RODEDIO V600

Contents

RODEDIO V600 OBD2 Diagnostic Scanner User Manual

Model: V600 | Brand: RODEDIO

1. Introduction

The RODEDIO V600 is a multi-functional vehicle fault diagnosis instrument designed to provide comprehensive diagnostic capabilities. It supports nine OBD II/EOBD standard protocols, ensuring wide compatibility with a variety of vehicles. This device is plug-and-play, allowing for quick reading of vehicle fault information and parameters. Please read this manual carefully before using the product to ensure proper operation and safety.

Key Features:

  • High Compatibility: Works seamlessly with most American cars manufactured after 1996, Asian cars after 2004, and European cars produced after 2000.
  • User-Friendly Interface: Intuitive design with clear instructions and a simple button layout for easy operation, even for users without prior technical knowledge.
  • Durable and Portable Design: Constructed with high-quality materials to withstand daily use, featuring a compact and lightweight design for convenient portability.
  • Full OBDII Modes: Supports all OBDII diagnostic modes.
  • Live Data Stream: Displays real-time vehicle data.
  • Battery Voltage Test: Allows for quick battery health checks.
  • Faster Processing Chip: Ensures efficient and rapid diagnostics.
  • Extensive DTC Library: Contains a library of 35,901 Diagnostic Trouble Code (DTC) definitions.
RODEDIO V600 OBD2 Diagnostic Scanner highlighting key features
Figure 1: RODEDIO V600 OBD2 Diagnostic Scanner with highlighted features including Full OBDII Modes, Live Data Stream, Battery Voltage Test, Faster Processing Chip, and 35,901 DTC Library.

2. Specifications

AttributeValue
ModelV600
Item TypeCode Readers & Scan Tools
Automotive Fit TypeUniversal fit
Battery IncludedNo
Wireless SupportNo
Wireless FunctionNo
High-concerned chemicalNone
OriginMainland China
Power ModeUSB
Operating Voltage≤36V
Battery PropertiesWithout Battery
Dimensions (Height)15.8 cm (6.2 inches)
Dimensions (Width)9.6 cm (3.7 inches)
Weight0.236 kg
Dimensions of the V600 OBD2 Diagnostic Scanner
Figure 2: Physical dimensions of the V600 OBD2 Diagnostic Scanner.

3. Safety & Warnings

WARNING: To avoid danger of suffocation, keep this bag away from babies and children. Do not use this bag in cribs, beds, carriages, or playpens. This bag is not a toy.
  • Do not allow this product to be heated or placed close to fire sources.
  • Do not expose the product to direct sunlight for a long time.
  • Do not attempt to disassemble this product or make any modifications, as it does not contain any user-serviceable repair components.
  • Do not use this product in rain or wet conditions.
  • If you do not plan to use this product for a long time, store it in a dry environment to avoid extreme temperatures and dust.
  • The product is not compatible with new energy vehicles, hybrid vehicles, and vehicle types that do not conform to the OBD2 agreement.

4. Setup

Before First Use:

  • Remove all protective films from the device screen and body.

5. Operation

Basic Operation:

To begin diagnostics:

  1. Ensure the car's ignition is OFF.
  2. Locate the vehicle's OBD-II interface (typically under the dashboard).
  3. Plug the V600 scanner's 16-pin connector into the car's OBD-II interface.
  4. Turn the car's ignition ON (do not start the engine yet).
  5. The scanner will power on automatically. Follow the on-screen prompts to activate the ignition and start the engine if required for specific diagnostic functions.
V600 OBD2 Scanner connected to a car, showing engine fault diagnosis and function keys
Figure 3: The V600 scanner performing engine fault diagnosis, with an overview of its 2.4-inch color screen, function keys (F1, F2, EXIT, OK, arrow keys), and the 16-pin interface. Connection status indicators are: Red for fault code, Yellow for connection failed, Green for connection successful.

Reading Car Information:

The V600 can display various car information, including Freeze Frame data and I/M Readiness status. This allows for quick assessment of vehicle conditions and emission system status.

V600 displaying Freeze Frame and I/M Readiness data
Figure 4: The V600 displaying 'Freeze Frame' data (e.g., DTCFRZE P0103, FUELSY1, LOAD_PCT) and 'IM' (I/M Readiness) status (e.g., MIL Status, Misfire Monitor, Fuel System Mon).

Fault Code Library:

The device includes a comprehensive fault code library with 35,901 definitions, enabling quick querying of diagnostic trouble codes.

V600 displaying its extensive fault code library
Figure 5: The V600's fault code library, indicating its capacity to quickly query 35,901 fault code definitions.

6. Maintenance

  • Do not use abrasive cleaners to clean this product. Use a soft, damp cloth for cleaning.
  • Keep the device free from dust and moisture.
  • Store in a cool, dry place when not in use.

7. Compliance Information

2014/30/EU Electromagnetic Compatibility:

The device complies with the following standards:

  • EN IEC 61326-1:2021
  • EN IEC 61000-3-2: 2019/A1: 2021
  • EN 61000-3-3: 2013/A2: 2021

2011/65/EU RoHS:

The device complies with the following standards:

  • IEC 62321-5:2013
  • IEC 62321-4:2013+AMD1:2017
  • IEC 62321-6: 2015
  • IEC 62321-7-2:2017
  • IEC 62321-8: 2017

8. Warranty & Support

For warranty information, technical support, or service inquiries, please contact the seller or refer to the product packaging for specific contact details. Keep your purchase receipt as proof of purchase.

© 2025 RODEDIO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.