEL ADJUST" knobs are set to provide a strong signal to your amplifier without causing clipping or distortion. It's often best to set the converter's output to about 75% of its maximum, then fine-tune the amplifier's gain.
  • While the device is plug-and-play, always refer to your Android radio's manual for specific wiring diagrams or audio output configurations.
  • Consider using high-quality shielded RCA cables to further minimize potential noise interference in your car audio system.

10. Warranty and Support

This PHYEE product is manufactured with high-quality materials and undergoes strict quality control. For any technical assistance or warranty inquiries, please contact the PHYEE customer support team or your authorized dealer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.