Introduction
This manual provides instructions for the UGREEN 140W USB C Cable, a versatile 5FT (1.5M) 2-in-1 cable designed for high-speed charging and data transfer. It supports up to 140W Power Delivery (PD3.1) for single devices and intelligently distributes power for simultaneous charging of two devices. Constructed with durable nylon braiding and an aluminum alloy shell, this cable is built for longevity and reliable performance.
Setup
The UGREEN 140W USB C Cable is designed for plug-and-play functionality. No complex setup is required.
- Connect to Power Source: Plug the main USB-C end of the cable into a compatible USB-C power adapter (e.g., wall charger, power bank) or a device with a USB-C port that provides power (e.g., laptop).
- Connect to Device(s): Connect one or both of the split USB-C ends to your device(s) for charging or data transfer. Ensure the connectors are fully inserted into the ports.
This cable is compatible with a wide range of USB-C enabled devices, including MacBook Pro, iPad Pro, iPhone 15/16/17 series, and Galaxy S25 Ultra, among others.

Image: UGREEN 140W USB C Cable illustrating its sufficient length with a 32cm forked section.
Operating Instructions
Charging
- Single Device Charging: When only one of the split USB-C ends is connected to a device, the cable can deliver up to 140W max fast charging. For example, it can charge a MacBook Pro 2024 from 0% to 56% in approximately 30 minutes.
- Simultaneous Dual Device Charging: When both split USB-C ends are connected to two separate devices, the cable's built-in dual PD 3.1 chips and smart control feature intelligently distribute power between the two devices. This optimizes charging efficiency and shortens overall charging time.

Image: UGREEN 140W USB C Cable demonstrating 140W max single device charging, showing a MacBook Pro charging to 56% in 30 minutes.

Image: UGREEN 140W USB C Cable in use, charging two devices simultaneously in a car and at a desk, highlighting its 2-in-1 functionality.
Intelligent Power Distribution Table
The following table illustrates the recommended adapter power and how power is distributed when charging one or two devices:

Image: A table detailing the intelligent power distribution of the UGREEN 140W USB C Cable based on recommended adapter power and the number of connected devices.
Data Transfer
- Connect the UGREEN 140W USB C Cable between two compatible USB-C devices (e.g., smartphone to laptop).
- The cable supports data transfer speeds of up to 480Mbps (USB 2.0 standard). This allows for quick transfer of files such as 1GB movies, music, documents, or entire photo libraries in less than a minute.
- Important Note: This cable only supports one-to-one data transmission at a time. The first device connected will be prioritized for data transfer. This cable does not support video output.

Image: UGREEN 140W USB C Cable facilitating 480Mbps data transfer between a smartphone and a laptop.
Maintenance
- Cleaning: To clean the cable, gently wipe it with a soft, dry cloth. Avoid using harsh chemicals, abrasive cleaners, or excessive moisture, as these can damage the cable's materials.
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures. When storing, coil the cable loosely to prevent kinks or sharp bends, which can stress the internal wires and outer braiding.
- Durability: The UGREEN 140W USB C Cable is designed with a tough nylon braided material and an aluminum alloy shell, capable of withstanding over 10,000 bend tests. Despite its durability, avoid excessive force, sharp pulling, or twisting, which can reduce its lifespan.

Image: UGREEN 140W USB C Cable showcasing its durability features, including 10,000+ bend tests, an upgraded core, and an aluminum alloy shell.
Troubleshooting
- Device Not Charging:
- Ensure both ends of the cable are securely connected to the power source/device and the receiving device.
- Verify that your power adapter is functioning correctly and capable of providing sufficient wattage for your device(s).
- Test the cable with another device or power adapter to determine if the issue lies with the cable or other components.
- Slow Charging:
- Confirm that your power adapter supports fast charging protocols (e.g., PD3.1) and delivers adequate wattage for the cable's 140W capacity.
- When charging two devices simultaneously, power is distributed. If one device requires high power, the second device may charge at a reduced speed. Refer to the Intelligent Power Distribution table for expected wattage.
- Data Transfer Not Working:
- Ensure both connected devices support data transfer over USB-C.
- Remember that the cable supports one-to-one data transmission. Disconnect any other devices if you are attempting data transfer.
- Verify that the connected device is configured to allow data transfer (e.g., 'File Transfer' mode on Android devices).
- Cable Appears Damaged: Discontinue use immediately if the cable shows any signs of physical damage, such as fraying, exposed wires, or damaged connectors.
Specifications
| Feature | Detail |
|---|---|
| Brand | UGREEN |
| Model Number | L533-75005 (75005) |
| Connector Type | USB Type C (Type-C to Type-C) |
| Cable Type | Braided, Data Transfer |
| Color | Black (Space Gray) |
| Material | Nylon Braided, Aluminum Alloy Shell |
| Max Wattage | 140W (PD3.1) |
| Length | 1.5 Meters (5FT) |
| Data Transmission Speed | USB 2.0 (480Mbps) |
| Conductor | Tinned Copper, Pure Copper |
| Function | Charging + Data Transfer |
| Origin | Mainland China (Guangdong) |
Warranty and Support
Guangzhou Likai Electronic Technology Co., Ltd. provides after-sales services for this product. Any issues you report will receive a response within 24 hours, with specific actions taken within 48 hours.
Warranty Exclusions:
The warranty does not cover:
- Damage caused by human factors.
- Damage resulting from improper operation or misuse.
- Products that are no longer in a resalable condition.
- Defects that were not reported before the product's initial use.
For valid warranty claims, products will be replaced within the specified guarantee period, provided the damage is not due to the aforementioned exclusions. Please check the quality of the products before using them and inform us immediately if any defects are found.
User Tips
- Optimal Fast Charging: To achieve the maximum 140W fast charging speed, ensure you pair this cable with a power adapter that supports PD3.1 and can deliver 140W or higher output.
- Power Distribution Awareness: When charging two devices simultaneously, understand that the total power is distributed. If one device is a high-power consumer (like a laptop), it will draw more wattage, which may result in a slower charging rate for the second connected device.
- Cable Longevity: Always handle the cable gently. Avoid sharp bends, kinks, or excessive pulling, especially near the connectors. Storing it neatly coiled will help extend its lifespan.