Assark PH960S

Contents

Assark PH960S Trail Camera User Manual

64MP 4K with Fixed Solar Panel, 6000mAh Game Camera

1. Introduction

Thank you for choosing the Assark PH960S Trail Camera. This manual provides detailed instructions for setting up, operating, and maintaining your camera to ensure optimal performance. The PH960S is designed for wildlife monitoring, farm security, and home surveillance, offering high-resolution imaging, robust weather protection, and convenient wireless control.

Assark PH960S Trail Camera overview with key features
Figure 1: Assark PH960S Trail Camera highlighting 0.1s trigger, 4K video, 64MP photos, and IP66 waterproofing.

2. Product Features

  • High Resolution: Captures 64MP photos and 4K UHD videos at 30fps.
  • Integrated Solar Panel: Built-in solar power with an upgraded 6000mAh Lithium battery for extended operation.
  • Advanced Night Vision: Enhanced 850nm IR LEDs provide clear nighttime images and videos up to 65ft.
  • Fast Trigger Speed: Ultra-fast 0.1s trigger speed to capture fleeting moments.
  • Durable & Waterproof: IP66 waterproof rating and full-seal design for reliable performance in various weather conditions.
  • Wireless Connectivity: Built-in low-power WiFi and Bluetooth for app control and easy media management.
  • Versatile Mounting: Supports multiple installation methods (wall/roof mount, strap).
  • User-Friendly App: "TrailCam Go" mobile app (iOS/Android) for previewing, downloading, and configuring camera settings.
  • Storage: Supports micro memory cards up to 128GB (32GB micro SD card pre-installed).

3. Setup Guide

3.1. Powering the Camera

  1. The camera comes with a built-in 6000mAh Lithium battery and an integrated solar panel.
  2. For initial use or if the battery is low, you can charge the camera via the optional USB-C charging port.
  3. Ensure the solar panel is exposed to direct sunlight for continuous power.
Wireless Solar Trail Camera with 6000mAh battery, fixed solar panel, and USB-C charging options, showing two mounting ways.
Figure 2: Power options and two mounting methods for the trail camera.

3.2. Inserting the Memory Card

  • The camera supports micro memory cards up to 128GB. A 32GB micro SD card is pre-installed.
  • Locate the memory card slot, usually protected by a waterproof cover.
  • Insert the micro SD card with the gold contacts facing the camera's front, until it clicks into place.

3.3. Mounting the Camera

The camera offers two primary mounting options:

  • Strap Mount: Use the provided strap to secure the camera to a tree or pole.
  • Wall/Roof Mount: Utilize the included mount to fix the camera to a wall or roof.

Ensure the camera is securely fastened and the solar panel has an unobstructed view of the sky for optimal charging.

3.4. Waterproofing

The camera has an IP66 waterproof rating. To maintain this protection, always ensure all covers, especially the waterproof cover for ports and card slots, are sealed tightly after accessing them.

IP66 Waterproof features, showing protection against various weather conditions and a reminder to seal the waterproof cover.
Figure 3: IP66 Waterproof protection and the importance of sealing the cover.

4. Operating Instructions

4.1. Basic Operation Modes

The PH960S offers three capture modes:

  • Photo Mode: Captures still images.
  • Video Mode: Records video clips with sound.
  • Photo and Video Mode: Captures a photo followed by a video clip.

4.2. Motion Detection and Trigger Speed

The camera features an adjustable PIR (Passive Infrared) sensor for motion detection.

  • You can set the detection sensitivity and detection interval as needed via the mobile app.
  • Customize the detecting area to focus on specific zones, reducing unnecessary captures.
  • Once movement is detected within a 65ft range, the camera will trigger in less than 0.1 seconds.
Image showing how to customize the detecting area to capture specific movements.
Figure 4: Customizing the detecting area to optimize capture.

4.3. Night Vision

The camera is equipped with enhanced 850nm IR LEDs and advanced image sensors for superior night vision performance, allowing you to capture clear images and videos without disturbing wildlife.

Comparison of 65FT Super Night Vision with enhanced 850nm LEDs versus traditional 940nm LEDs.
Figure 5: Superior 65FT Super Night Vision with 850nm IR LEDs.

4.4. WiFi Connection and App Control

To manage your camera wirelessly:

  1. Download the free mobile app "TrailCam Go" from your device's app store (available for iOS and Android).
  2. Enable Bluetooth on your mobile device.
  3. Open the "TrailCam Go" app and follow the instructions to connect to your PH960S camera via its built-in low-power WiFi hotspot.
  4. Once connected, you can:
    • Preview captured pictures and videos.
    • Download media to your phone.
    • Delete unwanted files.
    • Adjust camera settings (e.g., Customize Detecting Area, Time Stamp, Time Lapse, Operation Hours, Sound Recording, Programmable Timezone, Loop Recording, Password Protection).

Note: The camera connects to your phone via its own hotspot WiFi. It does NOT support connecting to home Wi-Fi networks. The effective connection range between your phone and the camera is approximately 45ft (13.7m).

Diagram showing WiFi connection and app control for the trail camera, with a phone displaying live view and settings.
Figure 6: Wireless control via the 'TrailCam Go' app.

4.5. Video and Photo Quality

The camera captures stunning 4K UHD videos at 30 frames per second and high-detail 64-megapixel photos, ensuring you get clear and vibrant recordings of wildlife.

Image illustrating the high quality of 4K 30FPS UHD Videos and 64MP Photos.
Figure 7: High-quality 4K video and 64MP photo capture.

5. Maintenance

  • Battery Management: The integrated solar panel helps maintain battery charge. For optimal performance, ensure the solar panel is clean and receives adequate sunlight. Periodically check the battery level via the app.
  • Waterproof Seal: Regularly inspect the waterproof seals around the battery compartment, USB-C port, and memory card slot. Ensure they are free from dirt and properly closed to prevent water ingress.
  • Lens Cleaning: Gently clean the camera lens and PIR sensor window with a soft, lint-free cloth. Avoid abrasive materials that could scratch the surfaces.
  • Storage: Periodically review and delete old or unnecessary files from the micro SD card to free up space and maintain camera performance.

6. Troubleshooting

Problem Possible Cause Solution
Camera not powering on Low battery; Incorrect battery installation. Charge the battery via USB-C or expose solar panel to sunlight. Check battery orientation.
Poor night vision quality IR LEDs obstructed; Object too far; Dirty lens. Ensure no obstructions. Place camera closer to target. Clean the lens.
Camera not detecting motion PIR sensitivity too low; Obstructions in detection area; Incorrect placement. Increase PIR sensitivity via app. Clear detection area. Adjust camera angle.
Cannot connect to app via WiFi Out of range (45ft limit); Bluetooth not enabled; App issue. Move closer to the camera. Ensure Bluetooth is on. Restart app/phone.
Short battery life Insufficient sunlight for solar panel; High activity/frequent triggers; Cold weather. Relocate camera for better sun exposure. Adjust trigger interval/sensitivity.
Memory card error Card full; Corrupted card; Incorrectly inserted. Format or replace the SD card. Reinsert card correctly.

7. Specifications

Feature Specification
Photo Resolution 64 Megapixels
Video Resolution 4K UHD @ 30fps (with sound)
Battery Built-in 6000mAh Lithium, Solar Panel, Optional USB-C Charging
Waterproof Rating IP66
Night Vision Enhanced 850nm IR LEDs, up to 65ft range
Trigger Speed Less than 0.1 seconds
Motion Detection Range 65ft
Memory Card Support Micro SD card up to 128GB (32GB included)
Connectivity Low-power WiFi, Bluetooth
App Compatibility "TrailCam Go" (iOS/Android)
WiFi Connection Range Approx. 45ft (13.7m)
Material POLYESTER
Recommended Use Game & Trail, Outdoor

8. Warranty and Support

For technical assistance or support, please utilize the exclusive Online Technical Support available through the "TrailCam Go" app. Our support team is ready to answer your questions in real-time.

Specific warranty details are not provided in the product description. Please refer to your purchase documentation or contact the seller directly for warranty information.

9. User Tips

  • Optimal Solar Charging: Position the camera in an area that receives maximum direct sunlight throughout the day to ensure the solar panel efficiently charges the battery. Avoid shaded areas.
  • Strategic Placement: For best motion detection, place the camera at a height of 3-6 feet (1-2 meters) and aim it slightly downwards. Consider the direction of animal movement to ensure they cross the detection zone rather than moving directly towards or away from the camera.
  • WiFi Range Awareness: Remember the 45ft WiFi connection limit. When checking footage or adjusting settings via the app, ensure you are within this range for a stable connection.
  • Regular Checks: Periodically check the camera's status, battery level, and memory card capacity via the app to prevent missed recordings or power issues.
  • Secure Mounting: Always double-check that the camera is securely mounted to prevent it from falling or being dislodged by wind or animals.

© 2024 Assark. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.